• Land and Housing Review
• /
• v.4 no.2
• /
• pp.133-144
• /
• 2013

It is commonplace to refer to the Nordic countries of Sweden, Norway, Denmark, Finland and Iceland as a distinctive and homogenous welfare regime. As far as social housing is concerned, however, the institutional heritage of the respective countries significantly frames the ways in which social housing is understood, regulated and subsidized, and, in turn, how housing regimes respond to the general challenges to the national welfare states. The paper presents a historical institutionalist approach to understanding the diversity of regime responses in the modern era characterized by increasing marketization, welfare criticism and internationalization. The aim is to provide outside readers a theoretically guided empirical insight into Scandinavian social housing policy. The paper first lines up the core of the inbuilt argument of historical institutionalism in housing policy. Secondly, it briefly introduces the distinctive ideal typical features of the five housing regimes, which reveals the first internal distinction between the universal policies of Sweden and Denmark selective policies of Iceland and Finland. The Norwegian case constitutes a transitional model from general to selective during the past quarter of a decade. The third section then concentrates on the differences between Denmark, Sweden and Norway in which social housing is, our was originally, embedded in a universal welfare policy targeting the general level of housing quality for the entire population. Differences stand out, however, between finance, ownership, regulation and governance. The historical institutional argument is, that these differences frame the way in which actors operating on the respective policy arenas can and do respond to challenges. Here, in this section we lose Norway, which de facto has come to operate in a residual manner, due to contemporary effects of the long historical heritage of home ownership. The fourth section then discusses the recent challenges of welfare criticism, internationalization and marketization to the universal models in Denmark and Sweden. Here, it is argued that the institutional differences between the Swedish model of municipal ownership and the Danish model of independent cooperative social housing associations provides different sources of resistance to the prospective dismantlement of social housing as we know it. The fifth section presents the recent Danish reform of the governance model of social housing policy in which the housing associations are conceived of as 'dialogue partners' in the local housing policy, expected to create solutions to, rather than produce problems in social housing areas. The reform testifies to the strategic ability of the Danish social housing associations to employ their historically grounded institutional relative independence of the public system.

• Korean Journal of Veterinary Service
• /
• v.32 no.1
• /
• pp.49-59
• /
• 2009

At the present study, it was aimed to explore the states of antimicrobial resistant Salmonella spp. isolates from 3,850 pigs (2,732 ileocecocolic lymphnodes and 1,118 cecal contents) and 1,764 cattle (965 cecal lymphnodes and 799 cecal contents) slaughtered in Busan province from December 2000 to November 2001. Among 5,614 samples, 457 of Salmonella spp. were isolated from pig lymphnodes (13.5%), pig cecal contents (4.4%), cattle lymphnodes (3.5%) and cattle cecal contents (0.5%). Salmonella spp. were showed different isolation ratio, that was 10.8% in summer, 9.0% in autumn, 8.4% in spring and 5.0% in winter. As a result of serotyping, B group (65.4%) were identified as the most common in pigs and cattle, in order of $C_1$ (14.0%), $D_1$ (5.5%), $C_2$ (4.2%), $E_1$ (4.2%) and L (3.5%). 34 serotypes were found, among them, Salmonella Typhimurium (S. Typhimurium) (21.0%) was the most common serotype from pigs and cattle. The major serotypes were in order of S. Derby (15.3%), S. Schwarzengrund (14.7%), S. Typhimurium var Copenhagen (9.2%), S. Mbandaka (5.7%), S. Enteritidis (5.5%) and S. Ruiru (3.5%). The most common serotype was S. Typhimurium in pigs, and S. Ruiru in cattle. S. Ruiru was firstly isolated from pigs and cattle in Korea. In antimicrobial susceptibility test, all the isolates were demonstrated susceptibility to norfloxacin and ofloxacin. But the isolates were showed resistance other antibiotics in order of doxycycline (68.3%), tetracycline (67.8%), penicillin (54.5%) and streptomycin (52.5%). S. Typhimurium were exhibited resistance to ampicillin (34.8%), chloramphenicol (36.2%), streptomycin (94.9%), sulfamethoxazole/trimethoprim (34.8%) and tetracycline (97.8%). There were 53 strains (38.4%) which had multi drug resistant (MDR) isolates, resistant to more than 6 antimicrobial agents. The most common resistance patterns of MDR isolates were ampicillin, chloramphenicol, carbenicillin, doxycycline, nalidixic acid, penicillin, streptomycin, sulfamethoxazole/trimethoprim and tetracycline (ACCbDNaPSSuT).

