• 제목/요약/키워드: Copper-64

검색결과 132건 처리시간 0.031초

기후요소에 의한 증발량 연구 (On Lake Evaporation from Climatological Data in Korea)

  • 조희구
    • 물과 미래
    • /
    • 제6권1호
    • /
    • pp.5-12
    • /
    • 1973
  • A simple regression formula for estimating the lake evaporation rate from the copper-plated pan (diameter 20cm, height 10cm) is derived. A comparison with other formulae indicates that the formula is more accurate than others. An annual map of man evaporation in Korean peninsula has been prepared using the relation. It demonstrates the areal average distribution of mean annual evaporation from a free water surface with no heat storage effect and avected energy owing to differences in the temperature of in-and outflow. The mean annual ratio of the lake to the copper-plated pan evaporation is found to be 0.64. The ratio varies with local conditions from 0.62 to 0.66, and hence it can be considered fairly uniform. However the seasonal variation of the ratio appears to be rather significant. It changes from the lowest of 0.61 to the highest of 0.75.

  • PDF

Experimental Works and Power Loss Calculations of Surface-Mounted Permanent Magnet Machines

  • Choi, Jang-Young;Ko, Kyoung-Jin;Jang, Seok-Myeong
    • Journal of Magnetics
    • /
    • 제16권1호
    • /
    • pp.64-70
    • /
    • 2011
  • Surface-mounted permanent magnet (PM) machines were examined experimentally and theoretically, through power loss measurements and calculations. Windage, friction and copper losses were calculated using simple analytical equations and finite element (FE) analyses. Stator core losses were calculated by determining core loss coefficients through curve-fitting and magnetic behavior analysis through non-linear FE calculations. Rotor eddy current losses were calculated using FE analyses that considered the time harmonics of phase current according to load. Core, windage and friction open-circuit losses and copper loss were determined experimentally to test the validity of the analyses.

에스트로젠 수용체 리간드로서 사이클렌을 기본 구조로 한 구리 착물의 합성 (Synthesis of Cyclen-Based Copper Complexes as a Potential Estrogen Receptor Ligand)

  • 박정찬;달판판댜;전학림;이상우;안병철;이재태;유정수
    • Nuclear Medicine and Molecular Imaging
    • /
    • 제41권4호
    • /
    • pp.326-334
    • /
    • 2007
  • 에스트로젠 수용체 양성 유방암에서 과발현되는 에스트로젠 수용체는 $[^{18}F]FES$와 같은 $^{18}F$이 표지된 스테로이드계 에스트로젠 수용체 리간드를 사용하여 양전자방출단층촬영기로 영상을 얻을 수 있다. 반감기가 12.7시간인 $^{64}Cu$에 비해 1.8시간인 $^{18}F$은 반감기가 짧고, $^{64}Cu$로 표지 하는 경우보다 수율이 낮은 단점이 있다. 사이클렌은 구리, 인듐, 갈륨, 가돌리륨 등과 같은 금속과 안정한 착물을 형성한다. 이를 근거로 2개의 페놀 하이드록시 그룹을 가지고 있는 사이클렌을 기본구조로 한 구리 착물을 합성하였다. 재료 및 방법 : 1,7 위치에 보호기를 가지고 있는 1,7-bis(benzyloxy-carbonyl)-cyclen은 기존에 알려진 방법에 따라 합성 되어졌다. 여기에 4,10 위치에 2개의 4-benzyloxybenzyl groups을 도입한 후, Pd/C상에서의 수소화 반응으로 benzyloxycarbonyl과 benzyl groups이 모두 제거됨으로써 1,7-bis(4-hydroxybenzyl)-cyclen (1)을 성공적으로 합성할 수 있었다. 결과: 우리가 합성한 물질 1은 $^1H,\;^{13}C-NMR$ 그리고 질량분석기로 만들어졌는지 여부를 확인하였다. 이 물질들은 구리 이온과 반응하여 $[Cu(1)]^{2+}2(ClO_4)^-$$[Cu(1)Cl]^+Cl^-$를 형성하였고, 고분해능 FAB 질량분석기로 확인하였다. 결론: 우리는 질소원자에 trans 방향으로 2개의 페놀 그룹을 가지고 있는 cyclen 유도체를 합성하는데 성공하였고, 구리이온과 반응하여 각각 전체 전하가 +2그리고 +1인 구리 착물을 합성하였으며, 이들은 에스트로젠 수용체의 영상화를 위한 PET 추적자로 쓰일 수 있는 가능성이 있다.

