• 폴리머
• /
• 제24권6호
• /
• pp.787-793
• /
• 2000

분자량과 methylacrylate 함량이 다른 아크릴로니트릴 공중합체의 dimethylformamide (DMF) 농후용액의 겔화 거동 및 임계 겔농도 (c＊)를 조사하였다. 중합체 종류에 관계없이 저온에서 장시간 방치할 경우 방치시간에 따라 점도가 급격히 증가하여 겔화가 진행됨을 알았으며, 중합체의 분자량이 클수록, 방치온도가 낮을수록 그리고 공중합체 중 아크릴로니트릴 성분비가 증가할수록 겔화 진행속도가 증가하였고, 임계 겔농도는 감소하였다. 동적 점탄성 실험에서 겔 용액으로부터 얻은 필름은 진 용액으로부터 얻은 필름과 달리 두 개의 유리전이 영역을 나타내었다. 이러한 결과는 겔화과정에서 atactic 중합체중 입체 규칙적인 block들간의 쌍극자-쌍극자 상호작용에 의한 ordered junction zone의 존재를 강하게 시사하였다.

• Macromolecular Research
• /
• 제9권3호
• /
• pp.150-156
• /
• 2001

Polystyrenes(PS) were grafted onto polypropylene(PP) in the PP solution by ultrasonic irradiation-initiated polymerization of styrene. The resulting products consisted of mixtures of homopolymers and PP-PS copolymer because of the homopolymerization of styrene itself and copolymerization with PP. The dependency of the designated polymerization on sonication times was investigated to monitor the evolution lion of the copolymerization. Formation of the PP-PS copolymer was confirmed by FTIR analysis of the reaction products after a proper separation procedure of free PS and PP-PS copolymer. It was found that the tendency for the formation of PP-PS copolymer was closely related with the phase behavior of the PP/styrene mixture which was also influenced by sonication time. In order to verify the effectiveness of the PP-PS copolymer as a compatibilizer for PP/PS blend, melt mixing of PP/PS/PP-PS was performed in a batch mixer. During the mixing, the average torque was higher for the blend containing PP-PS copolymer influencing compatibilization. In accordance with the results from FRIR analysis and torque measurement, the PS domain size remarkably decreased in the PP/PS/PP-PS blend.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2616-2622
• /
• 2013

A novel zwitterionic monomer 3-[(2-acrylamido)dimethylammonio]propanesulfonate (DMADAS) was designed and synthesized in this study. Then it was polymerized with acrylamide (AM) by free radical polymerization in 0.5 mol/L NaCl solution with ammonium persulfate ($(NH_4)_2S_2O_8$) and sodium sulfate ($NaHSO_3$) as initiator. The structure and composition of DMADAS and acrylamide-3-[(2-acrylamido)-dimethylammonio]propanesulfonate copolymer (P-AM-DMADAS) were characterized by FT-IR spectroscopy, $^1H$ NMR and elemental analyses. Isoelectric point (IEP) of P-AM-DMADAS was tested by nanoparticle size and potential analyzer. Solution properties of copolymer were studied by reduced viscosity. Antipolyelectrolyte behavior was observed and was found to be enhanced with increasing DMADAS content in copolymer. The results showed that the viscosity of P-AM-DMADAS is 5.472 dl/g in pure water. Electrolyte was added, which weakened the mutual attraction between sulfonic acid group and quaternary ammonium group. The conformation became loose, which led to the increase of reduced viscosity. The ability of monovalent and divalent cation influencing the viscosity of zwitterionic copolymer obeyed the following sequence: $Li^+$ < $Na^+$ < $K^+$, $Mg^{2+}$ < $Ca^{2+}$ < $Ba^{2+}$, and that of anion is in the order: $Cl^-$ < $Br^-$ < $I^-$, $CO{_3}^{2-}$ > $SO{_3}^{2-}{\approx}SO{_4}^{2-}$.