• ALGAE
• /
• v.29 no.2
• /
• pp.75-99
• /
• 2014

A small dinoflagellate, Ansanella granifera gen. et sp. nov., was isolated from estuarine and marine waters, and examined by light microscopy, scanning electron microscopy, and transmission electron microscopy. In addition, the identity of the sequences (3,663-bp product) of the small subunit (SSU), internal transcribed spacer (ITS) region (ITS1, 5.8S, ITS2), and D1-D3 large subunit (LSU) rDNA were determined. This newly isolated, thin-walled dinoflagellate has a type E eyespot and a single elongated apical vesicle, and it is closely related to species belonging to the family Suessiaceae. A. granifera has 10-14 horizontal rows of amphiesmal vesicles, comparable to Biecheleria spp. and Biecheleriopsis adriatica, but greater in number than in other species of the family Suessiaceae. Unlike Biecheleria spp. and B. adriatica, A. granifera has grana-like thylakoids. Further, A. granifera lacks a nuclear fibrous connective, which is present in B. adriatica. B. adriatica and A. granifera also show a morphological difference in the shape of the margin of the cingulum. In A. granifera, the cingular margin formed a zigzag line, and in B. adriatica a straight line, especially on the dorsal side of the cell. The episome is conical with a round apex, whereas the hyposome is trapezoidal. Cells growing photosynthetically are $10.0-15.0{\mu}m$ long and $8.5-12.4{\mu}m$ wide. The cingulum is descending, the two ends displaced about its own width. Cells of A. granifera contain 5-8 peripheral chloroplasts, stalked pyrenoids, and a pusule system, but lack nuclear envelope chambers, a nuclear fibrous connective, lamellar body, rhizocysts, and a peduncle. The main accessory pigment is peridinin. The SSU, ITS regions, and D1-D3 LSU rDNA sequences differ by 1.2-7.4%, >8.8%, and >2.5%, respectively, from those of the other known genera in the order Suessiales. Moreover, the SSU rDNA sequence differed by 1-2% from that of the three most closely related species, Polarella glacialis, Pelagodinium bei, and Protodinium simplex. In addition, the ITS1-5.8S-ITS2 rDNA sequence differed by 16-19% from that of the three most closely related species, Gymnodinium corii, Pr. simplex, and Pel. bei, and the LSU rDNA sequence differed by 3-4% from that of the three most closely related species, Protodinium sp. CCMP419, B. adriatica, and Gymnodinium sp. CCMP425. A. granifera had a 51-base pair fragment in domain D2 of the large subunit of ribosomal DNA, which is absent in the genus Biecheleria. In the phylogenetic tree based on the SSU and LSU sequences, A. granifera is located in the large clade of the family Suessiaceae, but it forms an independent clade.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.2
• /
• pp.185-196
• /
• 2024

