• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.612-621
• /
• 2018

In this study, $TiO_2$ nanotube plate and metal electrodes(Copper, Nickel, Stainless Steel, Aluminum, Tin, Titanium) were compared on cathodic reduction of nitrate ($NO_3{^-}-N$) during electrolysis. The electrochemical characteristics were compared based on electrochemical impedance spectroscopy (EIS). The surface morphology was obtained using scanning electron microscopy (SEM) method. Brunauer-Emmett-Teller (BET) method was implemented for the specific surface area analysis of the cathodes. To study kinetics, 90 minute batch electrolysis of nitrate solution was performed for each cathodes. In conclusion, under the condition of relatively low ($0.04 A\;cm^{-2}$) current density, $TiO_2$ nanotube plate showed no surface corrosion during the electrolysis, and the reaction rate was measured the highest in the kinetic analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.3
• /
• pp.263-269
• /
• 2017

The mineral contents, and free amino acid, and fatty acid composition of rack and bag or suspended cultured oysters Crassostrea gigas were compared. The moisture content did not change much from 82.8% to 86.3% in the different culture methods. The glycogen level was low 4.7% during rack and bag culture but high 7.2% during suspended culture. The sodium level was the highest during suspended culture, while copper and zinc level were highest during rack and bag culture. The taurine level was 1,385-1,375 mg/100 g in oyster cultured using the rack and bag method, but that in the market sample was lowest at 1,015.8 mg/100 g. Hydroxyproline, glutamic acid, proline, glycine, and alanine were detected at high levels in the experimental oysters. The polyunsaturated fatty acid content was similar among samples. The docosahexaenoic acid level was 14% with rack and bag culture and 12% with suspended culture, whereas the eicosapentaenoic acid level was 15% with rack and bag culture and 20% with suspended culture. The atherogenic index (AI), thrombogenicity index (TI), and hypocholesterolemic/ hypercholesterolemic (h/H) ratio were important factors in the nutritional evaluation. The AI and TI values were 0.5-0.2, and the h/H ratio were 2.0 and 2.4 with the rack and bag and suspended culture, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.210-215
• /
• 2006

Mechanical alloying (MA) by high energy ball mill of pure copper and niobium powders was carried out under the Ar gas atmosphere. The supersaturated solid solution can be produced in the range up to $Cu_xNb_{100-x}$(x=5-30) by MA for 120 hrs, as demonstrated by X-ray diffraction, DSC analysis and the electronic studies through a change in the superconducting transition in the low-temperature specific heat. The $Cu_{30}Nb_{70}$ samples ball-milled for 120 hrs exhibit only a broad exothermic heat release. The total energy, ${\Delta}H_t$ accumulated during MA far the mixture of $Cu_{30}Nb_{70}$ powders increased with milling time and approached the saturation value of 7.5 kJ/mol after 120 h of milling. It can be seen that the free energy difference between the supersaturated solid solution and the mixture of $Cu_{30}Nb_{70}$ powders is estimated to be 7 kJ/mol by Miedema et al. Hence it is thermodynamically possible to assume the formation of a supersaturated solid solution phase in this system.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.683-690
• /
• 1996

In this study, the diffusion barrier properties of $1000 \AA$ thick molybdenum compounds (Mo, Mo-N, $MoSi_2$, Mo-Si-N) were investigated using sheet resistance measurements, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM), and Rutherford backscattering spectrometry (RBS). Each barrier material was deposited by the dc magnetron sputtering, and annealed at 300-$800^{\circ}C$ for 30min in vacuum. Mo and $MoSi_2$ barrier were failed at low temperature due to Cu diffusion through grain bound-aries and defects of Mo thin film and the reaction of Cu with Si within $MoSi_2$ respectively. A failure temperature could be raised to $650^{\circ}C$-30min in the Mo barrier system and to $700^{\circ}C$-30min in the Mo-silicide system by replacing Mo and $MoSi_2$ with Mo-N and Mo-Si-N, respectively. The crystallization temperature in the Mo-silicide film was raised by the addition of $N_2$. It is considered that not only the N, stuffing effect but also the variation of crystallization temperature affects the reaction of Cu with Si within Mo-silicide. It was found that Mo-Si-N is more effective barrier than Mo, $MoSi_2$, or Mo-N to copper penetration preventing Cu reaction with the substrate for 30min at a temperature higher than $650^{\circ}C$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.65-69
• /
• 2009

We studied to compare the fractionation patterns of Ni, Cu, Zn in Jeju volcanic ash soils and to elucidate the uptakes of them by Pakchoi(Brassica campestris var. chinensis). Fractionation patterns of soils by sequential extraction method were different and make to distinguish from various soil types. In Pakchoi, the transfer rates of Ni, Cu, Zn from root to shoot were also different by metal types. There are low corelation between fractional contents in soil and contents in plants of trace elements except for exchangeable Zn. It is needed to develop novel methods for the assessment soil Ni in relation to plant uptake because of poor corelation.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.444-449
• /
• 1998

