• 제목/요약/키워드: Copper growth

검색결과 470건 처리시간 0.026초

남서해안 고사리 생육지의 토양화학적 특성과 고사리식물체의 무기성분 함량 (Nutrient Contents of Bracken (Pteridium aquilinum L.) and Soil Chemical Properties of Its Habitat in the Coastal Area)

  • 이수영;박강용;박양호
    • 한국토양비료학회지
    • /
    • 제43권5호
    • /
    • pp.631-636
    • /
    • 2010
  • 전남 신안군 내 고사리 재배농가들의 기술지원을 위하여 고사리 재배시험을 수행하면서 고사리 생육지의 토양특성을 조사하였고, 나물용 고사리와 성숙고사리의 식물체를 채취하여 이들의 무기성분 함량들을 분석하였으며 또한 고사리를 재배하고 있는 농가들의 포장토양과 고사리 시료들을 채취하여 분석 검토한 결과는 다음과 같다. 고사리 자생지의 토양은 pH가 5.2, 유기물 19 g $kg^{-1}$, 유효인산 20 mg $kg^{-1}$ 이었고, 치환성 칼륨, 칼슘 및 마그네슘의 함량은 각각 0.32, 2.0, 및 1.3 $cmol_c\;kg^{-1}$이 었으며, 재배지토양의 화학성은 pH가 5.7, 유기물 13 g$kg^{-1}$, 유효인산 367 mg $kg^{-1}$ 이었고, 치환성 칼륨, 칼슘 및 마그네슘의 함량은 각각 0.81, 4.0, 및 1.4 $cmol_c\;kg^{-1}$로 고사리 자생지의 토양 pH, 유효인산 및 치환성 칼슘의 함량이 매우 낮았으며, 유기물함량은 다소 높았다. 자생나물용 고사리의 무기성분 함량은 질소 4.40, 인 0.55, 칼륨 3.40, 칼슘 0.22, 마그네슘 0.32, 나트륨 0.09% 이었고, 철은 126, 망간 210, 구리 23, 아연 75, 붕소 11 mg $kg^{-1}$ 이었으며, 재배고사리의 무기성분 함량 중 질소는 5.50, 인 0.73, 칼륨 3.55, 칼슘 0.17, 마그네슘 0.28, 나트륨 0.07% 이었고, 철은 120, 망간 252, 구리 19, 아연 72, 붕소 20 mg $kg^{-1}$ 이었다. 나물용 고사리와 성숙고사리의 무기성분 함량을 비교해 보면 3요소 성분을 비롯한 대부분의 다량성분과 미량성분 모두 나물용고사리에서 높았고, 고사리가 성숙되어 갈수록 낮아지는 경향을 보였으며, 칼슘과 망간의 함량만은 성숙되어 갈수록 높아지는 경향을 나타내었다. 자생고사리와 재배고사리 간의 무기성분 함량을 비교한 결과 질소, 인, 칼륨 등 3요소 성분은 재배고사리에서 높은 경향이었고, 마그네슘 함량은 자생고사리에서 다소 높은 경향을 보였으며 그 외의 성분들은 일정한 경향을 보이지 않았다. 농가의 고사리 재배에서 재배 1년차와 2년차로 구분하여 토양의 화학성과 고사리 생육을 조사한 결과 토양화학성은 pH가 5.5~5.7, 유기물 함량이 13 g $kg^{-1}$, 유효인산이 222~367 mg $kg^{-1}$, 치환성양이온 중 칼륨 0.40~0.81, 칼슘 3.4~4.0, 마그네슘 1.4~1.6 $cmol_c\;kg^{-1}$이었고, 고사리의 생육은 1년차의 포장은 간장 (지표에서 잎가지가 있는 부분까지)이 25 cm, 입모 수는 13개 $m^{-2}$ 이었으며, 2년차 포장에서는 간장이 89 cm, 입모수가 25개로 조사 되었다.

Cu-Soy Proteinate(Cu-SP)와 Herbal Mixture(HBM)의 급여가 육계의 생산성, 소장 내 미생물 균총 및 면역체계에 미치는 영향 (Effects of Supplementary Cu-Soy Proteinate (Cu-SP) and Herbal Mixture (HBM) on the Growth Performance, Intestinal Microflroa, Immune Response in Broilers)

