• Title/Summary/Keyword: Coordination control

Search Result 610, Processing Time 0.024 seconds

Effect of the Elevated Temperature on the Growth and Physiological Responses of Peach 'Mihong' (Prunus persica) (온도 상승처리가 복숭아 '미홍'의 수체생육 및 생리반응에 미치는 영향)

  • Lee, Seul Ki;Cho, Jung Gun;Jeong, Jae Hoon;Ryu, Suhyun;Han, Jeom Hwa;Do, Gyung-Ran
    • Journal of Bio-Environment Control
    • /
    • v.29 no.4
    • /
    • pp.373-380
    • /
    • 2020
  • This study was conducted to investigate the effect of elevated temperatures on the growth and physiological responses of peach 'Mihong' (Prunus persica). We simulated three different temperature conditions in the sunlight phytotron rooms from April 25 to July 5, 2019; Control (average temperature in normal years in Jeonju city), +3.4℃ treatment (expecting temperature in mid-21st century), +5.7℃ treatment (expecting temperature in late 21st century). The shoot numbers and lengths were increased while the temperature was increased, but the leaf areas were not statistically different. The harvest dates were July 1, June 24 and 21 at the control, +3.4℃, and +5.7℃, respectively. The fruit weights were increased at +3.4℃ but decreased at +5.7℃ compared to the control. The tree yield was the highest in the +3.4℃ (2,898g), followed by the control (2,746g) and the +5.7℃ (2,404g). These are related to the result that the average of maximum photosynthesis rate at 3.4℃ (14.93μmol·CO2·m-2·s-1) was higher than those at the control (13.79μmol·CO2·m-2·s-1) and +5.7℃ (13.20μmol·CO2·m-2·s-1) from mid-May to early June, the fruit growing season. Also, the stomatal densities were higher at the +3.4℃ (229ea/㎟), compared to the control (181ea/㎟). The rate of floral bud differentiation affecting the yield in the following year was the lowest at the +5.7℃. These results suggest that a temperature elevated to 3.4℃ in the future may give a positive effect on the yield and quality of peach 'Mihong' while a temperature elevated above 5.7℃ may affect negatively.

Research Trends on Soil Erosion Control Engineering in North Korea (북한의 사방공학 분야 연구동향 분석)

  • Kim, Kidae;Kang, Minjeng;Kim, Dongyeob;Lee, Changwoo;Woo, Choongshik;Seo, Junpyo
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.4
    • /
    • pp.469-483
    • /
    • 2019
  • North Korea has experienced floods and sediment-related disasters annually since the 1970s due to deforestation. It is of paramount importance that technologies and trends related to forest restoration and soil erosion control engineering be properly understood in a bid to reduce damage from sediment-related disasters in North Korea, and to effect national territorial management following unification. This paper presents a literature review and bibliometric analysis including 146 related articles published in North Korea. First, we analyzed the textual characteristics of the articles. We then employed the VOSviewer software package to classify the research topic and analyzed this topic based on the time change. The results showed that articles on the topic have consistently increased since the 1990s. In addition, research related to soil erosion control engineering has been classified into four subjects in North Korea: (i) assessment of hazard area on soil erosion and soil loss, sediment related-disasters; (ii) hydraulic and hydrologic understanding of forests; (iii) reasonable construction of soil erosion control structures; and (iv) effects and management plan of soil erosion control works. The proportion of research related to the (ii) hydraulic and hydrologic understanding of forests had been significant during the reign of Kim Ilsung. However, the proportion of research related to the (i) assessment of hazard area on soil erosion and soil loss, sediment-related disasters, increased during the reign of Kim Jongil and Kim Jongun. Using these results, our analysis indicated that an interest in and need for soil erosion control engineering in North Korea has continually increased. The results of this study are expected to serve as a basis for preparing forestry cooperation between North and South Korea, and to serve as essential data for better understanding soil erosion control engineering in North Korea.

