• 박물관보존과학
• /
• 제23권
• /
• pp.91-108
• /
• 2020

본 연구는 천안, 공주, 서산, 익산, 나주, 합천에서 출토된 금동관 7점을 중심으로 비파괴 분석법을 활용하여 재질 특성을 조사하였다. 금동관은 고깔 모양의 모관을 기본으로 하며, 전·후입식, 대롱, 수발, 영락 등의 장식을 가감하여 부착된다. 문양은 용문, 봉황문, 초화문, 타출문 등을 조금기법, 투조기법, 인각기법 등으로 시문하였다. 형태적 특징은 제작시기 및 출토 지역에 따라 차이를 보인다. 소지 금속은 순동과 소량의 납이 포함된 동으로 구분된다. 표면 도금은 아말감기법을 사용하였으며, 순금과 소량의 은이 함유된 금으로 분류된다. 옥전 23호 출토품의 은 함량이 높아 지역적인 차이를 보인다. 도금 두께는 백제 금동관에 비해 백제계 금동관인 옥전 23호분이 두꺼운 것으로 평가된다. 도금횟수는 1~2회인 반면 백제계 금동관인 합천 옥전 23호분 금동관은 최대 3회로 평가되며, 차이를 보이는 것을 알 수 있다.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.151-155
• /
• 2009

Micro-scale copper bumps for build-up PCB were electroplated using a pulse-reverse method. The effects of the current density, pulse-reverse ratio and brightener concentration of the electroplating process were investigated and optimized for suitable performance. The electroplated micro-bumps were characterized using various analytical tools, including an optical microscope, a scanning electron microscope and an atomic force microscope. Surface analysis results showed that the electroplating uniformity was viable in a current density range of 1.4-3.0 A/$dm^2$ at a pulse-reverse ratio of 1. To investigate the brightener concentration on the electroplating properties, the current density value was fixed at 3.0 A/$dm^2$ as a dense microstructure was achieved at this current density. The brightener concentration was varied from 0.05 to 0.3 ml/L to study the effect of the concentration. The optimum concentration for micro-bump electroplating was found to be 0.05 ml/L based on the examination of the electroplating properties of the bump shape, roughness and grain size.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.97-104
• /
• 2016

L-ascorbic acid 환원제를 사용하는 무전해 은도금 공정으로 Ag 코팅 Cu 플레이크를 제조하는 과정에서 전처리 방법 및 L-ascorbic acid의 농도에 따른 Ag 코팅층의 균일도 변화와 대기 중 승온에 따른 내산화 특성을 평가하였다. 전처리 방법에 따른 Cu 플레이크 표면 산화층의 제거 정도가 Ag 코팅층의 균일도에 큰 영향을 미치는 것을 관찰할 수 있었고, 플레이크에서의 홀 결함 발생정도도 Ag 코팅 Cu 플레이크의 내산화 특성에 다소 영향을 미쳤다. 또한 L-ascorbic acid 환원제의 농도는 Ag 코팅층의 생성 균일도 및 두께 등에 큰 영향을 미치는 대표 공정변수임을 확인할 수 있었는데, L-ascorbic acid의 농도가 0.04 M일 경우 가장 우수한 품질의 Ag 코팅 Cu 플레이크가 제조되었나, 농도를 0.06 M로 증가시킬 경우 미세한 순수 Ag 입자들의 생성으로 인해 Ag가 코팅되지 않은 Cu 표면 면적이 증가하면서 시료의 내산화 특성을 크게 감소시켰다.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.475-480
• /
• 2017

본 논문에서는 레이저 유도증착 공정을 사용하여 절연기판위에 미세패턴의 전도성 향상시켰다. 기존의 레이저 유도증착의 공정에서 발생하는 높은 레이저빔 에너지로 인하여, 미세패턴의 낮은 증착밀도, 산화와 같은 문제점이 있다. 이러한 문제점을 폴리머 코팅층을 사용하여 증착정밀도와 전도성 향상하였다. 실리콘 웨이퍼 위에 미세패턴 증착을 위해서 크롬, 구리를 사용하였다. 본 연구에서는 다중펄스 방식의 레이저 빔을 금속박막에 조사하여 절연기판(insulating substrate: $SiO_2$) 위에 시드 층을 형성하고, 형성된 시드 층위에 무전해 도금을 적용하여 미세패턴 및 구조물을 제작하는 복합공정기술을 개발하였다. 레이저빔의 다중 스캔방식으로 조사함으로서 레이저빔의 에너지가 증착 층의 증착밀도와 표면품위를 향상시키고, 미세전극 패턴으로 사용가능한 전기 전도성을 갖게 되었음 알 수 있었다. 레이저 직접묘화법과 무전해 도금을 적용한 복합공정을 이용하여 미세전극을 증착 한 후 비저항을 측정한 결과 도금 전 저항이 $6.4{\Omega}$, 도금 후의 저항이 $2.6{\Omega}$으로 미세전극 패턴의 표면조직이 균일하고 증착되었다. 표면조직이 균일하고 치밀하게 증착되었기 때문에 전기 전도도가 약 3배정도 향상되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.118-121
• /
• 2007