  • 김찬호;신광석;강환구;김지혁;황보종;최희철;문홍길;백인기;방한태
    • 한국가금학회지
    • /
    • 제41권3호
    • /
    • pp.165-171
    • /
    • 2014
  • 본 실험에서는 Cu-soy proteinate(Cu-SP)와 Herb-Mix(HBM)을 단독 또는 혼합 급여가 육계의 생산성, 혈액 성상, 면역 및 분내 미생물에 미치는 영향을 조사하기 위해 실시하였다. 육계(Ross308) 1,000수를 공시하여 5처리 4반복으로 반복 당 50수씩 완전 임의 배치하여, 자유 섭식하게 하였으며, 35일간 전기(0~21일), 후기(22~35일)로 나누어 실시하였다. 처리구들은 대조구(Control : negative control), 항생제구(Antibiotics : avilamycin 6 ppm 첨가구), Cu-SP(Cu-soy proteinate로 Cu 100 ppm 첨가구), HBM(지황 10%, 산약 10%, 당귀 20%, 오미자 5%, 감초 5%, 천궁 10%) 0.15% 첨가구, Cu-SP + HBM(Cu-soy proteinate로 Cu 100 ppm 첨가구 + HBM 0.15%) 첨가구 총 5 처리구였다. 35일의 사양 시험 결과, 전기 기간(0~21일)은 증체량, 사료 섭취량, 사료 요구량, 폐사율은 처리구 간에 유의적인 차이는 나타나지 않았다. 반면, 후기 기간(22~35일)에 사료 섭취량과 사료 요구량은 대조구가 유의적으로(P<0.05) 높았다. 전 기간(0~35일)에 증체량은 첨가구들이 유의적으로(P<0.05) 높았다. 반면, 사료 섭취량, 사료 요구량은 첨가구들이 유의적으로(P<0.05) 낮았다. 림프구(LY)는 Cu-SP + HBM구가 유의적으로(P<0.05) 높았으며, HE : LY 비율은 대조구가 유의적으로(P<0.05) 가장 높았다. 혈장 IgG 함량은 HBM 첨가구들이 유의적으로(P<0.05) 높았다. 혈장 IgA 함량은 처리구 간에 유의적인 차이는 나타나지 않았다. 유해균인 Cl. Perfringens는 대조구가 유의적으로(P<0.05) 높았으며, E. coli와 Lactobacillus는 처리구 간에 유의적인 차이는 나타나지 않았다. 결론적으로 Cu-SP와 HBM의 단독 급여나 혼합 급여는 둘 다 생산성을 증가시키며, 면역성상을 개선시키는 역할을 한다. 또한 소장 내 유해 미생물을 억제하는 긍정적인 효과를 보여주었다.

무전해 Ni-B 도금을 이용한 플라즈마 디스플레이 버스 전극용 확산방지막의 열처리 영향 (Effect of Heat Treatment of the Diffusion Barrier for Bus Electrode of Plasma Display by Electroless Ni-B Deposition)

  • 최재웅;황길호;홍석준;강성군
    • 한국재료학회지
    • /
    • 제14권8호
    • /
    • pp.552-557
    • /
    • 2004
  • Thin Ni-B films, 1 ${\mu}m$ thick, were electrolessly deposited on Cu bus electrode fabricated by electro deposition. The purpose of these films is to encapsulate Cu electrodes for preventing Cu oxidation and to serve as a diffusion barrier against copper contamination of dielectric layer in AC-plasma display panel. The layers were heat treated at $580^{\circ}C$(baking temperature of dielectric layer) with and without pre-annealing at $300^{\circ}C$($Ni_{3}B$ formation temperature) for 30 minutes. In the layer with pre-annealing, amount of Cu diffusion was lower about 5 times than that in the layer without pre-annealing. The difference of Cu concentration could be attributed to Cu diffusion before $Ni_{3}B$ formation at grain boundaries. However, the diffusion behavior of the layer with pre-annealing was similar to that of the layer without pre-annealing after $Ni_{3}B$ formation. With increasing annealing time, Cu concentration of both layers increased due to grain growth.

Sn계 무연 솔더에 관한 연구

  • 이창배;정승부;서창제
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
    • /
    • pp.75-87
    • /
    • 2001
  • Three different kinds of substrate used in this study : bare Cu substrate, Ni-P/Cu substrate with a Ni-P layer thickness of $5\mu\textrm{m},$ and Au/Ni-P/Cu substrate with the Ni-P and Au layers of $0.15\mu\textrm{m}$ and $5\mu\textrm{m}$ thickness respectively. The wettability of various Sn-base solders was affected by the substrate metal finish used, i.e., nickel, gold and copper. On the Au/Ni-F/Cu substrate, Sn-base solders wet better than any of the other substrate metal finishes tested. The interfacial reaction between various substrate and Sn-base solder was investigated at $70^{\circ}C,$ $100^{\circ}C,$ $120^{\circ}C,$ $150^{\circ}C,$ $170^{\circ}C$ and $200^{\circ}C$ for reaction times ranging from 0 day to 60 day. Intermetallic phases was formed along a Sn-base solder/ various substrate interface during solid-state aging. The apparent activation energy for growth of Sn-Ag/Cu, Sn-Ag-Bi/Cu, and Sn-Bi/Cu couples were 65.4, 88.6, and 127.9 Kj/mol, respectively. After isothermal aging, the fracture surface shoved various characteristics depending on aging temperature and time, and the types of BGA pad.

