• Composites Research
• /
• 제12권5호
• /
• pp.87-97
• /
• 1999

층상복합재료란 이종재료들을 적층하여 계면에서 확산에 의하여 새로운 금속조직을 제어하는 것으로 정의한다. 기계적 성질이 다른 금속이 결합하여 서로의 단점을 보완·개선함으로써 재료의 기계적 성질을 한층 더 향상시킬 뿐만 아니라, 동시에 전기적 성질도 향상시킬 수 있는 재료로 그 종류는 다양하며 용도도 광범위하다. 본 연구에서는 Al/Cu 피복이종복합재료를 직·간적압출하는데 필요한 성형 조건을 도출하기 위하여 유한요소 상용 package인 DEFORM을 이용하여 이종복합재료의 거동해석을 수행하였다. 압출해석에 필요한 물성치를 구하기 위하여 본 연구에서 제조한 재료를 이용하여 압축실험을 수행하였으며, 압출방법, 압출온도, 피복재의 두께 등의 변화에 다른 이종복합재료의 거동을 파악하였다. 또한 해석결과를 바탕으로 이종복합재료의 열간압출실험의 결과와 비교·검토하였다.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.939-948
• /
• 2012

A 3-ply clad metal consisting of aluminum and copper was fabricated by roll bonding process and the microstructures and mechanical properties of the roll-bonded and post-roll-bonding heat treated Cu/Al/Cu clad metal were investigated. A brittle interfacial reaction layer formed at the Cu/Al interfaces at and above $400^{\circ}C$. The thickness of the reaction layer increased from $12{\mu}m$ at $400^{\circ}C$ to $28{\mu}m$ at $500^{\circ}C$. The stress-strain curves demonstrated that the strength decreased and the ductility increased with heat treatment up to $400^{\circ}C$. The clad metal heat treated at $300^{\circ}C$ with no indication of a reaction layer exhibited an excellent combination of the strength and ductility and no delamination of layers up to final fracture in the tensile testing. Above $400^{\circ}C$, the ductility decreased rasxpidly with little change of strength, reflecting the brittle nature of the intermetallic interlayers. In Cu/Al/Cu clad heat treated above $400^{\circ}C$, periodic parallel cracks perpendicular to the stress axis were observed at the interfacial reaction layer. In-situ optical microscopic observation revealed that cracks were formed in the Cu layer due to the strain concentration in the vicinity of horizontal cracks in the intermetallic layer, promoting the premature fracture of Cu layer. Vertical cracks parallel to the stress axis were also formed at 15% strain at $500^{\circ}C$, leading to the delamination of the Cu and Al layers.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.109-115
• /
• 1997

Laser cladding is a technique for modification of metal surface. In this laser cladding experiment a metal powder feeding system was developed for more efficient laser cladding. This system can reduce processing time and be used simpler than the conventional method. The feeding of metal powder has given a rise to the process for sequential buildup of bulk rapidly solidified materials in the form of fine powder stream to the laser cladding process. The parameters of laser cladding have been investigated using this experimental equipment. Bronze on aluminum alloy and copper on aluminum alloy were experimented by using defocused beam, powder feeding system, and gas shielding. Good cladding was achieved in the range of beam travel speed of 2.25m/min. In the case of copper/aluminum and bronze/aluminum substrate, the absorption of laser beam was too high to produce low diluted clad. In the case of copper/1050 aluminum, the optimal laser cladding condition was of laser power of 2.8kW, powder feed rate of 0.31g/s and beam travel speed of 2.25m/min. In the case of bronze/aluminum the optimal condition is of laser power of 2.5kW, powder feed rate of 0.31g/s, and beam travel speed of 2.36m/min.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.140-143
• /
• 1997

The present study is concerned with the hydrostatic extrusion process of copper-clad aluminium bar to investigate the basic flow characteristics. Considering the bonding mechanism of bi-metal contact surface as cold pressure welding, the normal pressure and the contact surface expansion are selected as process parameters governing the bonding condition. The critical pressure required for the bonding at the interface is obtained by solving a "local extrusion" using a slip line meyhod. A viscoplastic finite element method is used to analyze the steady state extrusion process. The boundary profile of bi-metal rod is predicted by tracking a particle path adjacent to interface surface. The variations of contact surface area and the normal pressure along the interface profile are predicted and compared to those by experiments.

• 소성∙가공
• /
• 제7권1호
• /
• pp.66-71
• /
• 1998

The present study is concerned with the hydrostatic extrusion process of copper-clad aluminium bar to investigate the bonding conditions as well as the basic flow characteristics. Considering the bonding mechanism of bi-metal contact surface as cold pressure welding the normal pressure and the contact surface expansion are selected as process parameters governing the bonding conditions, in this study the critical normal pressure required for the local extrusion-the protrusion of virgin surfaces by the surface expansion at the interface-is obtained using a slip line method and is then used as a criteron for the bonding. A rigid plastic finite element method is used to analyze the steady state extrusion process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-cent to interface surface. The contact surface area ration and the normal pressure along the interface are calculated and compared to the critical normal pressure to check bonding. It is found that the model predictions are generally in good agreement with the experimental observations. The compar-isons of the extrusion pressure and interface profile by the finite element with those by experi-ments are also given.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.225-228
• /
• 2003

This paper is concerned with pressure welding, which has been known as a main bonding mechanism for the cold and warm clad forming. Bonding characteristics of pressure welding between the copper and aluminum plates are experimentally investigated. Experiments are performed at the cold and warm temperature range with the variation of important factors such as magnitude of pressure, surface roughness of Cu and Al plates, and pressure holding time. It could be concluded that the bonding criterion might be given as a function of bonding pressure and surface roughness for the cold and warm temperature ranges.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.811-818
• /
• 2009

