• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.717-726
• /
• 2009

Multivariate models were developed for the simultaneous spectrophotometric determination of copper (II), nickel (II) and zinc (II) in water with 1-(2-thiazolylazo)-2-naphthol as chromogenic reagent in the presence of Triton X-100. To overcome the drawback of spectral interferences, principal component regression (PCR) and partial least square (PLS) multivariate calibration approaches were applied. Performances were validated with several test sets, and their results were then compared. In general, no significant difference in analytical performance between PLS and PCR models. The root mean square error of prediction (RMSEP) using three components for $Cu^{2+}$, $Ni^{2+}$ and $Zn^{2+}$ were 0.018, 0.010, 0.011 ppm, respectively. Figures of merit such as sensitivity, analytical sensitivity, limit of detection (LOD) were also estimated. High reliability was achieved when the proposed procedure was applied to simultaneous determination of $Cu^{2+}$, $Ni^{2+}$ and $Zn^{2+}$ in synthetic mixture and tap water.

• Research in Plant Disease
• /
• v.15 no.1
• /
• pp.41-45
• /
• 2009

In order to study a relationship between soil nutrients and rice brown spot occurrence, paddy field soils, rice grains and straws collected from different paddy fields with different disease degrees of brown spots were analyzed for inorganic nutrients. Brown spot was prevalent in the rice grown in nutrient-deficient soils, which is especially low in macronutrient elements (phosphoric acid, potassium, silicic acids) and micronurients (calcium, magnesium). The soil, however, was high in sodium while organic nutrients and pH level were similar to others. The rice straws with severe brown spot were low in inorganics such as ferrous, copper, T-N, and $P_{2}O_{5}$ while the rice grains with brown spot were low in ferrous, MgO, Zn, and Mn. In the analysis of field type and nitrogen level, the highest disease severity was found in sandy-type field soil, followed by salty-type field soil and disease severity decreased as application level of nitrogen fertilizer increased. As a summary, the most important factor for effective brown spot control in rice is maintenance of proper nutrients in sandy-type field and control of sodium level in salty-type field soil.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.1
• /
• pp.132-138
• /
• 2020

Objective: To investigate the effects of low-dose trace mineral proteinates on reproductive performance, mineral status, milk immunoglobulin contents and fecal mineral excretion of sows. Methods: Eighty crossbred sows (Landrace×Large White) were randomly allocated to two groups in a 135-day trail, from breeding through 21 d postpartum. The two treatments were inorganic trace minerals (ITM): a basal diet+inorganic iron (Fe), copper (Cu), manganese (Mn), and zinc (Zn) at 90, 15, 25 and 90 mg/kg, respectively and organic trace minerals (OTM): a basal diet+proteinates of Fe, Cu, Mn, and Zn at 72, 12, 20, and 72 mg/kg, respectively. Results: Compared with ITM, OTM significantly increased (p<0.05) the number of piglets with birthweight >1 kg, the litter weaning weight, and milk Fe, Cu contents. No significant differences (p>0.05) were observed on sow hair mineral contents or immunoglobulin M (IgM), IgG, and IgA contents in colostrum and milk. In comparsion to ITM, OTM decreased fecal Fe, Cu, Mn, and Zn contents of gestating sows (p<0.01) and Fe, Mn, and Zn in lactating sows (p<0.01). Conclusion: These results indicate that low-dose mineral proteinates can increase the number of piglets with birthweight >1 kg, the litter weaning weight and certain milk mineral concentrations while reducing fecal mineral excretion.

• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.31-37
• /
• 2001

The metallurgical investigation of four lumps of bronze from the third building site of the northern workshop site at the Neungsan-ri temple site in Buyeo was performed. The microstructures of a section of sample was observed by SEM and qualitative and quantitative analysis of the sample was performed by EDS. The results are as follows: Sample 1 of the lump of bronze from northern workshop site in the third building site at Neungsan-ri temple site and sample 2 are speculated to be low-quality bronze resulting from refinery of matte which formed on the process of bronze refinery. Sample 3 is speculated as a lump of bronze which is one of Cu-Sn system and the one made by alloy only with pure bronze and tin on the process of bronze refinery. Sample 4 is confirmed as a lump of bronze which is one of Cu-Sn-Pb system from alloy of tin and lead into pure bronze. It is believed that the third building site at Neungsan-ri temple site in Buyeo produced bronze matte by refinery of copper ore or produced low-quality bronze by melting matte imported from outside.

• Journal of Life Science
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2008

Sulfur containing compounds in garlic have all be used as one of the traditional folk medicine as well as food source. The present study was performed to investigate the antioxidative compounds of 1-methyl-1-cysteine, dimethyl trisulfide and 2-vinyl-4H-1,3-dithiin. The antioxidative activity of sulfur containing compounds on human LDL was investigated by monitoring a thiobarbituric acid substances (TBARS). Sulfur containing compounds inhibited on oxidation of LDL mediated by $CuSO_4$ and macrophages in dose dependent manner with almost completely inhibition at $80{\mu}g/ml$. Antioxidant activities of sulfur containing compounds on LDL oxidation were 2-vinyl-4H-1,3-dithiin, 1-methyl-1-cysteine, and dimethyl trisulfide in order. Inhibitory effects of sulfur containing compounds on oxidation of LDL mediated by $CuSO_4$ and macrophages were degraded at much greater rate than native LDL, the LDL oxidation process was arrested as shown by the lower conjugated dienes formation at the concentration of $60{\mu}g/ml$. Sulfur containing compounds in garlic revealed at high antioxidative activity at low physiological concentration for human LDL oxidation in vitro specially, it was indicated that the antioxidative activity of 3-viny l-4H-1,2-dithiin was higher than that of the other sulfur containing compounds.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.511-521
• /
• 2000