There are various shielding materials that have been considered; the use of a metallic plate or the layering of a conductive material on a plastic surface and the insertion of filler in plastics. All of these methods have shown their merits and weakness. Therefore, many studies have concentrated on developing materials that effectively cut down EMI without increase in weights of housing materials. In these respects, this study has focused on investigations of the shielding effect of materials that have electroless nickel plating on the lamella structured micro particles surface with low specific gravity. When a film of electroless nickel were plated on a micro particle surfaces and then mixed with paint, the electromagnetic shielding effects were measured as 63dB. Although these effects were less than that 90dB of the copper plate, trials in a series of 6 times increased the shielding effect by IOdB and is applicable to wide range of EMI shielding.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.2
• /
• pp.75-81
• /
• 2004

A large amount 2.1×106 ㎥ of the polluted sediment was dredged from the Masan Bay and deposited in Gapo confined area, Masan. The dissolved metal concentrations of seawater in the dumping site (Gapo area) were observed during one tidal cycle and compared with those of seawater obtained from Jinhae Bay. The sediment was evaluated as from Non polluted to Moderately polluted by USEPA standards. It was judged that toxicological effects of sediment analyzed ranged from ERL to ERM with copper and zinc, and ERL with cadmium, chrome, lead, and nickel by the Adverse Biological Effects. The pollutant concentration was low in surface sediment compared to deeper sediment since the sediments with relatively low concentrations of pollutant were dumped to the surface. The pollutant concentration was low in surface sediment compared to deeper sediment since the sediments with relatively low concentrations of pollutant were dumped to the surface. The benthic organisms in Gapo area had higher concentrations of trace metals (Oyster: Zn 238.96, Cu 5.29 ㎍/g wet wt., Clam: Zn 17.71, Cu 1.00 ㎍/g wet wt., Mussel. Zn 187.98, Pb 0.28, Cr 0.15, Mn 4.23, Sr 1.45 and Fe 100.33 ㎍/g wet wt.) compared to outside of dumping site. However, the trace metal level in the bivalves was less than the NFPQIS (National Fisheries Products Quality Inspection Service) standard.

• Journal of Korean Society of Forest Science
• /
• v.83 no.1
• /
• pp.6-11
• /
• 1994

Three different types of tissue taken from three game birds such as Ring-necked Pheasant, Rufous Turtle Dove, Mallard and a mammal, Korean Water Deer were analyzed for five heavy metals such as iron, zinc, copper, lead and cadmium. The main purpose of this study was to make clear the background levels of the metal concentrations in the tissues of these game species. The metal levels were generally low and could be considered as the background levels. But some markedly high levels of lead were recorded in the muscles of birds shot by the shotgun. The implications of these results were discussed with respect to the health of people.

• Particle and aerosol research
• /
• v.11 no.1
• /
• pp.9-19
• /
• 2015

This study investigated the effects of ball mill operation condition on the morphology of raw powders in the dry-type milling process using three types of ball mills traditional ball mill, stirred ball mill and planetary ball mill. Furthermore, since spherical powders offer the best combination of high hardness and high density, the optimum milling condition to produce sphere-shaped powders was studied. The applied rotation speed ranged from 200rpm (low rotation speed) to 700rpm (high rotation speed). The used ball size ranged from 1mm to 5mm. The metal powder morphology was studied using SEM, XRD and PSA. The aimed spherical powders could be obtained under the optimum experimental conditions: traditional ball mill(200rpm, 1mm ball), planetary ball mill (500rpm, 1mm ball) and also planetary ball mill (700rpm, 1 and 3 mm ball). The results show to the development of new material using spherical type copper powder/CNT composites for air-craft and automotive applications.

• Nutrition Research and Practice
• /
• v.3 no.3
• /
• pp.212-219
• /
• 2009

This study was performed to investigate the association between hair mineral levels and nutrient intakes, age, and BMI in female adults who visited a woman's clinic located in Seoul. Dietary intakes were assessed by food frequency questionnaire and mineral levels were measured in collected hairs, and the relationship between these was examined. The average daily nutrient intakes of subjects were compared to those of the KDRIs, and the energy intake status was fair. The average intake of calcium in women of 50 years and over was 91.35% of KDRls and the potassium intake was greatly below the recommended levels in all age groups. In the average hair mineral contents in subjects, calcium and copper exceeded far more than the reference range while selenium was very low with 85.19% of subjects being lower than the reference value. In addition, the concentrations of sodium, potassium, iron, and manganese in the hair were below the reference ranges in over 15% of subjects. The concentrations of sodium, chromium, sulfur, and cadmium in the hair showed positive correlations (P < 0.05) with age, but the hair zinc level showed a negative correlation (P < 0.05) with age. The concentrations of sodium, potassium, chromium, and cadmium in the hair showed positive correlations (P < 0.05) with BMI. Some mineral levels in subjects of this study showed significant correlations with nutrient intakes, but it seems that the hair mineral content is not directly influenced by each mineral intake. As described above, some hair mineral levels in female adults deviated from the normal range, and it is considered that nutritional intervention to control the imbalance of mineral nutrition is required. Also, as some correlations were shown between hair mineral levels and age, BMI, and nutrient intakes, the possibility of utilizing hair mineral analysis for specific purposes in the future is suggested.