• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.740-743
• /
• 2001

Sandwich structure is widely used in various fields of industry due to its excellent strength and stiffness compared with weight. We studied the sandwich structure which has honeycomb core type. We are concerned about its buckling and bending stress with respect to its side length, thickness and the height ratio of its unit core. After obtaining the buckling critical load of unit core, we applied it to the sandwich structure to observe the bending behavior. When we compared the buckling with bending stress under buckling critical load, we observed that models of which length ratio of unit honeycomb core, A, is lower than 0.04 and the thickness of core, t, is thicker than 0.09 mm, is subjected to the ultimate stress by bending before buckling.

• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1015-1020
• /
• 1997

In the Nd;YAG crystal growth by Czochralski method, the relationship between the core formation and the solid-liquid interface was observed by controlling the temperature gradient in the furnace. When the crystal was grown along<111> direction, defects and core area were reduced as the temperature gradient increased. The optimum temperature gradient was found to be higher than 4$0^{\circ}C$/cm. The Nd3+ concentration analysis by ICP-Mass showed that the segregation coefficient was about 20% higher in the core region than core-free region, where the segregation coefficients of core region and core-free region were 0.22 and 0.18, respectively.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.146-150
• /
• 2005

In this paper, friction of air-jet textured yams is investigated. Using a friction measuring apparatus fabricated inhouse, dynamic friction forces of the yams under yarn-to-metal (YM) and yam-to-yam (YY) rubbing modes are measured. The influence of processing variables of air-jet texturing viz., overfeed, air pressure, dry/wet texturing and normal/core-and-effect texturing on dynamic friction is analysed. The results indicate that friction force increases with increasing rubbing speeds and yam input tension. YM dynamic friction decreases initially and then starts to increase at higher overfeeds. YY dynamic friction increases with increasing overfeed. YM dynamic friction decreases with an increase in air pressure while an opposite trend is observed for YY friction. Wet textured yams have higher friction than dry textured yams. Core wetted coreand-effect textured yams have higher friction than normal textured yams.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.2
• /
• pp.119-125
• /
• 2018

Objective: The purpose of this study was to compare the effect of different 12-week exercise programs for posture correction on postural alignment in elderly women. Method: The study included 36 elderly women who were randomly divided into 3 groups: Group A (core exercise, n=12), Group B (combined exercise, n=12), and Group C (Pilates exercise, n=12). Postural alignment was measured using 6 variables in frontal and sagittal planes. Two-way mixed analysis of variance was used to compare the effect of exercise program types on postural alignment and a paired t-test was used to compare differences in postural alignment after exercise. Results: The core exercise group showed statistically significant improvement (p<.05) in multiple upper and lower body postural alignment measurements. The combined exercise and Pilates exercise groups showed statistically significant improvement (p<.05) in upper body measurements alone. Conclusion: Core exercise, combined exercise, and Pilates exercise improved postural alignment in elderly woman through improvement in muscle strength and ligament flexibility around the spine and pelvis.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1263-1274
• /
• 2009

Several experimental tests to simulate a reflood phase of a cold-leg LBLOCA of the APR1400 have been performed using the ATLAS facility. This paper describes the related experimental results with respect to the thermal-hydraulic behavior in the core and the system-core interactions during the reflood phase of the cold-leg LBLOCA conditions. The present descriptions will be focused on the LB-CL-09, LB-CL-11, LB-CL-14, and LB-CL-15 tests performed using the ATLAS. The LB-CL-09 is an integral effect test with conservative boundary condition; the LB-CL-11 and -14 are integral effect tests with realistic boundary conditions, and the LB-CL-15 is a separated effect test. The objectives of these tests are to investigate the thermal-hydraulic behavior during an entire reflood phase and to provide reliable experimental data for validating the LBLOCA analysis methodology for the APR1400. The initial and boundary conditions were obtained by applying scaling ratios to the MARS simulation results for the LBLOCA scenario of the APR1400. The ECC water flow rate from the safety injection tanks and the decay heat were simulated from the start of the reflood phase. The simulated core power was controlled to be 1.2 times that of the ANS-73 decay heat curve for LB-CL-09 and 1.02 times that of the ANS-79 decay curve for LB-CL-11, -14, and -15. The simulated ECC water flow rate from the high pressure safety injection pump was 0.32 kg/s. The present experimental data showed that the cladding temperature behavior is closely related to the collapsed water level in the core and the downcomer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.103-111
• /
• 2015

