• 대한임베디드공학회논문지
• /
• 제9권3호
• /
• pp.145-150
• /
• 2014

This paper presents an effective vision based method for LED traffic light detection at the daytime. First, the proposed method calculates horizontal coordinates to set region of interest (ROI) on input sequence images. Second, the proposed uses color segmentation method to extract region of green and red traffic light. Next, to classify traffic light and another noise, shape filter and haar-like feature value are used. Finally, temporal delay filter with weight is applied to remove blinking effect of LED traffic light, and state and weight of traffic light detection are used to classify types of traffic light. For simulations, the proposed method is implemented through Intel Core CPU with 2.80 GHz and 4 GB RAM, and tested on the urban and rural road video. Average detection rate of traffic light is 94.50 % and average recognition rate of traffic type is 90.24 %. Average computing time of the proposed method is 11 ms.

• 천문학회보
• /
• 제41권1호
• /
• pp.77.4-78
• /
• 2016

Binary interactions may have significant impact on Pop III stellar evolution. Pop III single star evolution indicates that for primary masses less than $20M_{\odot}$, no significant binary mass transfer would occur before core helium exhaustion. We perform binary system evolution for various primary masses ($20M_{\odot}$ < $M_1$ < $60M_{\odot}$) and initial periods under same mass ratio $M_2/M_1=0.9$, and follow the evolution and mass transfer of the primary star. If binary mass transfer occurs during post main sequence, the primary star does not evolve into naked helium star and still contain significant hydrogen in the envelope. During the post mass transfer phase, the primary star evolves redward, and does not become sufficiently hot to enhance the number of ionizing photons, compared to the case of single star evolution for a given initial mass. This result implies that primary stars of massive Pop III binary systems would have little contribution to the reionization in the early universe. Given the large hydrogen content ($0.326-1.793M_{\odot}$), the primary stars that underwent stable mass transfers would explode as a Type IIb supernova, and it would be difficult for Pop III binary stars to produce Type Ib/c supernovae that look similar to those found in the local universe.

• 천문학회보
• /
• 제39권1호
• /
• pp.83.1-83.1
• /
• 2014

Open clusters consisting of a co-spatial and coeval population with a similar chemical composition are a superb astrophysical test bed in both stellar and galactic astronomy. We introduce not only several scientific issues relating to these objects but also comprehensive studies of the two young open clusters Westerlund 1 and IC 1848 formed in extremely different star-forming conditions. Westerlund 1 is known as the most massive starburst cluster in the Galaxy. Located in the Scutum-Centaurus spiral arm, the cluster is relatively close to the Galactic Center. The apparent surface density is very high. On the other hand, IC 1848 is a core cluster within the large-scale star-forming region W5 lying in the Perseus arm. Unlike Westerlund 1, IC 1848 with a putatively low metallicity exhibits a low surface density. We present the fundamental parameters of those young clusters, such as reddening, distance, and age, obtained from the broadband photometric analysis. The stellar initial mass function (IMF) of the clusters is used to investigate the effects of the different star-forming conditions on the star formation activity. With the results of previous studies for several young open clusters, our preliminary results support a possibility that star formation activity may be affected by the environmental factors or the initial condition of natal clouds. In addition, we shortly discuss the age scale and spread of pre-main sequence stars to understand the formation processes of star clusters.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2877-2883
• /
• 2010

The folding kinetics of $WT^*$ ubiquitin variant with valine to alanine mutation at sequence position 26 (HubWA) was studied by stopped-flow fluorescence spectroscopy. While unfolding kinetics showed a single exponential phase, refolding reaction showed three exponential phases. The semi-logarithmic plot of urea concentration vs. rate constant for the first phase showed v-shape pattern while the second phase showed v-shape with roll-over effect at low urea concentration. The rate constant and the amplitude of the third phase were constant throughout the urea concentrations, suggesting that this phase represents parallel process due to the configurational isomerization. Interestingly, the first and second phases appeared to be coupled since the amplitude of the second phase increased at the expense of the amplitude of the first phase in increasing urea concentrations. This observation together with the roll-over effect in the second folding phase indicates the presence of intermediate state during the folding reaction of HubWA. Quantitative analysis of Hub-WA folding kinetics indicated that this intermediate state is on the folding pathway. Folding kinetics measurement of a mutant HubWA with hydrophobic core residue mutation, Val to Ala at residue position 17, suggested that the intermediate state has significant amount of native interactions, supporting the interpretation that the intermediate is on the folding pathway. It is considered that HubWA is a useful model protein to study the contribution of residues to protein folding process using folding kinetics measurements in conjunction with protein engineering.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.207-210
• /
• 2007

To identify structural or functional common subunit(s) in the CP1 (editing) domains of class Ia tRNA synthetases, five available structures were compared and analyzed. Through the sequence alignments and structural overlapping of the CP1 domains, three conserved regions were identified near the amino acid binding site in the editing domain. Structural overlapping of the three subunits clearly showed the existence of three common structural subunits in all of the five editing RS structures. Based on the established experimental results and our modeling results, it is proposed that subunits 1 and 3 accommodate the incoming amino acid binding, while subunit 2 contributes to the interactions with the adenosine ring of the A76 to stabilize the overall tRNA binding. Since these subunits are critical for the editing reaction, we expect that these key structures should be conserved through the most class Ia editing RSs.