Bulk metallic glass (BMG)/crystalline composites comprising a copper based BMG alloy and crystalline nickel were produced by means of eloctroless plating of nickel on $Cu_{54}Zr_{22}Ti_{18}Ni_6$ BMG powder and subsequent consolidation using spark plasma sintering. The plastic deformation behavior of BMG/crystalline composites was examined by uniaxial compression test at various temperatures in the supercooled liquid region (SLR) of the BMG alloy. The evolution of strain states during uniaxial compression was tackled by microstructure observations. Deformation temperature played an important role in the deformation behavior of BMG/crystalline composites, which was attributed to a strong temperature dependence of the flow stress of the BMG alloy in the SLR. BMG/crystalline composites deformed homogenously in the temperature range where the flow stress of the BMG alloy was close to that of crystalline nickel. In contrast, inhomogeneous deformation was observed in the temperature range where the flow stress of the BMG alloy largely differs from that of crystalline nickel.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권4호
• /
• pp.93-96
• /
• 2000

Microchannel plates (MCPs) have been developed by introducing new materials and process technologies. Main body was made of alumina by programmable punching, laminating, and firing. The channel walls of pore arrays of an MCP were deposited with thin films by electroless copper plating and sol-gel process. Our MCP has advantages such as easy fabrication, durability, high temperature endurance, and applicability to the large size comparing with the conventional MCPs. Experiments on the brightness of an MCP incorporated FED revealed that the FED with a MCP is three to four times brighter than a conventional FED. Moreover, the focusing in a FED is improved. Incorporating an MCP into a FED is one of promising methods to enhance the characteristics of the FED. In addition, amplification yield of the MCP is measured for varying the aspect ratio and the input current.

• 센서학회지
• /
• 제27권5호
• /
• pp.340-344
• /
• 2018

Electrodes are an important part of electrocardiography (ECG); disposable electrodes have been extensively used. However, personal ECG monitoring devices for Internet of Things applications require reusable electrodes. As there have been no systematic studies on the characteristics of reusable electrodes to date, we conducted this study to assess the performance and feasibility of electrodes with different materials. We built reusable electrodes using twelve different metallic materials, including commonly used copper, silver, zinc, plating materials, chemically inert titanium, stainless steel, and aluminum. Each electrode was fabricated to a size of $5{\times}10mm$. Their characteristics such as offset, baseline drift, stabilization time, and chemical inertness were compared. A personal ECG monitoring system was used to test the manufactured electrodes. The performances of the Ag, Cu, and Zn electrodes were better than the performances of other electrodes. However, these materials may not be used owing to the chemical changes that occur when the electrodes are in contact with the skin, such as discoloration and corrosion, which deteriorate their electrical characteristics. Titanium, stainless steel, and aluminum are chemically stable. The titanium electrode showed the best performance among the three, and it is our recommendation as a material for manufacturing reusable electrodes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.12-12
• /
• 2008

Ruthenium is one of the noble metals having good thermal and chemical stability, low resistivity, and relatively high work function(4.71eV). Because of these good physical, chemical, and electrical properties, Ru thin films have been extensively studied for various applications in semiconductor devices such as gate electrode for FET, capacitor electrodes for dynamic random access memories(DRAMs) with high-k dielectrics such as $Ta_2O_5$ and (Ba,Sr)$TiO_3$, and capacitor electrode for ferroelectric random access memories(FRAMs) with Pb(Zr,Ti)$O_3$. Additionally, Ru thin films have been studied for copper(Cu) seed layers for Cu electrochemical plating(ECP) in metallization process because of its good adhesion to and immiscibility with Cu. We investigated Ru thin films by thermal ALD with various deposition parameters such as deposition temperature, oxygen flow rate, and source pulse time. Ru thin films were grown by ALD(Lucida D100, NCD Co.) using RuDi as precursor and $O_2$ gas as a reactant at 200~$350^{\circ}C$.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.149-156
• /
• 2013

The performances of solar collectors with single and double evacuated tube were experimentally compared. The solar collector with single evacuated tube using surface treatment in this study consists of radiation fin, heat pipe, absorber plate, glass tube, cap and regulating valve, and so on. Surface treatment was conducted for heat pipe and absorber plate with black chrome plating and copper black coating. As the results, the performance of solar collector with single evacuated tube using surface treatment showed good results compared that of double evacuated tube. Absorber plate played a positive role in performance and showed increase of about 28%. Further performance depends on vacuum degree and vacuum degree has to be considered economical efficiency in solar collector.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.386.1-386.1
• /
• 2014

The ionic polymer-metal composite (IPMC), a type of electro-active polymer material, has received enormous interest in various fields such as robotics, medical sensors, artificial muscles because it has many advantages of flexibility, light weight, high displacement, and low voltage activation, compare to traditional mechanical actuators. Mostly noble metal materials such as gold or platinum were used to form the electrode of an IPMC by using electroless plating process. Furthermore, carbon-based materials, which are carbon nanotube (CNT) and reduced graphene-CNT composite, were used to alter the electrode of IPMC. To form the electrode of IPMC, we employ the synthesized graphene on copper foil by chemical vapor deposition method and use the transfer process by using a support of PET/silicone film. The properties of graphene were evaluated by Raman spectroscopy, UV/Vis spectroscopy, and 4-point probe. The structure and surface of IPMC were analyzed via field emission scanning electron microscope. The fabricated IPMC performance such as displacement and operating frequency was measured in underwater.