• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.254-260
• /
• 2005

By incorporating large core polymer waveguides, which have been developed for increased alignment tolerance in passive fiber attachment, highly efficient variable optical attenuators are proposed. In order to find optimum device structures, 3-dimensional beam propagation method (BPM) simulations are performed. Heat distribution over the polymer film is calculated to find the 3-dimensional index profile data for the BPM simulation. Due to the small index contrast between the core and cladding materials in the large core waveguide, heat-induced radiation occurs for small heating power. While the ordinary VOA needs the temperature to change over $150^{\circ}C$ for 20 dB attenuation, the large core VOA requires only $70^{\circ}C$. In addition to the merit of passive fiber attachment, the proposed VOA has enhanced attenuation efficiency for the lower temperature change.

• Structural Engineering and Mechanics
• /
• v.75 no.6
• /
• pp.643-657
• /
• 2020

This study presents experimental and numerical investigations on circular steel tube confined ultra high performance concrete (UHPC) columns under axial compression. The plain UHPC without fibers was designed to achieve a compressive strength ranged between 150 MPa and 200 MPa. Test results revealed that loading on only the UHPC core can generate a significant confinement effect for the UHPC core, thus leading to an increase in both strength and ductility of columns, and restricting the inherent brittleness of unconfined UHPC. All tested columns failed by shear plane failure of the UHPC core, this causes a softening stage in the axial load versus axial strain curves. In addition, an increase in the steel tube thickness or the confinement index was found to increase the strength and ductility enhancement and to reduce the magnitude of the loss of load capacity. Besides, steel tube with higher yield strength can improve the post-peak behavior. Based on the test results, the load contribution of the steel tube and the concrete core to the total load was examined. It was found that no significant confinement effect can be developed before the peak load, while the ductility of post-peak stage is mainly affected by the degree of the confinement effect. A finite element model (FEM) was also constructed in ABAQUS software to validate the test results. The effect of bond strength between the steel tube and the UHPC core was also investigated through the change of friction coefficient in FEM. Furthermore, the mechanism of circular steel tube confined UHPC columns was examined using the established FEM. Based on the results of FEM, the confining pressures along the height of each modeled column were shown. Furthermore, the interaction between the steel tube and the UHPC core was displayed through the slip length and shear stresses between two surfaces of two materials.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.505-513
• /
• 2001

지문영상의 분류는 데이터베이스의 용량이 클 경우 검색시간을 효율적으로 단축시킬 수 있는 핵심적인 기술이다. 따라서 본 논문에서 core point 와 flow-line 추적을 이용한 효율적인 지문 영상 분류 기법을 제안한다. 제안한 방법은 특히 압착 날인된 지문 영상의 분류에 적합한 방법으로 크게 2단계로 이루어져 있다. 첫 번째 단계에서는 먼저 Poincare index를 이용하여 core point를 찾아내고 이를 바탕으로 개략적인 분류를 수행한다. 그 다음 두 번째 단계에서는 core point를 중심으로 flow-line을 추적하여 그 결과를 가지고 세부적인 분류를 수행한다. 세부분류 단계에서는 평활화된 블록의 방향정보를 이용한 효과적인 flow-line 추적 알고리즘과 이를 이용한 새로운 분류 방법이 제안된다. 제안한 방법은 회전이나 이동 그리고 약간의 잡음에 강인한 지문 분류 방법으로 지문입력기를 통하여 획득된 700장의 지문 영상에 적용해 본 결과 93.6%의 분류율을 나타내었다.

• Smart Structures and Systems
• /
• v.26 no.2
• /
• pp.185-193
• /
• 2020

Nonlinear vibration of sandwich plate with functionally graded material (FGM) core and carbon nano tubes reinforced (CNTs) nano-composite layers by considering temperature-dependent material properties are studied in this paper. Base on Classical plate theory (CPT), the governing partial differential equations of motion for sandwich plate are derived using Hamilton principle. The Galerkin procedure and multiple scales perturbation method are used to find relation between nonlinear frequency and amplitude of vibration response. The dynamic responses of the sandwich plate are also investigated in both time and frequency domains. Then, the effects of nonlinearity, excitation, power law index of FG core, volume fraction of carbon nanotube, the function of material variations of FG core, temperature changes, scale transformation parameter and damping factor on the frequency responses are investigated.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.226-232
• /
• 2018