Research status for long term half-life PET radioisotopes in KIRAMS

  • Kim, Jung Young;Park, Hyun;Chun, Kwon Soo;An, Gwang Il
    • 대한방사성의약품학회지
    • /
    • 제1권1호
    • /
    • pp.1-8
    • /
    • 2015
  • It is essential use of long term half life radioisotopes for positron emission tomography (PET) imaging study of biopharmaceuticals because most of biopharmaceuticals have long biological half-life. Some representative isotopes are $^{124}I$, $^{64}Cu$, $^{89}Zr$ and so on. These PET radioisotopes and their radiopharmaceuticals have recently received growing interest because of long half life and good imaging properties. Furthermore, $^{64}Cu$ and $^{89}Zr$ can be used in a number of radiopharmaceuticals due to its ease of conjugation to peptides and antibodies using the proper chelator. In recent years, since $^{124}I$ was first developed in 2005, we have been studied to develop an efficient method and procedure for producing these radioisotopes, and we have made considerable progress in production of long term half life radioisotopes. This review introduces the general production system, purification procedure, and several advances on targeting method for $^{124}I$ and $^{64}Cu$ in KIRAMS.

아말감의 표면연마에 관한 전기화학적 연구 (AN ELECTROCHEMICAL STUDY ON SURFACE FINISH OF DENTAL AMALGAM)

  • 석창인;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제16권2호
    • /
    • pp.18-32
    • /
    • 1991
  • The purpose of this study was to observe characteristic properties of amalgam through the polarization curves and SEM images from 4 type amalgams (Amalcap, Shofu spherical. Dispersalloy and Tytin) with 3 different surface finish procedures (polishing, burnishing and carving) by using the potentiostats (EG & GPARC) and SEM (Jeol JSM-35). After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of mechanical amalgamator (Samki), the triturated mass was inserted into the cylndrical metal mold which was 12 mm in diameter and 10 mm in height and was pressed with $100kg/cm^2$. 4 specimens of each type amalgam were burnished with egg burnisher and another 4 specimens of each type amalgam were carved with Hollenback carver. Above 8 specimens and remaining untreated 4 specimens were stored at room temperature for about 7 days. Untreated 4 specimens of each type amalgam were polished with abrasive papers (Deer) from #400 to #1200 and finally on the polishing cloth with $0.5{\mu}m$ and $0.06{\mu}m$ $Al_2O_3 $ powder suspended water. Anodic polarization measurements was employed to compare the corrosion behaviours of the amalgams in 0.9% saline solution at $37^{\circ}C$. The open circuit potential was determined after 30 minutes immersion of specimen in electrolyte. The scan rate was 1 mV/sec and the surface area of amalgam exposed to the solution was $0.64cm^2$ for each specimen. All the potentials reported are with respect to a saturated calomel electrode (SCE). SEM images of each specimen were taken after + 800 mV (SCE) polarization. The results were as follows: 1. The corrosion potential of high copper amalgam was more anodic than that of low copper amalgam. 2. The polished amalgam were more resistant to corrosion than any other burnished and carved amalgam. 3. In the case of polishing, current density of high copper amalgam was lower than that of low copper amalgam.

  • PDF

Some nanotoxicity effects of copper (60-80 nm) and copper oxide (40 nm) nanoparticles on Artemia salina