  • PDF

고체전해질용 CuO-$P_{2}O_{5}$-$Nb_{2}O_{5}$-$V_{2}O_{5}$계 유리의 결정화와 전기전도도 (Crystallization and conductivity of CuO--$P_{2}O_{5}$-$Nb_{2}O_{5}$-$V_{2}O_{5}$Glasses for Solid State Eletrolyte)

  • 손명모;이헌수;김종욱;김윤선;구할본
    • 한국전기전자재료학회논문지
    • /
    • 제14권6호
    • /
    • pp.475-480
    • /
    • 2001
  • Glasses in he system CuO-P$_2$O$_{5}$ -Nb$_2$O$_{5}$ -Nb$_2$O$_{5}$ -V$_2$O$_{5}$ were prepared by a press-quenching method on the copper plate. the glass-ceramics from these glasses were obtained by post-heat treatment, and the crystallization behavior and DC conductivities were determined. The conductivities of the glasses were range from 10$^{-6}$ s.$cm^{-1}$ / at room temperature ,but the conductivities of the glass-ceramics were 10$^{-3}$ s.$cm^{-1}$ / increased by 10$^3$ order. The crystalline product in the glass-ceramics was CuV$_2$O$_{6}$ . the crystal growth of CuV$_2$O$_{6}$ phase increased with heat-treatment conditions. The linear relationship between il($\sigma$T) and T$^{-1}$ suggested that the electrical conduction in the present glass-ceramics would be due to a small polaron hopping(SPH) mechanism.

  • PDF

Trichloroethylene(TCE)의 분해를 위한 메탄자화균총의 분리 및 배양 (Isolation and Cultivation of Methanotrophic Consortium for Trichloroethylene Degradation)

  • 이무열;신현재;염상필;양지원
    • KSBB Journal
    • /
    • 제13권5호
    • /
    • pp.483-490
    • /
    • 1998
  • Two unidentified methanotrophic strains (MM-white and MM-red) secreting soluble methane monooxygenase (sMMO) involved in thrichloroethylene biodegradation have been isolated from mixed methanotrophic consortium (MM) around Taejon area. Subsequently four methanotrophic strains were isolated from MM and named according to their color; white (MS-white), yellow (MS-yellow), pink (MS-pink) and reddish brown (MS-rbrown). All strains except MS-yellow which can take glucose as well as methane, metabolized methane as a sole carbon source. They all showed symbiotic behavior when methane was used as the sole carbon source. Optimum conditions of cell growth for MM were pH of 6.8 - 7.2, temperature of 29 - 32$^{\circ}C$, and gas flow rate of 6 (for methane), 40 (for air), and 4 ml/min (for carbon dioxide). The sMMO activity was expressed as naphthalene oxidation rate (${\mu}$mol/ mg protein/ hr). The sMMO activity for MM grown in flask culture with 1 ${\mu}$M of CuSO4 was 36, while it was 61 without copper. The activity for MM grown in the fermentor without CuSO4 was 1077, but is was 197 after reaction with 5 ppm of TCE. The methanotrophs showed significantly high sMMO activity despite the presence of 1 ${\mu}$M of CuSO4, although most of other strains already known could not express sMMO activity under this condition.

  • PDF

Studies on Physiology, Ecology and Protection of Citrus Canker Caused by Xanthomonas axonopodis pv, citri

  • Lee, Seong-Chan;Hyun, Jae-Wook;Kim, Dong-Hwan;Kim, Kwang-Sik;Lim, Han-Chul
    • 한국식물병리학회:학술대회논문집
    • /
    • 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
    • /
    • pp.124-124
    • /
    • 2003
  • Citrus canker is very important disease in international trade of citrus. The disease was usually take place from late of June, and severe middle of July to middle of August, though disease occurrence was affected by environmental conditions. In pathogenicity test, three varieties, orange, lemon and kiyomi among 7 varieties, were succeptible, two varieties, satsuma mandarin and iwasachi, intermediate resistant. On the other hand, shiranuhi and yuzu were resistant relatively. The pathogen, Xanthomonas axonopodis pv. citri, grew well in PD broth adjusted to pH 7.0 at 26$^{\circ}C$. It's growth was best in medium containing group of monosaccharide as a carbon source and group of ammonium as a nitrogen source. Tow isolates were resistant to streptomycin among 11 isolates isolated from diseased leaves in field in Jeju-Do. The streptomycin sensitives isolate was controlled by in greenhouse test. On the other hand, the resistant and sensitive isolates were controlled by treatment with copper sulfate, the control value is 88.7% and 90.6%, respectively.