To evaluate the compressive strength of concrete, rebound test and ultra pulse velocity methods as well as core test were widely used. The predicted strength effected by age, maturity and degradation of concrete, is a slight difference between in-situ concrete strength. The compressive strength of standard cylinder specimens and core samples by obtained from drilling will have a difference since the concrete is disturbed during the drilling by machinery. And the rebound number and ultra pulse velocity are also changed according to the age and maturity of concrete that effected to the surface hardness and microscpic minuteness. The authors performed the experimental work to reflect the age and core effect to the results from NDE test. The test results considering on the core and age of concrete were compaired with the proposed equation to predict the compressive strength.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.812-816
• /
• 2011

An optical lens is usually produced in the manner of high temperature compression molding with tungsten carbide alloy molding cores, it is necessary to develop and study technology for super-precision processing of molding cores and coating the core surface. As main methods used in surface improvement technologies using thin film, DLC present high hardness, chemical stability, and outstanding durability of abrasion to be extensively applied in various industrial fields. In this study, the effect of DLC coating of a thin film by means of the FVAS (filtered vacuum arc source) analyzed the characteristics of thin film. Surface roughness before and after DLC coating was measured and the result showed that the surface roughness was improved after coating as compared to before coating. In conclusion, it was observed that DLC coating of the ultra hard alloy core surface for molding had an effect on improving the surface roughness and shape of the core surface. It is considered that this will have an effect on improving abrasion resistance and the service life of the core surface.

• Steel and Composite Structures
• /
• v.43 no.2
• /
• pp.241-256
• /
• 2022

In this article, an analytical procedure is presented for static analysis of composite cylinders with the geometrically nonlinear behavior, and non-uniform thickness profiles under different loading conditions by considering moderately large deformation. The composite cylinder includes two inner and outer isotropic layers and one honeycomb core layer with adjustable Poisson's ratio. The Mirsky-Herman theory in conjunction with the von-Karman nonlinear theory is employed to extract the governing equations which are a system of nonlinear differential equations with variable coefficients. The governing equations are solved analytically using the matched asymptotic expansion (MAE) method of the perturbation technique and the effects of moderately large deformations are studied. The presented method obtains the results with fast convergence and high accuracy even in the regions near the boundaries. Highlights: • An analytical procedure based on the matched asymptotic expansion method is proposed for the static nonlinear analysis of composite cylindrical shells with a honeycomb core layer and non-uniform thickness. • The effect of moderately large deformation has been considered in the kinematic relations by assuming the nonlinear von Karman theory. • By conducting a parametric study, the effect of the honeycomb structure on the results is studied. • By adjusting the Poisson ratio, the effect of auxetic behavior on the nonlinear results is investigated.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.496-508
• /
• 2020

This study reviews studies on the core stabilization of respiratory muscle training for the elderly health. Previous research data and presenting basic literature data suggest that respiratory activation is an important mechanism for core strengthening via exercise interventions for the elderly. The review found that first, the mechanism of improving the respiratory muscles weakened by aging to address the loss of core function due to old age sarcopenia among the elderly results entails promoting the autonomic nervous system by focusing on the respiratory muscle activation pattern, the core muscle sensation mobilized for body centering. Second, nerve roots, intraperitoneal pressure, and deep muscles in the trunk of the body can be promoted while controlling respiratory stimulation with cognitive feedback. Effortful inspiration increases the activation of respiratory assistive muscles and effortless exhalation can improve the core muscle mobilization by involving abdominal muscles. Third, through respiratory muscle training, the elderly can increase their awareness of spinal centering and improve the ability to control the deep core muscles that must be mobilized for core stabilization. In conclusion, respiratory muscle training to increase the utilization of the trunk muscles seems to be a useful core stabilization exercise for the elderly with chronic tension and joint degeneration.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.95-102
• /
• 2023

The purpose of this study was to investigate the effect of 8 weeks of core training on dynamic posture control, lower extremity injury and proprioceptive joint position sensory in ski athletes. Twenty subjects participated in this study and were randomly divided into two groups : exercise group (Ex=10) and control group (Con=10). The core training program consisted of a bench, a sideways bench, a plank, a side bridge, and a supine bridge, and was conducted three times a week for 8 week. The dynamic posture control had a significant effect on the left and right postero-medial reach, and the lower extremity criterion test had a significant effect on the left and right composite scores. In addition, there was a significant decrease in the proprioceptive joint position sense at 15°of the left leg and 45°. In conclusion, 8 weeks a core training have been shown to improve skiers' dynamic posture control, lower extremity injury and proprioceptive joint position sensory.