• 한국분말재료학회지
• /
• 제13권1호
• /
• pp.10-17
• /
• 2006

Model experiment was introduced to obtain the formation of a core/rim structure by only liquid phase reaction in Ti(C, N)-based cermet alloys. Infiltrated Ti(C, N)-Ni, $MO_2C-Ni$, and TaC-Ni cermets were bonded to sandwiched specimen by heat treatment $1450^{\circ}C$ for 5hr. With nitrogen addition, both (Ti, Mo) (C, N) and (Ti, Ta) (C, N) rim structure was nucleated around comer of cuboidal Ti(C, N) core. However, equilibrium shapes of(Ti, Mo) (C, N) and (Ti, Ta) (C, N) rim were different possibly due to the effect of interface energy. The core/rim and rim! binder interfaces were parallel to each other with TaC addition, while rotated to each other with $MO_2C$ addition.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 추계학술강연 및 발표대회
• /
• pp.8-8
• /
• 2002

TiC core/(Ti,Mo)C rim structure in TiC-$Mo_2C$-Ni base cermet which is generally prepared by sintering below 145$0^{\circ}C$ had been believed to be generated by the solid diffusion of Mo atoms 1 into TiC grains (D. Moskowitz and M.Humenik, 1r.:1966). Afterward, it was clarified that the c core/rim structure is generated by solution/re-precipitation mechanism : (1) $Mo_2C$ grains and s small TiC grains dissolve into the Ni liquid, (2) the dissolved Mo, Ti and C atoms migrate to the s surface of TiC coarse grains, (3) the Mo, Ti and C precipitate on the surface of TiC coarse g grains and form (Ti,Mo)C solid solution rim, and (4) the Ostwald ripening (grain growth by s solution/re-precipitation mechanism) of TiC-core/(Ti,Mo)-rim grains continues, and thus the w width of (Ti,Mo)C rim (at the same time, the grain size) increases with sintering time, etc. ( (H.Suzuki, K.Hayashi and O.Terada: 1973). The TiC-core was found not to disappear even by s sintering at 190$0^{\circ}C$ (ibid.: 1974) Recently, FeSi core/$Fe_2Si_5$-rim structure in Fe-66.7at%Si thermoelectric aIloy was found to also h hardly shrink and disappear by long heating at an appropriate temperature (1999: M.Tajima and K K.hayashD. Then, the authors considered its cause, and clarified experimentaIly that the disappearance of FeSi-core/$Fe_2Ski_5$-rim structure could be attributed to the exhaustion of diffusion-contributable vacancies in core/rim structure (N.Taniguchi and K.Hayashi:2001). At p present, the authors and my coworker are investigating whether the non-disappearance of TiC c core can be explained also from the new hypothesis "Exhaustion of diffusion-contributable v vacancies in corelrim structure".ure".uot;.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1417-1423
• /
• 1995

α/β sialon based composites containing silicon nitride whisker and silicon carbide platelet were fabricated by hot pressing. Effect of the reinforcing agents on the α to β phase transformation of the sialon as well as on the mechanical properties was investigated. Silicon nitride whisker and silicon carbide platelet promoted the phse transformation. TEM/EDS analysis revealed that the grain containing the whisker had 'core-rim' structure; core being high purity Si3N4 whisker and rim being β-sialon. Flexural strength of the composite decreased with the reinforcement addition which, on the other hand, improved fracture toughness of it. High temperature strength was measured at 1300℃ to be about 130 MPa lower than that measured at RT for the whisker reinforced composites.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.618-622
• /
• 2000

The '3+1'type condensation of 16-thiatripyrromethane with $N-alkyl-24-bis[(\alpha+hydroxy-\alpha-phenyl)methyl]pvrole$, in the presence of acid catalyst afforded core-modified, N-confused porphyrins bearing alkyl groups at the rim nitrogen. The proton NMR spectra indicate that the bulkiness of the N-alkyl substituents is somewhat relatedwith the tiltedness of the inverted pyrrole ring. The changes in chemical shift of inner methine protons depending on the N-alkyl group and protonation site is discussed.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.230-234
• /
• 1999

Ti(CN)-0.3mole% $Mo_2C$ ceramics were prepared by pressureless sintering. $Mo_2C$ dissolved in Ti(CN) more easily in a nitrogen environment than in the other environment because nitrogen forced Mo to form a solid solution, (Ti, No)(C, N). A "core-rim" structure developed within the grains. The boundary between the "core" and the rim was delineated by thermal etching in the sample with more than 2 mole% $Mo_2C$. The rim thickness and the grain size decreased as the $Mo_2C$ content increased. The hardness and the flexural strength showed maxima of 18.2 GPa and 1.23 GPa, respectively when the $Mo_2C$ content was 2 mole%. The post-sintering heat treatments improved the properties.oved the properties.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.644-645
• /
• 2006

TiC-and Ti(C,N)-based cermets are excellent in semi-and final finishing of work piece during cutting operations. Typical microstructure of the cermets is a core/rim structure. The undissolved Ti(C,N) cores contribute to their high hardness while the rim phases, (Ti,M1,M2)(C,N)-type solid solutions, play great roles in enhancing the toughness. In this paper, various ultrafine pre-mixed MeC-Ni powders were synthesized and the powders were sintered or hot pressed after mixing in order to control the size and volume fractions of core and rim phases in the system. This paper will present the factors determining the microstructure along with mechanical properties.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.625-626
• /
• 2012

A coupled magnetic resonance system (CMRS) using compact coil sets with core driven by a class-E inverter was proposed. The source and load coils of conventional CMRS were replaced with two coils containing core so that the system can be quite compact in size and easy to design due to a resonance frequency for all resonant tanks regardless of coupling factor. Experiments for 500 kHz switching frequency show 40% system efficiency.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.785-792
• /
• 1996

Formation of Solid Solution and Microstructure in Processureless sintered SiC-AlN compo-site using oxides as a sintering aid at 185$0^{\circ}C$ and 195$0^{\circ}C$ Regardless of SiC/AlN ratio in composition most of sintered specimens showed he complex structure mixed with 2H solid solution and SiC particles. High sintering temperature and large AlN content in starting composition enhanced the formation of 2H solid solution in sintered specimen 2H solid solution showed the spherical shape and core-rim structure. AlN content in the core is higher than that in the rim but SiC content . The size of 2H solid solution on fracture showed the transgranular fracture mode compared with the dispersed SiC particles which showed the intergranular fracture mode.

