• Journal of Biomedical Engineering Research
• /
• 제12권1호
• /
• pp.57-62
• /
• 1991

ABA type block copolymers composed of poly($\gamma-benzyl$ L-glutamate) (PBLG) as the A component and poly (ethylene glycol) as the B component were obtained by polymerization of $\gamma-benzyl$ L-gletamate N -carboxyanhydride, initiated by amino groups at both ends of poly(ethylene glycol) . From circular dichroism measurements in ethylene dichloride solution as well as from infrared spectTa measurements in solid state, it was found that the polypep- tide block exists in the a-helical conformation, as in PBLG homopolymer. $Poly-N^5$ (3-hydroxypropyl glutamine) (PHPG)/poly(ethylene glycol)block copolymer hydrogel was obtained by the treatment of PBLG/PBG block copolymer with the mixture of 3-ammine-1-propanol and diamlnooctane. The water content of PHPG/PEG block copolymer hydrogel was about 80wt% when the concentration of crosslinking agent was below 5 mole % per polymer.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.278-281
• /
• 2002

We investigated the photoluminescence (PL) characteristics of a highly soluble, fullerene-containing copolymer in both solution and film states. In solution state, the copolymer showed different PL characteristics depending on the aromaticity of the solvent. The PL from polystyrene segments of the copolymer was strongly quenched in an aromatic solvent, while the PL from fullerene remained unchanged. However, the films cast from an aromatic and a nonaromatic solvent demonstrated very similar PL characteristics, implying that the chain alignment or orientation and packing in the films occur in a similar way irrespective of the solvent.

• Polymer(Korea)
• /
• 제24권6호
• /
• pp.854-859
• /
• 2000

The synthesis of poly(N,N-dimethylamino ethyl methacrylate (DMAEMA)-block-poly(ethylene glycol) (PEG)) copolymer has been carried out and the block copolymer was characterized by FT-IR, DSC, and $^1$H-NMR. The formation of polymeric nanoaggregation was observed in the solution mixture of poly(DMAEMA) -block-PEG copolymer and poly (ethyl acrylamide) (EAAm) due to the intermolecular interaction via hydrogen bond between DMAEMA and poly(EAAm). The formation of polymeric nanoaggregation was observed above critical micelle concentration (CMC).

• Macromolecular Research
• /
• 제16권1호
• /
• pp.62-65
• /
• 2008

The morphology of the $D_2O$-induced reverse micellar structure of an amphiphilic block copolymer of poly( ethylene oxide )-b-poly(propylene oxide )-b-poly( ethylene oxide )($EO_{76}PO_{29}EO_{76}$) was investigated in hydrophobic media by small angle neutron scattering (SANS). Increasing $D_2O$ in the styrene/divinylbenzene solution of $EO_{76}PO_{29}EO_{76}$ led to a change in morphology of the reverse micelles from a short range ordered molecular aggregate to a hexagonally arranged micelle, and further to a spherical micelle.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.348-353
• /
• 2006

For enhancing the gene delivery efficiency of polyplexes, a new formulation was developed using PEI conjugated Pluronic F127 copolymer as an effective additive. Low molecular weight, branched polyethylenimine Mw 600 (LMW BPEI 600) was conjugated to the terminal end of Pluronic F127. The PEI-modified Pluronic copolymers formed a micellar structure in aqueous solution, similar to that of unmodified Pluronic copolymer. PEI modification of Pluronic copolymer increased the size of micelles while concomitantly raising the critical micelle concentration (CMC). The PEI-modified Pluronic copolymer was used as a micellar additive to enhance the gene transfection efficiency of pre-formulated polyelectrolyte complex nanoparticles composed of luciferase plasmid DNA and branched PEI Mw 25k (BPEI 25k) or polylysine Mw 39k (PLL 39k). The luciferase gene expression levels were significantly enhanced by the addition of the BPEI-modified Pluronic copolymer for the two formulations of BPEl and PLL polyplexes. The results indicated that the BPEI-modified Pluronic copolymer micelles ionically interacted on the surface of DNA/BPEI (PLL) polyplexes which might facilitate cellular uptake process.

