• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.118-129
• /
• 2009

The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.

• Earthquakes and Structures
• /
• v.6 no.1
• /
• pp.89-110
• /
• 2014

Nonlinear dynamic analyses are carried out to investigate the influence of the pinching hysteretic response of the exterior RC beam-column joints on the seismic behavior of multistory RC frame structures. The effect of the pinching on the local and global mechanisms of an 8-storey bare frame and an 8-storey pilotis type frame structure is evaluated. Further, an experimental data bank extracted from literature is used to acquire experimental experience of the range of the real levels that have to be considered for the pinching effect on the hysteretic response of the joints. Thus, three different cases for the hysteretic response of the joints are considered: (a) joints with strength and stiffness degradation characteristics but without pinching effect, (b) joints with strength degradation, stiffness degradation and low pinching effect and (c) joints with strength degradation, stiffness degradation and high pinching effect. For the simulation of the beam-column joints a special-purpose rotational spring element that incorporates the examined hysteretic options developed by the authors and implemented in a well-known nonlinear dynamic analysis program is employed for the analysis of the structural systems. The results of this study indicate that the effect of pinching on the local and global responses of the examined cases is not really significant at early stages of the seismic loading and especially in the cases when strength degradation in the core of exterior joint has occurred. Nevertheless in the cases when strength degradation does not occur in the joints the pinching may increase the demands for ductility and become critical for the columns at the base floor of the frame structures. Finally, as it was expected the ability for energy absorption was reduced due to pinching effect.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.200-208
• /
• 2009

JBIG2, as the next generation standard for binary image compression, must be designed in hardware modules for the JBIG2 FAX to be implemented in an embedded equipment. This paper proposes a hardware module of the high-speed Huffman coder for JBIG2. The Huffman coder of JBIG2 uses selectively 15 Huffman tables. As the Huffman coder is designed to use minimal data and have an efficient memory usage, high speed processing is possible. The designed Huffman coder is ported to Virtex-4 FPGA and co-operating with a software modules on the embedded development board using Microblaze core. The designed IP was successfully verified using the simulation function test and hardware-software co-operating test. Experimental results shows the processing time is 10 times faster than that of software only on embedded system, because of hardware design using an efficient memory usage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1143-1150
• /
• 2000

A dual-mode multiplier (DMM) that performs single- and double-precision multiplications has been designed using a $0.25-\mum$ 5-metal CMOS technology. An algorithm for efficiently implementing double-precision multiplication with a single-precision multiplier was proposed, which is based on partitioning double-precision multiplication into four single-precision sub-multiplications and computing them with sequential accumulations. When compared with conventional double-precision multipliers, our approach reduces the hardware complexity by about one third resulting in small silicon area and low-power dissipation at the expense of increased latency and throughput cycles. The DMM consists of a $28-b\times28-b$ single-precision multiplier designed using radix-4 Booth receding and redundant binary (RB) arithmetic, an accumulator and a simple control logic for mode selection. It contains about 25,000 transistors on the area of about $0.77\times0.40-m^2$. The HSPICE simulation results show that the DMM core can safely operate with 200-MHZ clock at 2.5-V, and its estimated power dissipation is about 130-㎽ at double-precision mode.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.593-600
• /
• 2017

This paper analyzes the performances of direction finding, interference cancellation, and beamforming performance by array antenna pattern measurement distance between the center of array antenna and reference emitter. Array antenna is widely adopted for example as wireless communications, radar, and sonar. In order to use array antenna, array antenna pattern must be known and it can be measured in anechoic chamber. However, the size of anechoic chamber is generally limited. So measurement error of array antenna can be occurred and this could effect performance decrease of direction finding, interference cancellation, and beamforming. It is verified by computer simulation that the performances of direction finding, interference cancellation, and beamforming by array antenna pattern measurement distance.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.425-430
• /
• 2018

The battery system of an electric vehicle suffers from the problem the battery output and the service life decrease at low temperature. A Positive Temperature Coefficient(PTC) heater is used for maintaining room temperature but is heavy due to a complicated insulation structure. The larger the weight is, the lower the fuel economy of the electric vehicle is. On the other hand a induction heater have a simple insulation structure, which is effective in weight reduction and has a rapid temperature rise. The induction heater consists of an LC resonance circuit. The larger the capacitance is, the higher the price and weight is. Therefore, the inductance should be increased to reduce the capacitance. Also, the main heat source of the induction heater is coreloss. So, it is important to optimize inductance and coreloss in terms of electromagnetic field design. In this paper, the inductance and the coreloss according to the change of the induction heater structure were optimized through the Taguchi method and Finite Element Method(FEM) simulation.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.795-801
• /
• 2012

