• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.788-792
• /
• 2010

The yttrium-barium-copper-oxide (YBCO) coated conductor, which supplement the fault of the existing superconducting current-limit materials YBCO thin film, bismuth-strontium-calcium-copper-oxide(BSCCO) wire and bulk, has been improved its mechanical weakness and has high index; hence, after quench YBCO coated conductor could limit the fault current effectively because of fast resistance occurrence speed. Furthermore, it has wide applicable area as an current limit material because it shows different resistance occurrence tendency by the thickness and kind of stabilization material sputtered on the superconducting layer. Therefore, many researchers are carrying out the study of application of YBCO coated conductor to superconducting fault current limiter (SFCL) for making high quality current limit element, based on resistance type. On the other hand, the study for other type except resistance type has been rarely conducted for the application of YBCO coated conductor to SFCL as an current limit element. Consequently, in this study, YBCO coated conductor with different stabilization layer Cu and Stainless steel, is applied to SFCL using iron core and coil, and examine the many index points as an current limit element, such as current limit characteristic, the tendency of resistance occurrence, response time, the temperature trend for stability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.37-40
• /
• 2008

Recently, Construction Business, is changing very quickly, exceedingly needs to slim down the construction expensive by reducing material costs and the term of works. The term of formwork takes 25% of the term of works and costs 15% to 20% of the cost of construction. Hereupon, the purpose of this study is to investigate the Axial Strength of Centrifugall Formed Shell PC Columns that can reduce the term of formwork, the costs of material, the difficulty of throwing away the waste. Shell PC Column is loaded stirrups and manufactured at factory, so it has good points like construction's quality control and part's precision. However, it needs to be tested for checking bonded ability because it is set up at core and coverd with concrete. therefore this study is necessary three type of columns, which are a RC column, different type of two compressive strength core concrete columns and a Shell PC Column. By three columns, this study compare with and analysis three columns's bonded and Compressive Behavior abilities.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.21-27
• /
• 2014

In this study, the prediction methods for the crest settlement after impounding and the maximum internal settlement during dam construction were proposed through the analysis on settlement data at 46 monitored points of 37 Center-Cored Rockfill Dams (CCRDs). Results from this analysis provided that the crest settlement increases with elapsed time, and from the relationship between the dam height and the maximum internal settlement during dam construction, it is confirmed that the internal settlement was largely evaluated when the coarse-grained material was used as the dam core. This internal settlement increased in proportion to the dam height. In addition, the crest settlement of the CCRD with the core compacted with fine-grained material was relatively large. It is expected that the results of this study would provide the practical tool for the design, construction and management of CCRDs.

• Nuclear Engineering and Technology
• /
• v.47 no.2
• /
• pp.204-211
• /
• 2015

Probabilistic safety assessment (PSA) has had a significant role in quantitative decision-making by finding design and operational vulnerabilities and evaluating cost-benefit in improving such weak points. In particular, it has been widely used as the core methodology for risk-informed applications (RIAs). Even though the nature of PSA seeks realistic results, there are still "conservative" aspects. One of the sources for the conservatism is the assumptions of safety analysis and the estimation of failure frequency. Surveillance, diagnosis, and prognosis (SDP), utilizing massive databases and information technology, is worth highlighting in terms of its capability for alleviating the conservatism in conventional PSA. This article provides enabling techniques to solidify a method to provide time- and condition-dependent risks by integrating a conventional PSA model with condition monitoring and prognostics techniques. We will discuss how to integrate the results with frequency of initiating events (IEs) and probability of basic events (BEs). Two illustrative examples will be introduced: (1) how the failure probability of a passive system can be evaluated under different plant conditions and (2) how the IE frequency for a steam generator tube rupture (SGTR) can be updated in terms of operating time. We expect that the proposed model can take a role of annunciator to show the variation of core damage frequency (CDF) depending on operational conditions.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.13-18
• /
• 2000

Low temperature co-fired ceramics on metal (LTCC-M) is efficient for embedding passive components with good tolerance in a module due to the dimensional stability in x and y directions by the constraint of metal core during the firing. In addition, the radiation noise can be reduced by metal core. In this paper, embedded passive components were introduced and a power amplifier module (PAM) fabricated by using the passive components was explained. The embedded passive components in test patters showed the tolerance of 10~20% and the good repeatability in tolerance of embedded passives was maintained in module fabrication. The shortened traces in multi chip modules (MCMs) make the signal delay time decreased and the embedded passives simplify the packaging processes owing to the less solder points, which enhance the electrical performance and increase the reliability of the modules. The LTCC-M technology is one of the promising candidates for RF application and is expected to expand its applications to power and high performance devices.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.137-144
• /
• 1998

High-temperature superconducting joints between 61 filaments of Bi-2223 tapes were fabricated by chem-ical corrosion and repeated thermomechanical process. The silver sheath of the superconducting tape was chemically removed using chemical etchant(NH4OH:H2O2=1:1) from one side of each tape without altering the form of lap joint. The joined region was formed by uniaxial pressing and a series of thermomechanical process and then subjected to properties measurement and microstructural analysis. The critical current(Ic) variation and I-V characteristics along the joint were mesured with several configuration of proble points. Ic value of the transition region of the joint inthe multifilament tape which limit the total current carring capacity of the superconducting tape was higher than that of monofilament tape. But the transition ex-ponent n-value of the multi-filament tape was lower than that of monofilament wire due to the interaction of the individual superconducting core of the multi-filament. The critical current through the joint area was improved by respeated press and reaction annealing treatment.

