• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.595-605
• /
• 2017

The present article reported the thermal buckling strength of the sandwich shell panel structure and subsequent improvement of the same by embedding shape memory alloy (SMA) fibre via a general higher-order mathematical model in conjunction with finite element method. The geometrical distortion of the panel structure due to the temperature is included using Green-Lagrange strain-displacement relations. In addition, the material nonlinearity of SMA fibre due to the elevated thermal environment also incorporated in the current analysis through the marching technique. The final form of the equilibrium equation is obtained by minimising the total potential energy functional and solved computationally with the help of an original MATLAB code. The convergence and the accuracy of the developed model are demonstrated by solving similar kind of published numerical examples including the necessary input parameter. After the necessary establishment of the newly developed numerical solution, the model is extended further to examine the effect of the different structural parameters (side-to-thickness ratios, curvature ratios, core-to-face thickness ratios, volume fractions of SMA fibre and end conditions) on the buckling strength of the SMA embedded sandwich composite shell panel including the different geometrical configurations.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.174-179
• /
• 2000

Proposed in the paper is a V-FMS (Virtual Flexible Manufacturing System) model to be used as a prototyping tool for FMS design. The proposed V-FMS framework follows an object-oriented modeling (OOM) paradigm and is based on a set of user requirements for FMS prototyping. The V-FMS model consists of four types of object: virtual device, transfer handler, state manager and flow controller. A virtual device model, which corresponds to a static model in OOM, consists of two parts, shell and core, for reusability. A transfer handler corresponds to a functional model of OOM and it stores low level device commands required to perform job flow operations between giving and taking devices. The state manager and the flow controller constitute a dynamic model of OOM. The proposed V-FMS model has been implemented for a couple of linear type FMS-lines

• Composites Research
• /
• v.28 no.2
• /
• pp.58-64
• /
• 2015

The purpose of this paper is to suggest the effective equivalent finite element model for the impact limiter of a nuclear spent fuel shipping cask made of sandwich composite panels. The sandwich composite panels were composed of a metallic facesheet and a core material made of urethane foam, balsa wood and red wood, respectively. The effective equivalent finite element model for the impact limiter was proposed by comparing the results of low-velocity impact test of sandwich panels. An explicit finite element analysis based on LS-DYNA 3D was done in this study. The results showed that the solid elements were recommended to model the facesheet and core of sandwich panels for impact limiter compared to combination modeling method, in which the layered shell element for facesheet and solid element for core material are used. In particular, the solid element for balsa and red wood core materials should be modeled by the element elimination approach.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.9-16
• /
• 2010

In this study, structural analyses were carried out on the composite sandwich panel which was tested under compression loading. In the structural analyses, three types of finite element modelling were considered and linear buckling analysis and nonlinear analysis were performed for each FE-model. Through the analyses, it was found that shell elements for face parts and solid elements for core part were appropriate for the better prediction of the buckling load of the panel. If the material failure of the face is critical than overall buckling of the sandwich panel, the use of one shell element through the thickness direction was suitable in the FE-model for the better predictions of failure location and failure load.

• Structural Engineering and Mechanics
• /
• v.12 no.4
• /
• pp.363-376
• /
• 2001

Sandwich plates are widely used in lightweight design due to their high strength and stiffness to weight ratio. Due to the heterogeneous structure of sandwich plates, they can exhibit local instabilities (wrinkling), which lead to a sudden loss of stiffness in the structure. This paper presents an analytical solution to the wrinkling problem of sandwich plates. The solution is based on the Rayleigh-Ritz method, by assuming an appropriate deformation field. In contrast to the other approaches up to now, this model takes arbitrary and different orthotropic face layers, finite core thickness and orthotropic core material into account. This approach is the first to cover the wrinkling of unsymmetric sandwiches and sandwiches composed of orthotropic FRP face layers, which are most common in advanced lightweight design. Despite the generality of the solution, the computational effort is kept within bounds. The results have been verified using other analytical solutions and unit cell 3D FE calculations.

