• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.639-646
• /
• 2000

Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season in Korea. However, since the heat efficiency of the heater is about 80%, considerable unused heat in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust gas heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The system consists of a heat exchanger made of copper pipes, ${\phi}\;12.7{\times}0.7t$ located inside the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tame The total heat exchanger area is $1.5m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to performance test it can recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690{\ell}$/hr from the waste heat discharged. The exhaust gas temperature left from the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{circ}C$ from $21^{circ}C$ at the water flow rate of $690{\ell}$/hr. And, the condensed water amount varies from 16 to $43m{\ell}$ at the same water circulation rates. This condensing heat recovery system can reduce boiler fuel consumption amount in a day by 34% according to the feasibility study of the actual mimitomato greenhouse. No combustion load was observed in the hot air heater.

• 자원리싸이클링
• /
• 제24권1호
• /
• pp.66-72
• /
• 2015

재활용을 위한 LCD TV 분해 시 영상 신호 송신, 전원 공급, 화상 구현 등을 위한 다양한 종류의 PCB가 발생한다. PCB에는 금이나 구리와 같은 유가금속이 다량 함유 되어 있으나 사용용도, PCB 패키징 방법에 따라 함유 되어 있는 유가금속의 종류와 함유량에 차이가 있다. 본 연구에서는 PCB 종류에 따른 구조 분석을 통하여 PCB에 함유 된 금과 구리의 함유량에 따라 PCB를 등급별로 분류 하고자 하였으며 금 회수 효율이 높은 PCB, 금 회수 효율이 낮은 PCB, 금이 함유되어 있지 않은 PCB 세 종류로 분류를 하였다. 또한 실제 LCD TV를 분해하여 발생된 PCB에 대한 함유량 분석을 통하여 PCB 내 금과 구리 함유량을 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.57-59
• /
• 2006

In this study, we experimented a deterioration characteristics by series arcing with 600V polyvinyl chloride insulation wire and analyzed the glowing/growing process of copper oxide, waveforms of contact voltage, current, power dissipation and carbonized patterns of insulation. We know that how glowing contacts and surface arcing can decompose PVC insulation and that it is possible for the subsequent series arc to ignite, and burn insulation. We expect that these results are useful for advancing the state-of-the-art in fire protection by Providing a better understanding of how electrical fires can initiate.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.562-564
• /
• 2005

This paper presents the reasonable design parameters of a SRM for hybrid electric vehicle driving. For the design of SRM, the initial model is designed using the equivalent magnetic circuit method. In order to optimize the SRM for HEV. The initial model is redesigned by FEM with the variation of the stock length and turns of winding. This paper shows that a flat-topped current of a phase can be made from a change of the stack length and the number of turns for high efficiency, high average torque and a lower torque ripple. The change of current falling time as a variation of turn-off angle was shown by FEA. The iron loss and copper loss were described. The torque of the redesigned motor is suitable for low and high speed ranges to drive a HEV that was verified by the speed-torque curve.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.213-214
• /
• 2010

The Arc fault is primary reason of electric fire. so we must detect. the purpose of this study is to extend our knowledge of AC-arc characteristics and detect. The Arcs are produced by separating two electrodes made with graphite and copper. A very low separation speed allows arcs to reinitiate, as in arc fault in wires. Power is 220Vrms-60Hz and the load is light bulbs and capacities are 220W, 660W and 1100W. I measured Arc voltage and current. and defined voltage and current Max level, voltage plateau and Arc-power at each cycle.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.78-84
• /
• 2016

This paper is focused on the measurement and analysis of an atmospheric electric field which is caused by thunderclouds. The electric field due to thunderclouds changes very slowly. For this reason, the extremely low frequency E-field sensor needs to be used for measuring the atmospheric electric field strength. The balloon-carried E-field sensor system with the time constant of 1sec was designed and fabricated. The electric field sensor consists of $100mm{\times}100mm$ copper plate, active integrator, high pass and low pass filters and batteries. The measurements of atmospheric electric fields were made by the balloon-carried E-field sensor and radiosonde, which sends the data back to ground in real time. From the calibration experiments, the response sensitivity of the E-field sensor was 0.154mV/kV/m in the frequency range of less than 1kHz. As a result from the actual experiment of the atmospheric electric field, the electric field signals were observed from the altitude of about 2.5km. Also, as the altitude was increased, the detected electric field wave oscillated with the fluctuation of sensing plate. The proposed method seems suitable for measurements of atmospheric electric fields, because it is inexpensive, simple to use and launch.

• Journal of Microbiology and Biotechnology
• /
• 제25권1호
• /
• pp.127-136
• /
• 2015

Cupredoxin-like proteins are mainly copper-binding proteins that conserve a typical rigid Greek-key arrangement consisting of an eight-stranded β-sandwich, even though they share as little as 10-15% sequence similarity. The electron transport function of the Cupredoxins is critical for respiration and photosynthesis, and the proteins have therapeutic potential. Despite their crucial biological functions, the identification of the distant Cupredoxin homologs has been a difficult task due to their low sequence identity. In this study, the overlapped conserved residue (OCR) fingerprint for the Cupredoxin superfamily, which consists of conserved residues in three aspects (i.e., the sequence, structure, and intramolecular interaction), was used to detect the novel Cupredoxin homologs in the NCBI non-redundant protein sequence database. The OCR fingerprint could identify 54 potential Cupredoxin sequences, which were validated by scanning them against the conserved Cupredoxin motif near the Cu-binding site. This study also attempted to model the 3D structures and to predict the functions of the identified potential Cupredoxins. This study suggests that the OCR-based approach can be used efficiently to detect novel homologous proteins with low sequence identity, such as Cupredoxins.