• Korean Journal of Biological Psychiatry
• /
• v.18 no.4
• /
• pp.210-216
• /
• 2011

Subsyndromal depression (SSD) is found to be more prevalent than major depressive disorder (MDD) and minor depressive disorder (MnDD). SSD is also associated with adverse clinical outcomes, increased risk of suicide, increased social dysfunction and disability, increased risk for future mood disorders, and increased uses of medical and mental health services. DSM-IV diagnostic criteria are not suitable for capturing SSD. Although there is no agreement on gold standard to define SSD so far, three definitions of SSD are available. First, SSD is defined as having two or more current depressive symptoms without core depressive symptoms (depressive mood or loss of interest) and with time threshold (most of the day and nearly every day over at least two weeks). Second, SSD is defined as having two or more current depressive symptoms with core depressive symptoms and without time threshold. Third, SSD is defined by using cutoff points of depression rating scales. SSD may represent a prodromal, residual, or interepisode symptomatic state in the course of MDD and MnDD. More than a half of SSD patients became any type of depressive disorders (SSD, MnDD and MDD) at 1 year. SSD may represent a discrete category of its own, without prior or consequent episodes of MDD. Considering clinical significance of SSD such as its high prevalence, significant psychosocial impairment and chronicity and serious outcomes, researchers and clinicians should be more vigilant in capturing and caring for patients with SSD.

• Journal of the Korean Society of Costume
• /
• v.58 no.6
• /
• pp.110-123
• /
• 2008

The objectives of this study are to define the fundamental notions of collaboration in design field. The results of this study are summarized as follows: Firstly, collaboration means a cooperative work which are cooperatively done by collabarator and collaboratee on the equal status within a certain period of time, based on core ability of each of them. This cooperative work is presented with a visual image based on the identity of participants, and it creates an added value. Collaboration is different from convergence and hybrid in the methodological aspects and from brand alliance and strategic alliance in the aspects of the subject of project. Secondly, collaboration has been developing through step of using the specific ability, step of sharing each core abilities, and step of fusing their identities, in a view of the sphere of cooperative work and the intimate relations in reciprocity. Thirdly, according to strategic purpose, collaboration can be classified into value ascending collaboration, image changing collaboration, business-field extension collaboration, and event collaboration. Fourthly, production methods of collaboration consist of limited edition method, premium line method, common line method, producing a collaborative product, and so on. Fifthly, differentiation effect, image upgrade effect, production of higher value-added products, sale increase, diversification of business, sharing the targets, and promotion effect are achievable through collaboration. Sixthly, to make progress in collaboration successfully, the compatibility of combination between collaborator and collaboratee, the superiority of collaboratee, definitude of collaboration, the fit method of collaboration, the novelty of collatoration, possibility of issuing of collaboration, and perfection of collabo-product must be the points which deserve our attention.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.255-259
• /
• 2022

The new social reality emerging amid the global rise of communication links and integration processes acutely emphasizes the problems of communication in large and small social systems. The method of their communication becomes one of the keys to ensuring global security. It has become the mission of humanitarian education to prepare the younger generations for life in a changing world with no image of the future and increasing uncertainty. In psychological and pedagogical research, there is a growing scientific interest in the problems of interaction of the individual with the social environment. The mental trace of a person's practice in society shapes the experience of social interaction, which constitutes simultaneously the source, tool, and condition for the emergence and development of personality. The study outlines the methodological foundations for the study of individual experiences of social interaction. A hypothesis about the productivity of the functional matrix method is tested. Materials for the training of specialists in the humanities include interdisciplinary approaches to the study and transformation of the experience of social interaction and systematic methodology for the study of complex objects. Fundamental to the study is the systematic-dialectical method, and the matrix method is employed as the instrumental-technological method. The paper presents the results of a multidisciplinary overview of scientific literature concerning the essential characteristics and functions of social interaction and the respective experience. The overview points to the fragmented nature of scientific understanding of the elements of experience outside its integrity and systemic properties. Based on the formula "personality interacts with the social environment", the study presents an algorithm for the application of a systematic methodology for the study of complex objects, which made it possible to identify the system parameters of experience at three levels of cognition and develop the reference structural and functional matrices for the didactic system of its pedagogical enrichment.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.4
• /
• pp.277-286
• /
• 2023

Objectives: In this study, we aimed to develop a systematic tool that can evaluate the effects of interprofessional education (IPE) by applying four core competencies (values/ethics for interprofessional practice, roles/responsibilities, interprofessional communication, and teams and teamwork) and an educational evaluation model to evaluate the learning, behavior of learners, and results step by step. Methods: Previous studies on IPE evaluation tools were analyzed, and an evaluation tool (draft) was developed by modifying questions suitable for evaluation according to the Kirkpatrick model's stages and core competencies. The evaluation tool was completed by conducting a Delphi survey twice with 4-6 experts. To analyze the Delphi survey, the content validity index (CVI) was calculated, and the reliability coefficient (Cronbach's alpha coefficient) was used to measure reliability. Results: 29 questions on pre-education, consisting of learning and behavior stages, and 54 questions on post-education, consisting of reaction, learning, behavior, and results stages, were developed. The CVI and Cronbach's alpha coefficient values were >0.8 and >0.6, respectively. Conclusions: The IPE evaluation tool developed in this study is expected to contribute to the evaluation of the educational level of IPE and the identification of points for improvement when applied to various educational settings.