• Advances in nano research
• /
• v.13 no.5
• /
• pp.427-435
• /
• 2022

Static stability behaviors of annular sandwich plates constructed from two layers of particle-reinforced nanocomposites have been investigated in the present article. The type of nanoscale particles has been considered to be graphene oxide powders (GOPs). The particles are assumed to have uniform and graded dispersions inside the matrix and the material properties have been defined according to Halpin-Tsai micromechanical model. The core layer is assumed to have honeycomb configuration. Annular plate has been formulated according to thin shell assumptions considering geometrical nonlinearities. After solving the governing equations via Galerkin's technique, it is showed that the post-buckling curves of annular sandwich plates rely on the core wall thickness, amount of GOP particles, sector radius, and thickness of layers.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.771-791
• /
• 2018

This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.3
• /
• pp.243-251
• /
• 2018

The gridded simulation of crop growth, which would be useful for shareholders and policy makers, often requires specialized computation tasks for preparation of weather input data and operation of a given crop model. Here we developed an automated system to allow for crop growth simulation over a region using the DSSAT (Decision Support System for Agrotechnology Transfer) model. The system consists of modules implemented using R and shell script languages. One of the modules has a functionality to create weather input files in a plain text format for each cell. Another module written in R script was developed for GIS data processing and parallel computing. The other module that launches the crop model automatically was implemented using the shell script language. As a case study, the automated system was used to determine the maximum soybean yield for a given set of management options in Illinois state in the US. The AgMERRA dataset, which is reanalysis data for agricultural models, was used to prepare weather input files during 1981 - 2005. It took 7.38 hours to create 1,859 weather input files for one year of soybean growth simulation in Illinois using a single CPU core. In contrast, the processing time decreased considerably, e.g., 35 minutes, when 16 CPU cores were used. The automated system created a map of the maturity group and the planting date that resulted in the maximum yield in a raster data format. Our results indicated that the automated system for the DSSAT model would help spatial assessments of crop yield at a regional scale.

• Geotechnical Engineering
• /
• v.4 no.2
• /
• pp.33-44
• /
• 1988

The Taechong Dam completed in 1980 is a composite dam at which a junction was formed partly by butting the core against the end face of the concrete gravity section and partly by the core overlapping the upstream face of the concrete. In order to evaluate the performance of the junction, the interfaces between the concrete dam and core of the embankment dam were well instrumented with total pressure cells and piezometers. A nonlinear incremental finite element analysis simulating its construction behaviour was carried out under plane strain conditions. Material parameters for the core are determined from triaxial tests on the specimens, sampled in the quarry site and compacted to the field dry density at the field moisture content. Material parameters for the filter, transition materials and the rockfill are estimated from literature. When compared with the earth pressures measured at the interfaces, the analytical results show good agreement in the core, however, there are some discrepancy in the shell. A nonlinear model for pore pressure response is used successfully to predict the pore pressures at the interface in the core.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.395-401
• /
• 2004

In this study, lots of methods have been studing to utilize energy and decrease contaminated effluents. There has been great progress on IGCC (Integrated gasification combined cycle) to reduce thermal energy losses. The following results have been conducted from desulfurization experiments using waste shell to remove $H_{2}S$. Unreacted core model ior desulfuriration rate prediction of sorbent was indicated. These were linear relationship between time and conversion. So co-current diffusion resistance was conducted reaction rate controlling step. The sulfidation rate is likely to be controlled primarily by countercurrent diffusion through the product layer of calcium sulfide(CaS) formed. Maximum desulfurization capacity was observed at 0.631 mm for lime, oyster and hard-shelled mussel. The kinetics of the sorption of $H_{2}S$ by CaO is sensitive to the reaction temperature and particle size at $800^{\circ}C$, and the reaction rate of oyster was faster than the calcined limestone at $700^{\circ}C$.