Objectives: Excess mortality associated with long-term exposure to fine particulate matter (PM_2.5) has been documented. However, research on the disease burden following short-term exposure is scarce. We investigated the cause-specific mortality burden of short-term exposure to PM_2.5 by considering the potential non-linear concentration-response relationship in Korea. Methods: Daily cause-specific mortality rates and PM_2.5 exposure levels from 2010 to 2019 were collected for 8 Korean cities and 9 provinces. A generalized additive mixed model was employed to estimate the non-linear relationship between PM_2.5 exposure and cause-specific mortality levels. We assumed no detrimental health effects of PM_2.5 concentrations below 15 ㎍/m³. Overall deaths attributable to short-term PM_2.5 exposure were estimated by summing the daily numbers of excess deaths associated with ambient PM_2.5 exposure. Results: Of the 2 749 704 recorded deaths, 2 453 686 (89.2%) were non-accidental, 591 267 (21.5%) were cardiovascular, and 141 066 (5.1%) were respiratory in nature. A non-linear relationship was observed between all-cause mortality and exposure to PM_2.5 at lag0, whereas linear associations were evident for cause-specific mortalities. Overall, 10 814 all-cause, 7855 non-accidental, 1642 cardiovascular, and 708 respiratory deaths were attributed to short-term exposure to PM_2.5. The estimated number of all-cause excess deaths due to short-term PM_2.5 exposure in 2019 was 1039 (95% confidence interval, 604 to 1472). Conclusions: Our findings indicate an association between short-term PM_2.5 exposure and various mortality rates (all-cause, non-accidental, cardiovascular, and respiratory) in Korea over the period from 2010 to 2019. Consequently, action plans should be developed to reduce deaths attributable to short-term exposure to PM_2.5.

• Pediatric Infection and Vaccine
• /
• v.9 no.2
• /
• pp.208-214
• /
• 2002

Purpose : The number of newborns vaccinated with BCG of Tokyo 172 strain, which has been claimed to cause lesser degree of local adverse events including scar, has recently been increasing. However, tuberculin response to this vaccine has inadequately been studied, especially with newborns cared at primary care clinics. We, therefore, performed a study in newborns vaccinated with BCG at private pediatric offices and evaluated the response to PPD 2TU or PPD 5TU following vaccination with percutaneous or intradermal BCG. Methods : Two hundred infants who had been cared at three private pediatric offices were retrospectively enrolled in the study. One hundred fifty one infants had received percutaneous BCG(Tokyo strain); 129 infants had had tuberuclin test with PPD 2TU and the rest of 22 infants with PPD 5TU. Forty nine infants had received intradermal BCG(28 infants Copenhagen strain, I infant French strain, 20 infants unknown); 35 infants had had tuberculin test with PPD 2TU, 14 infants(11%) with PPD 5TU. Results : In infants vaccinated with percutaneous BCG, the mean induration diameter in tuberculin test was significantly greater with PPD 5TU($12.4{\pm}3.5mm$) compared to PPD 2TU ($9.2{\pm}4.4mm$). In infants vaccinated with intradermal BCG, the mean induration diameters in tuberculin test were $5.7{\pm}5.1mm$ to PPD 2TU and $6.6{\pm}4.8mm$ to PPD 5TU, which were not significantly different. The tuberculin response to PPD 2TU was significantly greater in infants vaccinated with percutaneous BCG compared to those with intradermal BCG. The tuberculin response to PPD 5TU was also significantly greater in infants vaccinated with percutaneous BCG compared to those with intradermal BCG. Conclusion : Percutaneous BCG(Tokyo strain) seems to cause greater response to tuberculin compared to intradermal BCG and PPD 2TU induces weaker response compared to PPD 5TU. Acknowledging some discrepancies from the previously reported data, which might have been due to the different source of the study subjects, more studies are needed to establish the range of tuberculin response following BCG vaccination in order to differentiate from tuberculosis.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.350-355
• /
• 2009