  • Isil Canan Cicek Cimen;Durali Danabas;Mehmet Ates
    • Advances in nano research
    • /
    • 제16권5호
    • /
    • pp.501-508
    • /
    • 2024
  • In this study, nanotoxicity tests were made by exposure of Artemia salina to copper (Cu 60-80 nm) and copper oxide (CuO 40 nm) nanoparticles (NPs) at different concentrations (0.2, 1, 5, 10, 25, and 50 mg/L). The LC50 value of Cu (60-80 nm) NPs on the A. salina individuals at the beginning (0), 24th, 48th and 72nd hours and elimination period was 52.37 mg/L while the LC50 value of CuO (40 nm) NPs was 55.39 mg/L. The results of UV-Vis absorbance values showed that all statistical data revealed that maximum effect was observed between 24-30 hours and 25 ppm absorbance concentration was more effective. The multiple R, correlation coefficient (R2) and adjusted R2 values of Cu NP for the suitable Quadratic model were, respectively; 92.96 %, 86.42 % and 76.71 % while they are 98.31 %, 96.64 % and 94.25 % for CuO NP. Also, the data, was indicated effect size significantly changed based on the type and size of NP. Considering the microscope results, it was clearly noticed that A. salina organisms took the NPs in to their body. The accumulation in the gut of A. salina was observed and the images were taken with phase contrast microscope for both of NPs. The highest decrease for survival rates of A. salina individuals exposed to Cu NP was observed in the 10 ppm concentration (43.47 %) and in the 5 ppm concentration (46.20 %) for CuO NP. The results revealed that Cu and CuO NPS showed different toxic effects and that Cu NPs were more toxic than CuO.

Studies on Interaction of Essential Metal Ions with Bioactive Ligands

  • Tewari, Brij Bhushan
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권6호
    • /
    • pp.809-812
    • /
    • 2004
  • Complexation reactions of nitrilotriacetate (NTA) and penicillamine with $Cu^{2+}$ and $Co^{2+}$ have been studied in solution phase using paper electrophoresis technique. The stability constants of the complexes Cu(II)-nitrilotriacetate-penicillamine and Co(II)-nitrilotriacetate-penicillamine have been found to be $6.64{\pm}0.03\;and\;5.86{\pm}0.05$ (logarithm stability constant values), respectively at 35$^{\circ}C$ and ionic strength 0.1 M.

The production and application of therapeutic 67Cu radioisotope in nuclear medicine

  • Kim, Gye-Hong;Lee, Kyo Chul;Park, Ji-Ae;An, Gwang-Il;Lim, Sang Mo;Kim, Jung Young;Kim, Byung Il
    • 대한방사성의약품학회지
    • /
    • 제1권1호
    • /
    • pp.23-30
    • /
    • 2015
  • Radioisotopes emitting low-range highly ionizing radiation such as ${\beta}$-particles are of increasing significance in internal radiotherapy. Among the ${\beta}$-particle emitting radioisotopes, $^{67}Cu$ is an attractive radioisotope for various nuclear medicine applications due to its medium energy ${\beta}$-particle, gamma emissions, and 61.83-hour half-life, which can also be used with $^{64}Cu$ for PET imaging. The production and application of the ${\beta}$-emitting radioisotope $^{67}Cu$ for therapeutic radiopharmaceutical are outlined, and different production routes are discussed. A survey of copper chelators used for antibody labeling is provided. It has been produced via proton, alpha, neutron, and gamma irradiations followed by solvent extraction, ion exchange, electrodeposition. Clinical studies using $^{67}Cu$-labelled antibodies in lymphoma, colon carcinoma and bladder cancer patients are reviewed. Widespread use of this isotope for clinical studies and preliminary treatments has been limited by unreliable supplies, cost, and difficulty in obtaining therapeutic quantities.

사료중의 Cu 수준이 한우 거세우의 성장 및 도체특성에 미치는 영향 (Effect of Dietary Copper Levels on Performance and Carcass Characteristics in Hanwoo Steers)

