• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.1
• /
• pp.19-27
• /
• 2022

A series of QPAE/TiO₂-x (x = 1, 4, 7 and 10 wt%) organic/inorganic composite membranes were prepared as electrolyte membranes for alkaline anion exchange membrane fuel cells by controlling the content of inorganic filler with quaternized poly(arylene ether) (QPAE) random copolymer. Among the prepared QPAE/TiO₂-x organic/inorganic composite membranes, the highest ionic conductivity was 26.6 mS cm^-1 at 30℃ in QPAE/TiO₂-7 composite membrane, which was improvement over the ionic conductivity value of 6.4 mS cm^-1 (at 30℃) of the pristine QPAE membrane. Furthermore, the water uptake, swelling ratio, ionic exchange capacity, and thermal property of QPAE/TiO₂-x composite membranes were improved compared to the pristine QPAE membrane. The results of these studies suggest that the fabricated QPAE/TiO₂-x composite membranes have good prospects for alkaline anion exchange membrane fuel cell applications.

• Elastomers and Composites
• /
• v.36 no.1
• /
• pp.22-29
• /
• 2001

For a purpose of recycling of waste tires, composites of 10-60wt% recycled tire crumb blended with high density polyethylene(HDPE) were prepared, and their mechanical properties such as tensile strength, elongation at break, tensile modulus and impact strength were investigated as a function of tire crumb content. Ethylene-acrylic acid(EAA) copolymer was introduced by 10phr as a compatibilizer and the mechanical properties of the composites were measured. For the blend composition of 40wt% tire crumb content showing improved impact strength, the mechanical properties were measured by varying the EAA content of 5-15phr. All blends, whether modified or unmodified, showed a gradual improvement in impact strength as the tire crumb content increased, but the other properties decreased compared with the pure HDPE. In particular, the addition of EAA copolymer to the tire crumb content over 30wt% showed substantial improvement in impact strength. There was no significant effect of tire crumb size on impact strength of the composites.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.287-291
• /
• 1987

The composite mole fraction of monomers in PVA-PVFAc copolymer could be calculated from the analysis of trifluoroacetyl group by the pyrolysis gas chromatography without breaking of C-F bonds in polymer. A linearity between trifluoroacetyl peak areas in pyrogram and sample weights was obtained within the range below 3mg. The data of trifluoroacetyl contents derived from gas chromatogram of copolymers with various D.S. were in good agreement with results by the Specific Ionmeter.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.93-98
• /
• 2016

The composites of EVA/EPDM including aluminum trioxide (ATH) as a fire retardant were manufactured for the purpose of improving low temperature property and flame resistance in the rubbery materials. The ratio of EVA to EPDM didn't affect the flame resistance of the rubber composites. The addition of ATH resulted in increase of the flame resistance. In the evaluation of the cold resistance, the increasing EPDM content showed enhancement of cold resistance in the composites due to increasing low Tg EPDM. It was found out that tensile strengths of the composites showed a maximum value at 100 phr of ATH by reinforcing effect, but a minimum value at 200 phr of ATH owing to slippage between the flame retardant by the external stress. In the measurement of solvent resistance in tetrahydrofuran, the increasing ATH content yielded enhancement of solvent resistance by reducing swelling of the composite, and increasing EPDM content also resulted from increase of the solvent resistance by reduction of polarizability as well as increase of crosslink in the composites.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.353-358
• /
• 2008

Maleated ethylene-propylene-diene terpolymer (MEPDM) was prepared from solution polymerization of EPDM and maleic anhydride. MEPDM-grafted-poly (dimethylsiloxane) (PDMS) copolymer (MEPDM-g-PDMS) was prepared from copolymerization of MEPDM with $\alpha$,$\omega$-hydroxyl group terminated PDMS. The MEPDM-g-PDMS was compounded with HDPE and 4-ethoxybenzoic acid modified MWCNT at $180^{\circ}C$ and positive temperature coefficient (PCT) behavior of the MWCNT composite was investigated. Surface modification of MWCNT enabled it to be more uniformly dispersed in polymer matrix and decreased aggregation of particles. Electrical resistivity of the composite was abruptly increased at melting temperature and PTC intensity of 2.3 was obtained at 15% loading of surface modified CNT.

• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.865-872
• /
• 2007

The waterborne perfluoroacylic polyurethane composite (WFPUC) series were prepared by the emulsion polymerization (WFPUC-E) and the physical blending (WFPUC-B). WFPUC-E was prepared by polymerizing perfluoroalkyl ethyl acrylate (FA) and waterborne polyurethane (WPU), and WFPUC-B was prepared by blending FA copolymer and WPU. The structures of the synthesized WFPUC were identified by using FT-IR-ATR. The surface and thermal properties of the synthesized WFPUC were investigated by measuring contact angle, surface energy, and TGA. The surface energy of WFPUC-E was lower than that of WFPUC-B. The thermal stability of the WFPUC-B showed better than that of the WFPUC-E.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.132-139
• /
• 2004

Film forming behavior of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. The film forming behavior was evaluated using pseudo on-line measurements of the cumulative weight loss, the UV transmittance, and the tensile fracture energy. Each stages of film formation I, II were not sensitive to the morphology of model latexes, but stage-ill was largely dependent on the morphology of model latexes. The chain mobility of polymer which composed the shell component was found to dominantly determine the behavior of film forming stage-III.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.205-210
• /
• 2007

Collagen is the major structural protein of connective tissues. It can be used as a prosthetic biomaterial applicable to artificial skin, tendon, ligaments, and collagen implants. The objective of this study is to investigate the possibility of realizing wound dressing medical products by the synthesis of composite materials with collagen and a biodegradable polymer, PLLA, via a surface modification process. Type I collagen was obtained from pig skin by a separation process. The structural characteristics of the extracted collagen were confirmed by SDS-polyacrylamide (PAcr) gel electrophoresis (PAGE) and FTIR. Also, PLLA-g-PAcr was synthesized by the radical polymerization of acrylamide initiated by AIBN in the presence of PLLA. The surface of PLLA was modified by the presence of the acrylamide residues. The structural characteristics of the copolymer were analyzed by FTIR, $^1H-NMR$ and contact angle measurements. The water uptake and WVTR of the collagen/PLLA-g-PAcr composite tended to increase with increasing collagen concentration and with decreasing EDC concentration.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.496-502
• /
• 2015

Facilitated transport is one of the possible solutions to simultaneously improve permeability and selectivity, which is challenging in conventional polymer-based membranes. Olefin/paraffin separation using facilitated transport membrane has received much attention as an alternative solution to the conventional distillation process. Herein, we report olefin separation composite membranes based on the polymer blends containing $AgBF_4/Al(NO_3)_3$ mixed salts. Free radical polymerization process was used to synthesize an amphiphilic graft copolymer of poly(dimethyl siloxane)-graft- poly(ethylene glycol) methyl ether methacrylate (PDMS-g-POEM). In addition, poly(ethylene oxide) (PEO) was introduced to the PDMS-g-POEM graft copolymer to form polymer blends with various ratios. The propylene/propane mixed-gas selectivity and permeance reached up to 5.6 and 10.05 GPU, respectively, when the PEO loading was 70 wt% in polymer blend. The improvement of olefin separation performance was attributed to the olefin facilitating silver ions as well as the highly permeable blend matrix. The stabilization of silver ions in the composite membrane was achieved through the introduction of $Al(NO_3)_3$ which suppressed the reduction of silver ions to silver particles.

• Composites Research
• /
• v.16 no.2
• /
• pp.54-61
• /
• 2003

In this study, manufacturing process for microcapsules with the self-healing agent was introduced and the characteristics of microcapsules manufactured by varying with various manufacturing process variables were evaluated through a particle size analyzer, an optical microscope, and a TGA. Urea-formaldehyde resin was used for the thin wall of microcapsules and DCPD (dicyclopentadiene) was used for the self-healing agent. The various manufacturing process variables, such as (1) 24hr, 40hr, 48hr, 60hr of the solution time of the EMA copolymer, (2) pH3.5, pH4.0, pH4.5 of the hydrogen ion concentration of the emulsified solution, (3) 400rpm, 500rpm, 600rpm, 1000rpm of the agitation speed of the emulsified solution, (4) $50^{\circ}$, $55^{\circ}$, $60^{\circ}$ of the reaction temperature of the emulsified solution, were considered. According to the results, the particle size distribution of microcapsules was affected on the agitation speed, and the thermal stability of microcapsules was influenced by the solution time of the EMA copolymer, the hydrogen ion concentration, and the reaction temperature of the emulsified solution. Therefore, suitable manufacturing process variables should be applied to obtain thermally stable microcapsules capable of containing the healing agent capable until the thin wall of microcapsules were to be burned.