• 동의생리병리학회지
• /
• 제22권5호
• /
• pp.1309-1314
• /
• 2008

This study was undertaken to elucidate the antioxidant activity of the ethanol (EEPB) and water (WEPB) extracts of Prunus persica branches. The extracts contained a high phenolic content and revealed a potent hydrogen donating activity in DPPH scavenging assay. Compared to $\alpha$-tocopherol, EEPB (p < 0.001) and WEPB (p < 0.05) significantly inhibited $FeCl_2$-ascorbic acid-induced lipid peroxidation, and also exhibited potent antiradical activities against hydroxyl radical, superoxide anion, nitric oxide and peroxynitrite. In copper- and AAPH-mediated human low-density lipoprotein (LDL) oxidation systems, the extracts demonstrated a strong antioxidant function by metal chelating, rather than direct scavenging, action. Furthermore, EEPB at 5 ${\mu}g/mL$ concentration showed 80.77% inhibition of the electrophoretic mobility of LDL, compared to 77.69% for ascorbic acid and 76.92% for BHT. These results suggest that PB branch extracts may protect against oxidative stress-induced diseases.

• 한국식품영양과학회지
• /
• 제24권3호
• /
• pp.362-370
• /
• 1995

Human plasma low density lipoprotein(LDL) is the main carrier for cholesterol, and recent studies suggest the normal LDL can be readily oxidized by free radical and not interact with LDL receptor. Lipoprotein pariticles are consisted of lipid andprotein, and fatty acids of lipoproteins are prone to oxidation. LDL particles readily undergo oxidative modification by copper. From the results, oxidized LDL altered its biological properties. A marked increase in the electrophoretic mobility of LDl on agarose gel indicated that negative surface charge of the LDL particles was increased. Also, the results from the HPLC showed that oxidized LDL was degraded into several polypeptides nonenzymatically. Degradation tests which measured the amount of 5-IAF labelled oxidized LDL were carried out by monocyte and hepatocyte cell culture. Hepatocyte cell culture of modified LDL did not show consistent pattern. However, binding rate of modified LDL with HMDM(human monocyte derived macrophage) was enhanced with oxidation, but was retarded by addition of antioxidants(hyaluronic acid, vitamin A, vitamin E). Also comparisons of oxidized-LDL, acetyl-LDL and MDA-LDL showed significant differences in the chemical properteis and binding affinity to HMDM. Thus, modificaition of normal LDL altered its biological properties.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.75-84
• /
• 2005

본 연구는 해양구조물로 재활용되는 제강 슬래그의 납, 구리, 카드뮴과 수은의 용출특성을 평가하는데 있다. 이를 위하여 고형폐기물의 용출규제 시험, 액고비 변화시험, pH 고정시험과 같은 다양한 용출시험을 하였다. 용출용매로 증류수를 이용한 경우와 해수를 이용한 경우의 pH 고정시험 결과, 제강슬래그에서 용출된 납, 구리, 카드뮴은 뚜렷한 차이를 확인할 수 있었다. 용출용매로 증류수 사용시, pH 7-8 구간과 pH 11-12 구간에서 낮은 용출을 보였지만, 해수를 용출용매로 사용한 경우는, 증류수를 용매로 사용한 것 보다 높게 용출되었다. 수은 용출의 경우는 증류수를 용출용매로 이용한 것보다 해수를 이용한 경우에서 더 낮게 용출되었다. 한편, 제강 슬래그에서 용출되는 납, 구리, 카드뮴의 용존 및 침전 상태의 파악과 중금속 화합물들의 파악을 위하여 지화학 평형 프로그램인 Visual minteq를 사용하였다. 해수와 반응한 제강 슬래그에서 용출된 납, 구리는 pH 11-12 구간에서 대부분 용존되지만 pH가 감소되는 pH 7-10에서는 90% 이상만이 침전하였고, 카드뮴의 경우는 100% 용존상태로 존재하였다. 증류수와 반응한 제강 슬래그에서 용출된 납은 해수의 경우도 유사하였고, 구리와 카드뮴은 100% 용존상태로 존재하였다. 해수 내의 $Cl^-,\;CO_3^{-2},\;SO_4^{-2}$와 결합한 납화합물은 $PbCl^+,\;PbSO_4$로 이루어졌으며, 구리화합물은 $CuSO_4,\;CuCO_3$, 카드뮴화합물은 $CdCl^+,\;CdSO_4$ 등이 형성되었다. 수은의 경우는 해수 및 증류수를 용출용매로 이용한 모든 경우에서 납, 구리, 카드뮴과는 달리 대부분 침전하였다. 더욱이 해수에 존재하는 고농도 염소($Cl^-$)와의 수착으로 인해 finite solid인 calomel($Hg_2Cl_2$)이 형성되어 대부분 침전(SI=0)되기 때문에 납, 구리, 카드뮴 보다 더 낮은 환경이동성을 갖을 것으로 사료된다. 상기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.