We propose a triangular-multicore hollow optical fiber (TMC-HOF) design for uncoupled mode-division and space-division multiplexing. The TMC-HOF has three triangular cores, and each core has three modes: $LP_{01}$ and two split $LP_{11}$ modes. The asymmetric structure of the triangular core can split the $LP_{11}$ modes. Using the proposed structures, nine independent modes can propagate in a fiber. We use a fully vectorial finite-element method to estimate effective index, chromatic dispersion, differential group delay (DGD), and confinement loss by controlling the parameters of the TMC-HOF structure. We confirm that the proposed TMC-HOF shows flattened chromatic dispersion, low DGD, low confinement loss, low core-to-core crosstalk, and low crosstalk between adjacent modes. The proposed TMC-HOF can provide a common platform for MDM and SDM applications.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.135-142
• /
• 2012

We have developed a measurement method of the refractive index profile of an optical fiber by using diffraction phase microscopy. In the microscope system, the reference light was extracted directly from the probe light that passed through the sample by means of pinhole filtering with a diffraction grating. The spatial interference pattern produced by the probe light and the reference light was processed to generate the phase image of the sample fiber. The index profile was obtained by the inverse Abel transform of the phase profile. In order to remove the background phase that originated from the index difference between the cladding and the surrounding medium, the background phase was calculated from the phase data of the cladding to make a core phase profile that can be directly transformed to the index profile of the core without the full phase image that includes the entire cladding part.

• Journal of Navigation and Port Research
• /
• v.32 no.9
• /
• pp.723-727
• /
• 2008

Sensing performances of evanescent field absorption (EFA) hetero-core fiber sensor has been presented based on EFA by changing the length and the core diameter of the single mode fiber. Experimental results have demonstrated a good feature in their relationship between the length and the core diameter of the single mode fiber. The sensor consists of 2 fiber optics which have the same cladding diameter of $125{\mu}m$ However one fiber optic used is single mode and has varying core diameter ranging from 3.3 to $5.6{\mu}m$. The other fiber is multimode type and has a thicker fixed core diameter of $62.5{\mu}m$. The 2 fiber optics are thermally spliced together. Experiments conducted to measure the resonance wavelength were carried out over a range of refractive index, to find the optimum sensing length Experiments show that core diameter of the single mode fiber and sensing length offects the linearity and sensitivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.34-47
• /
• 2018

As interest in advanced countries regarding the convergence technology development increases, a methodology for identifying the core convergence technology that has a large spill-over effect on the technology and industry is required for the nation's competitiveness enhancement in the convergence technology field. Based on patent citation network analysis using 1,124 USPTO patents in the ICT convergence technology field of the smart factory, this study examined the proposed heterogeneous technology convergence index as a tool for measuring the convergence characteristics of the spillovers compared to other indexes (i.e. other sector ratio index and homogeneous technology convergence index). The proposed heterogeneous technology convergence index was used to investigate core technology sectors among ICT technology sectors of smart factory identified by government ministries. Results found 6 core ICT convergence technology sectors including the manufacturing execution analysis application sector. Also, this study conducted blockmodeling analysis using the IPC codes of patents in the manufacturing execution analysis application sector, and identified that the blocks representing the electronic communication and electric digital data processing technology sectors (Block 3 & 4) are related technology sectors which can be converged with core technology. Based on the findings, the implications for the convergence technology development planning of the smart factory field are discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1349-1357
• /
• 2019

The purpose of this study was to investigate to effect of core exercise with swiss ball on sarcopenia index in agriculture older women. A total of 30 subjects(15 Ex group, 15 Con group, 65 over agriculture older woman) were participated in this study. Intervention group were assigned to performing a progressive core exercise training program for 12 weeks(2 time/week). Dependent variable were grip strength, chair stand, muscle mass, 4m gait speed, Timed up and go, and 400m walking. As a result were following. Grip strength was not significantly difference but chair stand was significantly difference in time. And muscle mass was significantly difference in groups. And 4m gait speed, Timed up and go and 400m walking were significantly difference in time. In conclusion, lower body muscle strength and short physical performance battery by muscle activating with core muscle strength training.