  • PDF

Effect of GlycinecinA on the Control of Bacterial Leaf Spot of Red Pepper and Bacterial Leaf Blight of Rice

  • Jeon, Yong-Ho;Moonjae Cho;Cho, Yong-Sup;Ingyu Hwang
    • The Plant Pathology Journal
    • /
    • 제17권5호
    • /
    • pp.249-256
    • /
    • 2001
  • Xanthomonas axonopodis pv. glycines 8ra produces a bacteriocin called glycinecinA, which specifically inhibits the growth of bacteria belonging to Xanthomonas species. GlycinecinA was produced by culturing Escherichia coli DH5 containing biosynthetic genes for glycinecinA, and was tested for its control effect against X. vesicatoria on red pepper and X. oryzae pv. oryzae on rice. The bacteriocin activity was much higher in the cell extract than in the supernatant. It reached a maximum level at the stationary phase, ws maintained up to 2 months at room temperature and approximately 10 months at $4^{\circ}$. The optimum concentration of glycinecinA for the control in the greenhouse and in the field was 12,800 AU/ml. In this study, the activity of glycinecinA on rice and red pepper leaves continued for 7-8 days, during which the pathogen populations remained at low levels. Bacterial leaf spot of red pepper and bacterial leaf blight of rice were significantly reduced by the bacteriocin treatments. The control efficacy was as high as, or even higher than, the chemical treatment of copper hydroxide. These results suggest that the bacteriocin is a potential control agent for bacterial diseases.

  • PDF

양돈 퇴, 액비 내 중금속 및 항생제의 토양 흡착특성 연구 (Soil Adsorption Characteristics of Heavy Metals and Antibiotics in Piggery Waste Fertilizer)

  • 어성욱
    • 한국습지학회지
    • /
    • 제14권3호
    • /
    • pp.365-374
    • /
    • 2012
  • 양돈 농가에서 구리, 아연 등의 성장촉진제와 항생제들이 사료 첨가제로 사용되는데 사료에 주입된 많은양이 분뇨로 배설되고 있다. 국내 양돈 폐수의 90% 이상이 퇴, 액비 형태로 농지에 적용되고 있는 상황에서 퇴,액비 내에 함유된 중금속과 항생물질은 토양에 흡착되어 농지에 잔류하거나 지하수나 지표수로 유출되어 수계로 빠져나간다. 농지에 살포된 중금속과 항생물질의 토양 내에서의 거동을 살펴보기 위해 실험실 기초 실험을 수행하였는데, Jar test와 칼럼 용출 실험을 수행하였다. 실험결과 아연의 86.4와 구리의 68%가 토양에 흡착되는 것으로 나타난 반면, 액비에 포함된 항생물질의 60% 이상은 칼럼 유출수로 용출되는 것으로 나타났다.

수소 환원기체와 (hfac)Cu(3,3-dimethyl-1-butene) 증착원을 이용한 Pulsed MOCVD로 Cu seed layer 증착 특성에 미치는 영향에 관한 연구 (Pulsed MOCVD of Cu Seed Layer Using a (hfac)Cu(3,3-dimethyl-1-butene) Source and H2 Reactant)

  • 박재범;이진형;이재갑
    • 한국재료학회지
    • /
    • 제14권9호
    • /
    • pp.619-626
    • /
    • 2004
  • Pulsed metalorganic chemical vapor deposition (MOCVD) of conformal copper seed layers, for the electrodeposition Cu films, has been achieved by an alternating supply of a Cu(I) source and $H_2$ reactant at the deposition temperatures from 50 to $100^{\circ}C$. The Cu thickness increased proportionally to the number of cycles, and the growth rate was in the range from 3.5 to $8.2{\AA}/cycle$, showing the ability to control the nano-scale thickness. As-deposited films show highly smooth surfaces even for films thicker than 100 nm. In addition about a $90\%$ step coverage was obtained inside trenches, with an aspect ratio greater than 30:1. $H_2$, introduced as a reactant gas, can play an active role in achieving highly conformal coating, with increased grain sizes.