• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.294-301
• /
• 2013

Polymersomes made of biodegradable triblock copolymers based on poly(fumaric acid-co-sebacoyl chloride)/PEG (PEG-co-P(FA/SC)-co-PEG) were prepared and studied in aqueous solutions. TEM confirmed the formation of vesicles in aqueous media. Aggregation behavior of the copolymers was studied by fluorescence spectroscopy of 8-anilino-1-naphthalenesulfonic acid, and the critical aggregation concentration (c.a.c.) of the copolymer was found to be ${\sim}26.2{\mu}M$ indicating desirable stability of the vesicles. Dynamic light scattering revealed that the size of the vesicles was distributed within the range of 170-270 nm. Turbidity measurements confirmed the relative short-term stability of the polymersomes. Carboxyfluorescein, a hydrophilic compound, was simply encapsulated in the vesicles during polymersome preparation. The release of encapsulant from the polymersomes at 25 and $37^{\circ}C$ lasted about 3 weeks, and the rate of release followed a first-order kinetics. The release is speculated to be primarily carried out through diffusion. These results confirm that these polymersomes are promising as controlled-release carriers of various drugs.

• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.841-849
• /
• 2015

The solid phase extractant SAN-D2EHPA/TBP containing two extractants of Di-(2-ethylhexyl)phosphoric acid (D2EHPA) and Tri-butyl-phosphate (TBP) was prepared by immobilizing two exractants D2EHPA and TBP in styrene acrylonitrile copolymer (SAN). The prepared SAN-D2EHPA/TBP was characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The solid phase extractant SAN-D2EHPA/TBP was tested for the removal of Cu(II) from aqueous solution. Experiments were carried out as a function of the pH and Cu(II) concentration in the aqueous phase. The equilibrium time was 180 min and equilibrium experiment data obeyed the pseudo-second-order kinetic model. The Langmuir isotherm model represented the experiment data as well. The maximum removal capacity of Cu(II) calculated from Langmuir isotherm model was 3.1 mg/g.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.646-650
• /
• 2009

We report the fabrication of pentacene organic field-effect transistors (OFETs) using a fluorinated styrene-alt-maleic anhydride copolymer gate dielectric, which was prepared from styrene derivatives with a fluorinated side chain [$-CH_2-O-(CH_2)_2-(CF_2)_5CF_3$] and maleic anhydride through a solution polymerization technique. The fluorinated side chain was used to impart hydrophobicity to the surface of the gate dielectric and maleic anhydride was employed to improve its wetting properties. A field-effect mobility of 0.12 cm$^2$/Vs was obtained from the as-prepared top-contact pentacene FETs. Since various functional groups can be introduced into the copolymer due to the nature of maleic anhydride, its physical properties can be manipulated easily. Using this type of copolymer, the performance of organic FETs can be enhanced through optimization of the interfacial properties between the gate dielectric and organic semiconductor.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.446-456
• /
• 2008

A recent theoretical approach based on the coupling of both the Flory-Huggins (FH) and the Association Equilibria thermodynamic (AET) theories was modified and adapted to study the miscibility properties of a multi-component system formed by two polymers (a proton-donor and a proton-acceptor) and a proton-acceptor solvent, named copolymer(A)/solvent(B)/polymer(C). Compatibility between polymers was mainly attained by hydrogen-bonding between the hydroxyl group on the phenol unit of the poly(styrene-co-vinyl phenol) (PSVPh) and the carbonyl group of the biodegradable and environmentally friendly poly(3-hydroxybutyrate) (PHB). However, the self-association of PSVPh and specific interactions between the PSVPh and the H-acceptor group (an ether oxygen atom) of the epichlorohydrin (ECH) solvent were also established in a lower extension, which competed with the polymer-polymer association. All the binary specific interactions and their dependence with the system composition as well as with the copolymer content were evaluated and quantified by means of two excess functions of the Gibbs tree energy, ${\Delta}g_{AB}$ and ${\Delta}g_{AC}$. Experimental results from fluorescence spectroscopy were consistent with the theoretical simulations derived with the model, which could also be applied and extended to predict the miscibility in solution of any polymer blend with specific interactions.

• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.371-376
• /
• 2008

Poly(ethylene-co-vinylacetate) (EVA) microspheres were prepared by thermally induced phase separation (TIPS) in toluene. The microsphere formation occurred by the nucleation and growth mechanism in metastable region. The effects of the concentration and component of the polymer and cooling rate on microsphere formation were investigated. The microsphere formation and growth were followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by particle size analyzer, became broader when the polymer concentration was higher, the content of vinyl acetate in EVA copolymer was higher, the cooling rate of EVA copolymer solution were lower. The content of disperse dye in EVA microsphere was obtained by TGA thermal analysis, the dye content of EVA15 and EVA18 were 3.5 and 2.0 wt% respectively.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.515-519
• /
• 2009

Biodegradable poly((R)-3-hydroxy butyrate) and poly(ethylene glycol) was conjugated to make amphiphilic di-block copolymer. Folate was conjugated at di-block copolymer to target the cancer cells. Copolymer was ready to form the self-assembled micelle whose size was 125~156 nm in aqueous solution. Griseofulvin as a hydrophobic drug was loaded in nanoparticles. Their loading efficiencies were 35~56%. Hydrophobic drug was continuously released for 24 h. Cell viability test showed that folate attached particles were 10% more efficient than the particles without targeting ligands.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.55-60
• /
• 2006

Thermally stable and solution-processable poly(N-arylcarbazole-alt-aniline) copolymers with high structural integrity were synthesized in good yields via palladium-catalyzed polycondensation of aniline with corresponding N-arylcarbazole monomers such as N-(2-ethylhexyloxyphenyl)-3,6-dibromocarbazole,bis[6-bromo-N-(2-ethylhexyloxyphenyl)carbazole-3-yl] and N-(4-(2-ethylhexyl)-3,5-dibromomethylene-phenyl) carbazole, respectively. The optical and electrochemical properties of these copolymers were measured and compared with those of poly(N-alkylcarbazole-alt-aniline) copolymer. All synthesized poly(N-arylcarbazole-alt-aniline) copolymers showed maximum UV-Vis absorption peaks at around 300 nm in THF solution, and exhibited maximum photoluminescence peaks in the blue emission range from 430 to 460 nm. It was also found that poly(N-arylcarbazole-alt-aniline) copolymers had wider band gap energy than poly(N-alkylcarbazole-alt-aniline) copolymer.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.27-37
• /
• 2022

In this study, a study and interpretation of the spinning process in copolymerized aramid spinning was conducted. In order to proceed with the spinning process modeling and analysis, the spinning process was modeled through the physical property modeling of the spinning solution and the structural modeling of the spinneret, and structural stability and flow of the spinneret for this spinning were analyzed. After modeling the spinning solution and the spinneret in a virtual space, the pack pressure and flow rate when the spinning solution was discharged were simulated. Macroscopically, the structural stability of the spinneret was confirmed at the standard pack pressure (100 kg·f/cm²), and microscopically, the flow rate and pressure drop data of the spinning solution according to the L/D(Length (L)/Diameter (D)) value were analyzed. Based on the research and development of virtual engineering modeling and analysis, we present the possibility of changing the shape and mechanical properties of copolymer aramid fibers according to the spinning process.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.729-733
• /
• 2009

Solution casting films of sulfonated poly[styrene-b-(ethylene-r-butylene)-b-styrene] copolymer (sSEBS)-based composite membranes that contained different amounts of organic, nanorod-shaped polyrotaxane were annealed at various temperatures for 1 h. The films' properties were characterized with respect to their use as polymer electrolyte membranes in direct methanol fuel cells (DMFCs). Different aspect ratios of polyrotaxane were prepared using the inclusion-complex reaction between $\alpha$-cyclodextrin and poly(ethylene glycol). The presence of the organic polyrotaxane inside the membrane changed the morphology during the membrane preparation and reduced the transport of methanol. The conductivity and methanol permeability of the composite membranes decreased with increasing polyrotaxane content, while the annealing temperature increased. All of the sSEBS-based, polyrotaxane composite membranes annealed at $140^{\circ}C$ showed a higher selectivity parameter, suggesting their potential usage for DMFCs.