  • 안병홍;조희웅;하경
    • Journal of Animal Science and Technology
    • /
    • 제47권4호
    • /
    • pp.583-592
    • /
    • 2005
  • 한우 거세우에 대한 Cu의 급여효과를 규명하기 위하여 농후사료중의 Cu 수준을 사료 kg당 7 mg, 12 mg 또는 17 mg의 3개 처리구에 각 5두씩 계 15두를 공시하여 435일간 비육시험을 실시한 결과는 다음과 같다. 일당증체량은 비육전기, 비육중기 및 비육후기 전기간에 걸처 Cu 7mg, 12mg 또는 17 mg 급여구간에 차이가 없었고 비육 전기간 평균에서도 각각 0.75, 0.76, 0.75kg으로서 처리구간에 유의적인 차이는 없었다. 사료섭취량은 처리구간에 비육전기에는 9.21-9.64 kg, 비육중기에는 9.53-9.75kg, 비육후기에는 10.09-10.93 kg으로 비육시기별로 큰 차이가 없었고 비육전기간에는 9.86-10.21 kg으로 처리구간에 큰 차이가 없었다. 사료효율은 비육전기에는 11.08-11.72, 비육중기에는 13.60-14.34, 비육후기에는 14.01- 15.20으로 처리구간에 큰 차이는 없었고 비육전기간에서도 13.31-13.99로 처리간에 차이가 없었다. 한우 거세우에게 Cu를 급여하였을 때 도체율은 58.4-59.2%로 처리구간에 차이는 없었다. 육량등급중에서 등지방두께는 8.2-10.4 mm로 처리구간에 큰 차이는 없었다. 배최장근단면적은 대조구와 12 mg 및 17 mg 급여구가 각각 78.4, 82.2 및 79.8 $cm^2$로 처리구간에 차이는 없었다. 육량지수는 68.10-68.91로서 처리구간에 차이는 없었다. 육량등급은 모두 B 등급으로서 처리구간에 차이가 없었다. 육질등급에서 가장 중요한 요인인 근내지방도는 Cu 7mg, 12mg 또는 17mg 급여구가 각각 3.6, 4.8 및 4.2로서 12 mg 첨가구가 약간 높게 나타났으나 처리구간에 유의적인 차이는 없었다. 육색, 지방색, 조직감 그리고 성숙도 등에서도 Cu 첨가구간에 큰 차이가 없었다. 육질등급은 처리구간에 모두 1등급을 받았고 Cu 수준간에 차이가 없었다. 경제성분석 결과 조수익은 대조구에서는 두당 2,577,483원, Cu 12mg 급여구는 2,920,432원, Cu 17mg 급여구는 2,653,227원으로써 Cu 12 mg 급여구가 7mg 급여구에 비해 13.3%, 17 mg 급여구에 비해 10.1%가 높게 나타났다. 이상과 같은 결과들을 종합해 볼 때 한우 거세우에게 농후사료 중에 Cu를 사료 kg당 7, 12 또는 17 mg을 넣어 주었을 때 성장, 육량 및 육질등급에서는 처리간에 차이가 없었으나 경제성에서는 12 mg 급여구가 조수익이 높았다.

Application of extraction chromatographic techniques for separation and purification of emerging radiometals 44/47Sc and 64/67Cu

  • Vyas, Chirag K.;Park, Jeong Hoon;Yang, Seung Dae
    • 대한방사성의약품학회지
    • /
    • 제2권2호
    • /
    • pp.84-95
    • /
    • 2016
  • Considerably increasing interest in using the theranostic isotopes/ isotope pairs of radiometals like $^{44/47}Sc$ and $^{64/67}Cu$ for diagnosis and/or therapeutic applications in the nuclear medicine procedures necessitates its reliable production and supply. Separation and purification of no-carrier-added (NCA) isotopes from macro quantitates of the irradiated target matrix along with other impurities is a cardinal procedure amongst several other steps involved in its production. Multitudinous methods including but not limited to liquid-liquid (solvent) extraction, extraction chromatography (EXC), ion exchange, electrodeposition and sublimation are routinely applied either solitarily or in combination for the separation and purification of radioisotopes depending on their production routes, radioisotope of interest and impurities involved. However, application of EXC though has shown promises towards the numerous separation techniques have not received much attention as far as its application prospects in the field of nuclear medicine are concerned. Advances in the recent past for application of the EXC resins in separation and purification of the several medically important radioisotopes at ultra-high purity have shown promising behavior with respect to their operation simplicity, acidic and radiolytic stability, separation efficiencies and speedy procedures with the enhanced and excellent extraction abilities. In this mini review we will be talking about the recent developments in the application and the use of EXC techniques for the separation and purification of $^{44/47}Sc$ and $^{64/67}Cu$ for medical applications. Furthermore, we will also discuss the scientific and practical aspects of EXC in the view of separation of the NCA trace amount of radionuclides.