Investigation was carried out lean burn de-NOx properties of Pt-$TiO_2$ bifunctional catalyst by propylene in order to get the high de-NOx activity and the wide temperature window under coexistence of $SO_2$ and $H_2O$. Only noncatalyst and carrier catalyst themselves had NOx conversion activity at high temperature over $400^{\circ}C$. NOx conversion activity of catalysts exchanged copper ion resulted in Cu-$TiO_2$>Cu-ZSM-5>Cu-$Al_2O_3$>CU-YZ>Cu-AZ. Catalysts impregnated with platinum based on titania gave the results of high NOx conversion activity at low temperature. $250^{\circ}C$. Bifunctional catalysts based on Pt-$TiO_2$ showed high NOx conversion activity both at a low zone of $300^{\circ}C$ and a high zone of $500^{\circ}C$. Pt-$TiO_2$/$Al_2O_3$ catalyst gave the highest NOx conversion activity at a low temperature zone. and Pt-$TiO_2$/$Mn_2O_3$(21) catalyst gave the highest NOx conversion activity at a high temperature zone. Under the coexistence of $SO_2$ and $H_2O$. NOx conversion activities of 0.55wt%Pt-$TiO_2$/5wt%Cu-ZSM-5 catalyst was high both at a low and high temperature zone, and increased depending on oxygen concentration. 0.55wt%Pt-$TiO_2$/5wt%Cu-ZSM-5 catalyst showed the best correlation between de-NOx activities and the propyl ere conversion rates to CO on the log function.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.556-561
• /
• 2016

This paper describes implementation of a 13.56 MHz, 5 kW RF high power generator for ISM band applications. This RF generator consists of four LDMOS modules of 1.25kW class-AB push-pull power amplifier with drive amplifier and its outputs are combined by using Wilkinson type transmission-line transformers. Its generator has a high efficiency and output power better than linearity. In order to discharge power transistor heats, we used on water cooled copper plate. Also, these have a composite circuit of combiner and low-pass filter and safety circuit to detector over and reflected power. The RF generator has achieved a efficiency of 79 % at 5.33 kW of saturated power level experimentally.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.183-191
• /
• 1991

A study was conducted to determine the influence of soil chemical properties on the distribution and forms of cadmium (Cd), lead (Pb), copper(Cu) and Zinc(Zn) in paddy soils near zinc mines. A sequential extraction procedure was used to fractionate the heavy metals in soils into the designated from of water soluble, exchangeable, organically bound, oxide/carbonate, and sulfide/residual. The predominant form of Cd, Pb, Cu and Zn in the soils was found to be sulfide/residual form. Oxide/carbonate Cd and Pb and organically bound Cu were high, while exchangeable Pb and Cu were very low. Water soluble Cd, Pb and Cu were not detected in the soils. The percentages of the heavy metals content in exchangeable fractions were inversely correlated with those in sulfide/residual fractions in the soils. Exchangeable Cd and Zn and the oxide/carbonate Pb were shifting to the sulfide/residual form with soil depth and the chemical forms of Cu were not changed. Organically bound Cu was positively correlated with soil organic matter content but Cd, Pb and Zn were not. The percentages of Cd, Pb and Zn content in exchangeable forms decreased with soil pH, while those in oxide/carbonate and sulfide/residual forms increased with soil pH. The amounts of oxide/carbonate and sulfide/residual forms of pb were higher than those of Cd and Zn at same soil pH.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.20-26
• /
• 2001

The deposition characteristics of MOCVO Cu using the (hfac)Cu(I) (1,5-DMCOD)(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato Cu(I) 1,5-dimethyl-cyclooctadine) as a precursor have been investigated in terms of the effects of hydrogen and H(hfac) ligand addition with He carrier gas. MOCVD Cu using a Helium carrier gas showed a low deposition rate (20~$125{\AA}/min$) at the substrate temperature range of 180~$230^{\circ}C$. Moreover, the Cu film deposited at 19$0^{\circ}C$ was very thin (~$700{\AA}$) and showed the lowest resistivity value of $2.8{\mu}{\Omega}-cm$. The deposition rate of MOCVD Cu using $H_2$or H(hfac) addition was significantly enhanced especially at the low temperature region (180~$190^{\circ}C$). Furthermore, thinner Cu films (~$500{\AA}$) provided low resistivity (3.6~$2.86{\mu}{\Omega}-cm$). From surface reflectance measurement, very thin films deposited by using different gas system revealed good surface morphology comparable with sputtered Cu film ($300^{\circ}C$, vacuum-anneal). Hence, Cu film using (hfac)Cu(1,5-DMCOD) as a precursor is expected as a good seed layer in the electrochemical deposition process for Cu metallization.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.114-119
• /
• 2019

We found metallic migration phenomena at the fire scene in Printed circuit board (PCB) of LED light equipment which are commonly used. Accordingly we did this study. In order to generate rapidly metallic migration, we experiment the water drop test under low voltage (3.0 V) and a small amount of water condition. As a results of our experiment, we saw the growth of metallic migration of Copper and checked directly short of the PCB between isolated two poles by Cu migration. Finally we saw the shape of dendrite pattern by Cu migration using Scanning electron microscope (SEM) and analyzed that components via Energy dispersive Spectrometer (EDS).