• Applied Chemistry for Engineering
• /
• 제9권2호
• /
• pp.294-299
• /
• 1998

To prove pseudo-homopolymerization(PHP) method indirectly for general system which includes more than one growing radicals per particle, Mayo-Lewis equation of bulk copolymer system was derived form probability equation about instantaneous copolymer composition of emulsion copolymer system during interval II. From Extended Smith-Ewart equation proposed by Ballard et al. in emulsion copolymerization, exact solution was obtained for 0-1 system (i.e., the system containing no more than one growing radical per particle). From the exact solution, average number of radicals per particle and instantaneous copolymer composition were predicted to reach the steady state which a few minutes. So the reliability of this approximation method could by proved directly for 0-1 system. Styrene-butadiene(St-Bu) and Styrene-methyl methacrylate (St-MMA) system were used for model calculations.

• Journal of the Korean Ceramic Society
• /
• 제34권9호
• /
• pp.993-1001
• /
• 1997

The (0.8PPV+0.2DMPPV) copolymer and silica/borosilicate composites were synthesized by sol-gel process. The organic-inorganic hybrid solution was prepared by using of (0.8PPV+0.2DMPPV) copolymer precursor solution as a raw material for organic components and TEOS and TMB for glass components. Then by drying the solution in vacuum at 5$0^{\circ}C$ for 7days and subsequent heat treatment in vacuum at 15$0^{\circ}C$~30$0^{\circ}C$ for 2h~72h with heating rate of 0.2$^{\circ}C$/min and 1.8$^{\circ}C$/min, the organic-inorganic composites were synthesized. Microstructural evolution of the composites was characterized by DSC, IR spectrocopy, UV/VIS spectroscopy, and TEM. Elimination of the polymer precursor and degradation of the polymer were observed by DSC and Si-O and trans C=C absorption peaks were identified by IR spectra. The polymer was found to be successfully incorporated into the glass matrix and it was confirmed by the absorption peaks from the polymer in the UV/VIS spectra and the TEM results. The absorption peak of the composites was found to shift toward short wavelength side compared to that of the pure polymer and the amount of the blue shift increased with increasing the heat treatment temperature and heat treatment time and with decreasing the heating rate.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.656-661
• /
• 2007

The effects of a neutral solvent of dioctyl phthalate (DOP) on the phase behavior of symmetric polystyrene-block-poly(n-butyl methacrylate) copolymers (PS-b-PnBMA) were assessed herein. Closed-loop phase behavior with a lower disorder-to-order transition (LDOT) and an upper order-to-disorder transition (UODT) was observed for PS-b-PnBMA/DOP solution when the quantity of DOP was carefully controlled. When the molecular weight of PS-b-PnBMA became larger, the LDOT did not appreciably change at smaller quantities of DOP. With larger quantities of DOP, the reduction in the UODT is greater than the increase in the LDOT. This behavior is discussed in accordance with a molecular theory predicated on a compressible random-phase approximation.

• Korean Membrane Journal
• /
• 제10권1호
• /
• pp.20-25
• /
• 2008

Proton conducting composite membranes were prepared by solution blending of poly(vinylidene fluoride-co-chlorotrifluoroethylene)-graft-poly(sulfopropyl methacrylate) (P(VDF-CTFE)-g-PSPMA) graft copolymer and heteropolyacid (HPA). The P(VDF-CTFE)-g-PSPMA graft copolymer was synthesized by atom transfer radical polymerization (ATRP) using direct initiation of the secondary chlorines of P(VDF-CTFE). FT-IR spectroscopy revealed that HPA nanoparticles were incorporated into the graft copolymer via hydrogen bonding interactions. The water uptake of membranes continuously decreased with increasing HP A concentration up to 45wt%, after which it slightly increased. It is presumably due to the decrease in number of water absorption sites due to hydrogen bonding interaction between the HP A particles and the polymer matrix. The proton conductivity of membranes increased with increasing HPA concentration up to 45wt%, resulting from both the intrinsic conductivity of HP A particles and the enhanced acidity of the sulfonic acid of the graft copolymer.

• Journal of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.73-79
• /
• 1980

N-Vinylurea(VU) was radically copolymerized with vinyl acetate (VAc). VU-vinyl alcohol (VA) copolymer, which is a water-soluble polymer with pendent urea and hydroxyl groups, was synthesized by the methanolysis of the VU-VAc copolymer.VU shows vinyl polymerization, and this result is in agreement with that of Nozakura, et al. Huggins constant for the aqueous solution of the VU-VA copolymer containing more than about 30 mole percent of VU was observed to be a high value.