• ETRI Journal
• /
• 제30권4호
• /
• pp.576-586
• /
• 2008

In most parallel loops of embedded applications, every iteration executes the exact same sequence of instructions while manipulating different data. This fact motivates a new compiler-hardware orchestrated execution framework in which all parallel threads share one fetch unit and one decode unit but have their own execution, memory, and write-back units. This resource sharing enables parallel threads to execute in lockstep with minimal hardware extension and compiler support. Our proposed architecture, called multithreaded lockstep execution processor (MLEP), is a compromise between the single-instruction multiple-data (SIMD) and symmetric multithreading/chip multiprocessor (SMT/CMP) solutions. The proposed approach is more favorable than a typical SIMD execution in terms of degree of parallelism, range of applicability, and code generation, and can save more power and chip area than the SMT/CMP approach without significant performance degradation. For the architecture verification, we extend a commercial 32-bit embedded core AE32000C and synthesize it on Xilinx FPGA. Compared to the original architecture, our approach is 13.5% faster with a 2-way MLEP and 33.7% faster with a 4-way MLEP in EEMBC benchmarks which are automatically parallelized by the Intel compiler.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.686-691
• /
• 2010

Flash boiling takes place when the thermodynamic state of the liquid deviates from its saturation limit over which the liquid temperature exceeds by a certain degree of superheat. The liquid jet introduced into the lower pressure zone than the liquid saturation pressure experiences a sequence of the atomization and disintegrated into numerous faster and smaller droplets. In the present study spray characteristics for a flash swirl spray were experimentally investigated. Injectant temperature is raised by a high frequency dielectric heating method and local spray characteristics are instantly measured by Global Sizing Velocimetry (GSV, TSI Inc.). Dependence of dimensionless superheat degree and injection pressure on total and local SMDs and mean droplet size is quantitatively examined. The flash swirl spray has the relation in the injection pressure and nozzle diameter in order to determine the spray quality, including the dimensionless superheat degree. Small droplets occur in the void core and local droplet size distributions largely depend on the dimensionless superheat degree and the injection pressure.

• 한국해양공학회지
• /
• 제18권4호
• /
• pp.65-70
• /
• 2004

Many port states, such as New Zealand, U.S.A., Australia, and Canada, have strict regulations to prevent arriving ships from discharging polluted ballast water that contains harmful aquatic organisms and pathogens. They are notified that transfer of polluted ballast water can cause serious injury to public health and damage to property and environment. For this reason, ballast exchange in deep sea is perceived as the most effective method of emptying ballast water. The ballast management plan contains the effective exchange method, ballast system, and safety considerations. In this study, we pursued both nautical engineering analysis and optimization of the algorithm, in order to generate the sequence of stability and rapidity. A heuristic algorithm was chosen on the basis of optimality and applicability to a sequential exchange problem. We have built an optimized algorithm for the automatic exchange of ballast water, by redefining core elements of the A$\ast$ algorithm, such as node, operator, and evaluation function. The final version of the optimized algorithm has been applied to existing bulk carrier, and the performance of the algorithm has been successfully verified.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.484-489
• /
• 1999

This paper deals with the design and fabrication of a heater-trigger type high-Tc superconducting power supply system, and characteristics have been analyzed through experiments. The high-Tc superconducting power supply consists of two heater trigger and electric magnet, and YBCO superconducting bulk. In this experiment, 0.6T class magnet and dc 2.3A heater current are used, and the current-pumping characteristics have been analyzed with computer aided sequence control system. Hall sensors are installed on the YBCO bulk and in the center of iron core in order to analyze the effect of the flux-pumping on the system with when magnet flux changes its value. In this experiment, maximum pumping-current has been achieved to about 6.6 amps.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.895-903
• /
• 2012

This paper presents a fast switching direct torque control (FS-DTC) using only a single DC-link current sensor. In FS-DTC, six new active voltage complex space vectors (CSVs) are synthesized by the conventional active voltage space vectors (SVs). The corresponding sectors are rotated in the anticlockwise direction by 30 degrees. A selection table is defined to select the CSVs. Based on the "Different Phase Mode", the output sequence of the selected CSV is optimized. Accordingly, a reconstruction method is proposed to acquire the phase currents. The core of the FS-DTC is that all of the three phase currents can be reliably reconstructed during every two sampling periods, which is the result of the fast switching between different phases. The errors between the reconstructed and actual currents are strictly limited in one sampling period. The FS-DTC has the advantages of the standard DTC scheme such as simple structure, quick torque response and robustness. As can be seen in the analysis, the FS-DTC can be thought of as an equivalent standard DTC scheme with 86.6% of the maximum speed, 173.2% of the torque ripple, and 115% of the response time of the torque. Based on a dSPACE DS1103 controller, the FS-DTC is implemented in an induction machine drive system. The results verify the effectiveness of the FS-DTC.