Bond strength depends on characteristics of bonding surface and restorative technique. The majority of studies dealing with dentin bond strength were carried out on flat bonding surface, therefore, difference of bond strength between axial wall and pulpal wall is not clear yet. This study evaluated bonding difference between cavity walls in class I composite resin restoration with different filling techniques. Twenty extracted caries-free human third molars were used. Cavities were prepared in 6 ${\times}$4 ${\times}$3 mm box-type and divided into four groups according to filling technique and bonding surface: Group I; bulk filling - pulpal wall, Group II; bulk filling - axial wall, Group III; incremental filling - pulpal wall, Group IV; incremental filling - axial wall. Cavities were filled with Filtek $Z250^{(R)}$(3M/ESPE., USA) and Clearfill SE $bond^{(R)}$(Kuraray, Japan). After 24 hour-storage in $37^{\circ}C$water, the resin bonded teeth were sectioned bucco-lingualy at the center of cavity. Specimens were vertically sectioned into 1.0 ${\times}$1.0 mm thick serial sticks perpendicular to the bond surface using a low-speed diamond saw (Accutom 50, Struers, Copenhagen, Denmark) under water cooling. The trimmed specimens were then attached to the testing device and in turn, was placed in a universal testing machine (EZ test, Shimadzu Co., Kyoto, Japan) for micro-tensile testing at a cross-head speed of 1 mm/min. The results obtained were statistically analyzed using 2-way ANOVA and t-test at a significance level of 95%. The results were as follows: 1. There was no significant difference between bulk filling and incremental filling. 2. There was no significant difference between pulpal wall and axial wall, either. Within the limit of this study, it was concluded that microtensile bond strength was not affected by the filling technique and the site of cavity walls.

• Journal of Climate Change Research
• /
• v.2 no.2
• /
• pp.93-106
• /
• 2011

Republic of Korea officially announced its mid term reduction target which reduce about 30% of BAU GHG emission by 2020 in the 15th meeting of UNFCCC(COP 15) held in Copenhagen, Denmark 2009. To achieve this goal, it is necessary to understand the serious of climate change and take part in GHG reduction not only industry but also the nation. However, such positive participation in green life which may cause inconvenient of the life of the people. It should be accomplished with providing reliable information. This study suggests the scientific potentialities of GHG emission by guideline on low carbon life and green life to form and change a lifestyle suitable for coping with climate change. And also, this study quantitate the GHG reduction which may reduce demand for air conditioning by cool biz and warm biz. In Korea, this campaign has become known as 'CoolMaebsi' by Ministry of Environmental of Korea. 'CoolMaebsi' is a compound word of 'Cool' which means feel refreshed, and 'Maebsi' is a Korean word which means attire. Though this campaign is effective and significant to reduce the GHG emission yet there were no study on quantitative analysis. Therefore this study calculated reduced energy consumption and potential GHG emission by measuring variation of skin temperature. As the result, wearing warm biz and cool biz have an effect of reducing not only the energy consumption but also GHG emission. To achieve the low carbon society, it is necessary to improve the energy saving system and introduce the policy which guide to change a life style.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.203-210
• /
• 2019

Purpose: The purpose of this study was to verify the effect of the abutment superimposition process on the final virtual model in the scanning process of single and 3-units bridge model using a dental model scanner. Materials and methods: A gypsum model for single and 3-unit bridges was manufactured for evaluating. And working casts with removable dies were made using Pindex system. A dental model scanner (3Shape E1 scanner) was used to obtain CAD reference model (CRM) and CAD test model (CTM). The CRM was scanned without removing after dividing the abutments in the working cast. Then, CTM was scanned with separated from the divided abutments and superimposed on the CRM (n=20). Finally, three-dimensional analysis software (Geomagic control X) was used to analyze the root mean square (RMS) and Mann-Whitney U test was used for statistical analysis (${\alpha}=.05$). Results: The RMS mean abutment for single full crown preparation was $10.93{\mu}m$ and the RMS average abutment for 3 unit bridge preparation was $6.9{\mu}m$. The RMS mean of the two groups showed statistically significant differences (P<.001). In addition, errors of positive and negative of two groups averaged $9.83{\mu}m$, $-6.79{\mu}m$ and 3-units bridge abutment $6.22{\mu}m$, $-3.3{\mu}m$, respectively. The mean values of the errors of positive and negative of two groups were all statistically significantly lower in 3-unit bridge abutments (P<.001). Conclusion: Although the number of abutments increased during the scan process of the working cast with removable dies, the error due to the superimposition of abutments did not increase. There was also a significantly higher error in single abutments, but within the range of clinically acceptable scan accuracy.