• 폴리머
• /
• 제26권2호
• /
• pp.174-178
• /
• 2002

조성비가 서로 다른 각종의 PLLA-POE-PLLA와 PDLA-POE-PDLA블록공중합체의 합성을 실시하여 모든 공중합체를 고수율이며 다분산도가 현저하게 작은 생성물을 얻었으며, 그 결과 체온 부근인 $37^{\circ}C$에서는 0.1 g/mL PLLA-POE-PLLA 분산액과 0.1 g/mL PDLA-POE-PDLA의 혼합분산액에서 겔의 형성이 관찰되었다. 또한 PLLA-POE-PLLA분산액과 비교하여 PLLA-POE-PLLA분산액과 PDLA-POE-PDLA분산액을 혼합한 분산액의 흐림점이 높아지는 것을 확인하였으며 고농도일수록 흐림점이 낮아지는 현상도 확인되었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.407-414
• /
• 2014

Polyacrylonitrile (PAN) copolymers with different methyl acrylate (MA) contents were synthesized via solution polymerization and used as precursors for high-performance PAN ultrafine fibrids. The chemical structures of the copolymers were characterized using Fourier-transform infrared spectroscopy and $^{13}C$ nuclear magnetic resonance spectroscopy. Their particle sizes and aspect ratios increased with increasing viscosity, and the degree of crystallinity increased with decreasing concentration of copolymer solution. In contrast, their peak temperature and heat of exotherm increased with decreasing concentration of the copolymer solution. The aromatization indices (AIs) of the fibrids increased with increasing heat-treatment time; however, the AIs decreased when the heat-treatment temperature was higher than the onset temperature of the copolymers. On the other hand, the crystal sizes of the fibrids decreased with increasing concentration of the copolymer solution when the MA content was held constant.

• 한국응용과학기술학회지
• /
• 제18권2호
• /
• pp.118-126
• /
• 2001

Micelle formation and adsorption at the $Ti0_{2}$ interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous $Ti0_{2}$ dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the $I_{1}/I_{3}$ ratio, as the copolymer concentration increase; $I_{1}$ and $I_{3}$ are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of $TiO_{2}$ particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

• 설비공학논문집
• /
• 제13권3호
• /
• pp.194-199
• /
• 2001

The turbulent flow resistance of water solution with polymer is reduced as compared with that of pure water. This effects is named th drag reduction and offers the significant reduction of the pumping power and the energy consumption. But the intense shear forces and the high temperature experienced by the polymer solution when passing through the pipes cause the degradation a loss of drag reduction effectiveness. Especially, the degradation behavior is found to be strongly dependent on temperature. This mechanical and thermal degradation can be avoided by adding materials such as surfactant to the polymer solution, which enhance the bonding force between molecules. In the present study, Copolymer and SDS were utilized and they were mixed in 10 different mixture ratios, while total concentration was fixed as 100wppm. Degradation of Copolymer-SDS mixture solutions was investigated experimentally in closed loop at the temperature of $10^{\circ}C\; and\; 80^{\circ}C$ with various flow average velocities of 1.5 m/sec, 3.0m/sec, and 4.5m/sec. Degradation characteristics of polymer solution without surfactant show a radical loss of drag reduction effectiveness at high temperature. Degradation alleviation ability of surfactant is especially effective at high temperature. Consequently, this results show that the addition of surfactant to the polymer solution can control unfavorable degradation phenomena for high temperature systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.844-846
• /
• 2008

A new p-type conjugated copolymer, poly(9,10-diethynylanthracene-alt-9,9-didodecylfluorene (PDADF) was synthesized through a Sonogashira coupling reaction. A solution-processed thin film transistor device showed a carrier mobility value of $6.0\;{\times}\;10^{-4}\;cm^2/Vs$ with a threshold voltage of -17 V and a capacitance ($C_i$) of $10\;nF/cm^2$.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.81-82
• /
• 2006

In this study, the applications of the block copolymer thin films are introduced. For this purpose, we first obtained cylindrical nanodomains in polystyrene-block-poly(methyl methacrylate) copolymer perpendicularly oriented to a substrate. Then, nanoporous templates were prepared after removing the PMMA nanodomains by UV treatment. By using electropolymerization, high density nanowire arrays of conducting polymer of poly(pyrrole) and poly( 3-hexyl thiopene) were obtained and their electric properties were measured. Also, these nanoporous thin films were found to be very useful for the separation of human Rhinovirus type 14 (HRV 14), major pathogen of a common cold in humans, from the buffer solution.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.73-74
• /
• 1998

1. Introduction : We have researched to separate water effectively from aqueous pyridine solution. In our previous papers, we have proposed new separation mechanism, in-situ complex, which is different from solution-diffusion and accelerated transport by hydrogen bonding. We have adopted in-situ complex mechanism to membranes containing phosphoric acids as well as acrylic acid and sulfonic acid in copolymer for dehydration of pyridine.