This paper describes theoretical approach methodology for the Probability based risk Evaluation Techniques (PET) to monitor the risk levels of small-sized sea floater as like a yacht pier. The risk decision-making process by risk criteria with five-step scales is the core concepts of PET. These five-step scales are calculated from cumulative probability distribution of response functions for the sea floater motions using closed-form expressions. In addition, The risk decision-making process of PET with the risk criteria is proposed in this work. To verify the usability of PET, simulation experiments are carried out using mimic signals with the electrical specifications of ADIS16405 sensor that is to be use as measurement tool for the floater motions. As results from experiments, the risk evaluation error by PET shows 0.38 levels in maximum 5.0 levels. These results clearly shown that the proposed PET can be use as the monitoring techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.814-821
• /
• 2005

When there are many tags using the same frequency around the reader in RFID system, they disturb each other and in the end their response cannot be received by the reader. To solve this disturbance and fast identify the tags, the anti-collision algorithm, which is the core technology in RFID system, is needed. We propose two ALOHA-type Dynamic Framed Slotted ALOHA(DFS-ALOHA) algorithms using Dynamic Slot Allocation(DSA), which dynamically allocates the frame size in accordance with the number of tags and Tag Estimation Method(TEM), which estimates the number of tags around the reader. We also compare the performance of the proposed DFS-ALOHA algorithms with that of the conventional Framed Slotted ALOHA (FS-ALOHA) algorithms and the algorithms proposed by Vogt using OPNET simulation. According to the analysis, the two proposed DFS-ALOHA algorithms(DFS-ALOHA I and DFS-ALOHA II) show better performance than the conventional ALOHA-based algorithms regardless of the number of tags. Although the two proposed DFS-ALOHA algorithms show the similar performance, BFS-ALOHA ll is better because it is easier to be implemented in the system and the complexity is lower.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.4
• /
• pp.277-285
• /
• 2004

We present a new hybrid stereo matching technique in terms of the co-operation of area-based stereo and feature-based stereo. The core of our technique is that feature matching is carried out by the reference of the disparity evaluated by area-based stereo. Since the reference of the disparity can significantly reduce the number of feature matching combinations, feature matching error can be drastically minimized. One requirement of the disparity to be referenced is that it should be reliable to be used in feature matching. To measure the reliability of the disparity, in this paper, we employ the self-consistency of the disunity Our suggested technique is applied to the detection of 3D line segments by 2D line matching using our hybrid stereo matching, which can be efficiently utilized in the generation of the rooftop model from urban imagery. We carry out the experiments on our hybrid stereo matching scheme. We generate synthetic images by photo-realistic simulation on Avenches data set of Ascona aerial images. Experimental results indicate that the extracted 3D line segments have an average error of 0.5m and verify our proposed scheme. In order to apply our method to the generation of 3D model in urban imagery, we carry out Preliminary experiments for rooftop generation. Since occlusions are occurred around the outlines of buildings, we experimentally suggested multi-image hybrid stereo system, based on the fusion of 3D line segments. In terms of the simple domain-specific 3D grouping scheme, we notice that an accurate 3D rooftop model can be generated. In this context, we expect that an extended 3D grouping scheme using our hybrid technique can be efficiently applied to the construction of 3D models with more general types of building rooftops.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.297-302
• /
• 2008

The positioning technology for a moving object is an important and essential component of ubiquitous computing environment and applications, for which Radio Frequency Identification(RFID) has been considered as a core technology. RFID-based positioning system calculates the position of moving object based on k-nearest neighbor(k-nn) algorithm using detected k-tags which have known coordinates and kcan be determined according to the detection range of RFID system. In this paper, RFID-based positioning system determines the position of moving object not using weight factor which depends on received signal strength but assuming that tags within the detection range always operate and have same weight value. Because the latter system is much more economical than the former one. The geometries of tags were determined with considerations in huge buildings like office buildings, shopping malls and warehouses, so they were determined as the line in I-Dimensional space, the square in 2-Dimensional space. In 1-Dimensional space, the optimal detection range is determined as 125% of the tag spacing distance through the analytical and numerical approach. Here, the analytical approach means a mathematical proof and the numerical approach means a simulation using matlab. But the analytical approach is very difficult in 2-Dimensional space, so through the numerical approach, the optimal detection range is determined as 134% of the tag spacing distance in 2-Dimensional space. This result can be used as a fundamental study for designing RFID-based positioning system.