• 자원환경지질
• /
• 제23권1호
• /
• pp.35-57
• /
• 1990

This study has been carried out on the Pegmatites, Naedeogri Granites, Nonggeori Granites and Metasedimentary rocks in the middle area of Taebaeksan region to investigate the geochemical properties and possibility of productivity. Pegmatites are characterized by metamorphosed anatectic pegmatite and differentiated magmatic pegmatite, and are mixed type of rare-element pegmatite and mica-bearing pegmatite by the classification of Ginsburg(1979). The petrological type of the igneous rocks is thought to be calcalkali, subalkaline and peralumious. According to chemical variations against D. I., differentiation trends from Naedeogri and Nonggeori Granites through non-mineralized pegmatites to mineralized pegmatites are supposed. From the relationship between oxided and $SiO_2$, pegmatites and Nonggeori Granite have shown similar tendencies and bulk composition of pegmatites and similar to metasedimentary rocks near the intrusives. By judging the correlations of trace elements, it is elucidated that pegmatites adjacent to Naedeogri and Nonggeori Granites have been originated in magma differentiation from these granites and the others have been differentiated by remelting or partial melting from metasedimentary rocks. $Sp_5$, $Sp_8$, and $Sp_9$ pegmatites are considered as productive rocks, and $Sp_4$, $Sp_6$, $Sp_7$, $Sp_{10}$, $Sp_{11}$, and $Sp_{12}$ pegmatites and granites are supposed to have a weak productivity, in terms of element ratios related with Sn mineralizations. Tourmalines in productive pegmatites are formed under the circumstance of Li-poor granitoids and associated with pegmatites, and the others are seemed to be originated in metapelites and metapsammites which are not coexisting with an Al-saturating phase. Three types of chemical zoning are noticed in tourmalines: (1) apparently homogeneous compositional patterns, (2) a continuous core-to-rim zoning and, (3) a discontinuous core-to-rim zoning. From results of EPMA of tourmalines, Al, Mg and Ca increase closer to rim, while Fe decreases.

• 암석학회지
• /
• 제9권2호
• /
• pp.99-118
• /
• 2000

황강리 지역내 앰피볼라이트에 나타나는 대상 각섬석류의 Na(A), K. Na(M4), Al(IV) 그리고 Al(VI)+Fe3++Ti+Cr의 함량변화를 치화작용의 관점에서 보면 쳐마카이트 치환과 에데나이트 치환 그리고 글로코페인 치환의 정도는 핵부위의 양기석질이 주변부로 감에 따라 감섬석으로 보이는 가장 높은 변성도의 세 시료(M29-2, M26-2, M78)에 존재하는 각섬석들의 치환성분 함량은 더 낮은 변성도의 주연부에서 더 높다. 또한 투휘석을 포함하거나 녹갈색의 감섬석을 보이는 가장 높은 변성도의 세 시료(M29-2, M76-2, M78)에 존재하는 각섬석들의 치환성분 함량은 더 낮은 변성도의 주연부 각섬석보다는 낮고 양기석 보다는 높은 것으로 나타나고 있어 치환작용의 정도가 전체 각섬석류중에서 중간영역에 해당되고 있다. 대상 각섬석류의 성인데 대한 고찰을 해보면 첫째로 두 시료 R120-1와 R210-9가 서로 동일하게 각섬석류의 핵은 양기석질 각섬석이고 주연부는 마그네시안 해스팅사이트에 해당되는데 사장석은 각각 알바이트(R102-1)와 라브라도라이트(R210-9)의 큰 성분격차를 보여주고 있다. 알바이트와 라브라도라이트가 한번의 변성작용으로 동시에 생성되기가 어렵기 때문에 대상 각섬석류는 불혼합 구간(Miscibility gap)이 아닌 다변성작용의 결과로 형성된 것으로 추정된다. 둘째로 양기석과 각섬석간의 접촉면이 광학적으로 뚜렷한 경우와 점이적일 경우 모두 화강암체와 떨어진 거리에 상관없이 본암에 형성되어 있다. 두 광물이 뚜렷한 접촉면을 보여주는 시료의(R210-9, M128, M130) 경우 사장석이 저변성도와 중변성도에서 생성되는 성분을 함께 보여주고 있다. 이런 다양한 성분의 사장석은 불혼합 구간이 형성되는 변성도보다 더 높은 변성도의 변성작용이 중첩되어 있음을 지시하기 때문에 대상 각섬석류가 다변성작용에 의해 성장한 것을 의미한 준다. 또한 광물간에 점이적인 접촉면을 갖는 경우도 이 조직이 주로 화강암체 주변에서 산출된다는 사실과 변성도의 고찰 등을 통해 다변성작용의 영향에 기인한 것으로 생각된다. 대상 각섬석류의 성분변화를 변성작용의 압력형과 연관지어보면 핵부위의 양기석들은 중압형의 변성작용에 의해 성장한 것으로 볼 수 있고 주연부의 각섬석들은 저압형과 유사한 변성작용으로 인해 형성된 것임을 알 수 있다.