In order to meet increasingly complex and rigorous technical specifications, extensive effort has been devoted to fabricate clad materials with multi-layered metal plates. In this study, novel stainless steel/aluminum/copper (STS/Al/Cu) three-ply clad materials were fabricated by a hot rolling process for cookware applications. The effect of the testing temperature on the mechanical properties of the clad materials and on each component metal was investigated during the tensile tests. The interface properties of the clad materials were also examined by optical microscopy (OM) and an electron probe micro-analyzer (EPMA). The best mechanical and interfacial properties for a warm working process were found in a sample annealed at a temperature of $300^{\circ}C$. For the sample annealed at $400^{\circ}C$, the results of the tensile test indicated that interface delamination occurred only in the region of the Al/Cu interfaces. This was due to the formation of the thick and brittle intermetallic compound of $Al_2Cu$ in the Al/Cu interface. In contrast, no interface delamination was observed in the STS/Al interface, most likely due to its strong bond strength.

• 대한전자공학회논문지SD
• /
• 제47권4호
• /
• pp.69-74
• /
• 2010

알루미늄 양극산화(aluminum anodization)의 선택적인 적용을 통하여 DRAM 소자를 위한 새로운 패키지 기판을 제작하였다. 에폭시 계열의 코어(core)와 구리의 적층 형태로 제작되는 일반적인 패키지 기판과는 달리 제안된 패키지 기판은 아래층 알루미늄(aluminum), 중간층 알루미나(alumina, $Al_2O_3$) 그리고 위층 구리(copper)로 구성된다. 알루미늄 기판에 양극산화 공정을 수행함으로써 두꺼운 알루미나를 얻을 수 있으며 이를 패키지 기판의 유전체로 사용할 수 있다. 알루미나층 위에 구리 패턴을 배치함으로써 새로운 2층 금속 구조의 패키지 기판을 완성하게 된다. 또한 알루미늄 양극산화를 선택적인 영역에만 적용하여 내부가 완전히 채워져 있는 비아(via) 구조를 구현할 수 있다. 패키지 설계 시에 비아 인 패드(via in pad) 구조를 적용하여 본딩 패드(bonding pad) 및 볼 패드(ball pad) 상에 비아를 배치하였다. 상기 비아 인 패드 배치 및 2층 금속 구조로 인해 패키지 기판의 배선 설계가 보다 수월해지고 설계 자유도가 향상된다. 새로운 패키지 기판의 주요 설계인자를 분석하고 최적화하기 위하여 테스트 패턴의 2차원 전자기장 시뮬레이션 및 S-파라미터 측정을 진행하였다. 이러한 설계인자를 바탕으로 모든 신호 배선은 우수한 신호 전송을 얻기 위해서 $50{\Omega}$의 특성 임피던스를 가지는 coplanar waveguide(CPW) 및 microstrip 기반의 전송선 구조로 설계되었다. 본 논문에서는 패키지 기판 구조, 설계 방식, 제작 공정 및 측정 등을 포함하여 양극산화 알루미늄 패키지 기판의 특성과 성능을 분석하였다.

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.95-100
• /
• 2010

LED (Light Emitting Diode)는 인가된 에너지 대비 15%가 빛으로, 나머지 85%가 열로 변환되는 것은 이미 잘 알려져 있다. 최근 LED칩 용량이 증가함에 따라서 LED칩으로부터 방출되는 열은 더욱 증가하게 되고 이는 LED 제품의 성능저하와 수명단축에 직접적인 영향을 미친다. 따라서, 산업계에서는 고출력 LED 칩에서 발생하는 열을 제어하기 위해 제품설계구조 연구가 진행 중에 있으며 또한, 부가적으로, 기존의 알루미늄, 접착제 및 구리를 사용하는 MCL(Metal Clad Laminate)구조에서 저가형 FR4 및 구리를 사용하는 CCL (Copper Clad Laminate)로 변경하여 원가절감을 하고자 하는 대체 소재연구가 진행되고 있다. 본 연구에서는 저가형 CCL에 열방출 극대화를 위하여 열비아(thermal via)를 디자인별로 형성한 후 1 W급 LED 칩을 실장하여 열저항(thermal resistance) 변화를 분석하였으며, 최적의 열방출을 위한 열비아 구조를 제안하고자 하였다.

• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.227-232
• /
• 1996

(i) The development of a metallurgical bond during the spray forming of clad products has offered the possibility of manufacturing large rolls, including those used in hot and cold strip mills. Small rolls are already being produced in Japan. (ii) Technical developments, including the use-of-multi-atomizers have resulted in the elimination of porosity from the internal bore of a sprayed tube. Bimetallic tubing can also be manufactured and the installation of a 4.5 ton tube plant in the USA should provide low operation costs. (iii) Spray forming offers a potentially low cost manufacturing route for superalloy ring/casing components in high strength superalloys. (iv) A large pilot plant has been built for the spray forming of ultra-clean superalloys for turbine disc applications. (v) Using twin-atomizing technology, special steel billets have been spray formed up to 400mm diameter with deposition yields in excess of 90%. (vi) Al/Si alloy extrusion billets with excellent dimensional tolerances are being manufactured for large scale automotive applications. Several new aluminum alloys have also been developed, including high strength, low density and low cocfficient of expansion materials. (vii) New copper alloys have been developed and pilot plants are in operation to produce these alloys once markets have become established.