A Control Method for designing Object Interactions in 3D Game (3차원 게임에서 객체들의 상호 작용을 디자인하기 위한 제어 기법)

  • 김기현;김상욱
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.9 no.3
    • /
    • pp.322-331
    • /
    • 2003
  • As the complexity of a 3D game is increased by various factors of the game scenario, it has a problem for controlling the interrelation of the game objects. Therefore, a game system has a necessity of the coordination of the responses of the game objects. Also, it is necessary to control the behaviors of animations of the game objects in terms of the game scenario. To produce realistic game simulations, a system has to include a structure for designing the interactions among the game objects. This paper presents a method that designs the dynamic control mechanism for the interaction of the game objects in the game scenario. For the method, we suggest a game agent system as a framework that is based on intelligent agents who can make decisions using specific rules. Game agent systems are used in order to manage environment data, to simulate the game objects, to control interactions among game objects, and to support visual authoring interface that ran define a various interrelations of the game objects. These techniques can process the autonomy level of the game objects and the associated collision avoidance method, etc. Also, it is possible to make the coherent decision-making ability of the game objects about a change of the scene. In this paper, the rule-based behavior control was designed to guide the simulation of the game objects. The rules are pre-defined by the user using visual interface for designing their interaction. The Agent State Decision Network, which is composed of the visual elements, is able to pass the information and infers the current state of the game objects. All of such methods can monitor and check a variation of motion state between game objects in real time. Finally, we present a validation of the control method together with a simple case-study example. In this paper, we design and implement the supervised classification systems for high resolution satellite images. The systems support various interfaces and statistical data of training samples so that we can select the most effective training data. In addition, the efficient extension of new classification algorithms and satellite image formats are applied easily through the modularized systems. The classifiers are considered the characteristics of spectral bands from the selected training data. They provide various supervised classification algorithms which include Parallelepiped, Minimum distance, Mahalanobis distance, Maximum likelihood and Fuzzy theory. We used IKONOS images for the input and verified the systems for the classification of high resolution satellite images.

Traffic Signal Control Strategy for Passive Tram Signal Priority on City Arterial (도시부 간선도로의 고정식 트램 우선신호를 위한 교통신호운영 전략)

  • Jeong, Young-Je;Kim, Young-Chan;Kim, Dae-Ho
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.10 no.1
    • /
    • pp.27-41
    • /
    • 2011
  • This research proposes new tram signal coordination model, called MAXBAND MILP-Tram for a passive tram signal priority strategy. The proposed model was formulated based on the MAXBAND model that was a traditional arterial signal optimization model. The model could calculate the bandwidth solutions for both general-purpose-lane traffic and median-tram-lane traffic. Lower progression speed are applied for the tram traffic considering lower running speed and dwell time at the stations. A phase sequence procedure determines the green times and left-turn phase sequences for tram traffic in median tram lane. To estimate the performance of the MILP-Tram model, the control delay of trams were estimated using the micro simulation model, VISSIM. The analysis results showed 57 percent decrease of the tram compared to the conventional signal timing model. The delay for car, however, increased 18 percent. The sensitivity analysis indicated that the passive tram signal priority strategy using the offset and phase sequence optimization was effective in reducing the person delay under the congested traffic condition.

Effects of High Performance Greenhouse Films on Growth and Fruit Quality of Tomato (기능성 피복재가 토마토 생육 및 품질에 미치는 영향)

  • Kwon, Joon-Kook;Cho, Myeomg-Whan;Kang, Nam-Jun;Kang, Yun-Im;Park, Kyoung-Sub;Lee, Jae-Han
    • Journal of Bio-Environment Control
    • /
    • v.18 no.3
    • /
    • pp.232-237
    • /
    • 2009
  • This study was performed to investigate the effect of high performance greenhouse films on growth and fruit quality of tomato. For this purpose, polyolefin (PO), fluoric, antidrop, antifog and thermal films were compared to normal film, ethylene vinyl acetate (EVA). In spectral irradiance of the films, UV ($300{\sim}400nm$) transmittance was highest in fluoric film and lowest in PO film. PAR (photosynthetically active radiation, $400{\sim}700nm$) transmittance was higher in fluoric, thermal and PO film, and near infrared ray (NIR, $700{\sim}1,100nm$) transmittance was higher in high performance films, compared to the EVA film. Total light transmittance was higher in order of fluoric, antifog, anti drop, PO, thermal, and EVA film. Day air temperature in greenhouse was highest under fluoric film and lowest under EVA film due to the light transmittance, while night air temperature was highest under PO and anti drop film due to the thickness of film. Tomato fruits grown under the high performance films had 0.2 to $0.5^{\circ}Bx$ higher soluble solids and 15 to 30% higher lycopene content, compared to those grown under the EVA film. The results showed that tomato fruit quality such as soluble solids and lycopene content can be heightened in terms of much irradiation and better light quality of high performance films, compared to the nomal film, EVA film.

Effects of Subsurface Drip Irrigation and Aeration in Green Pepper Cultivation (시설풋고추 재배에서의 지중관수 및 공기주입 효과)

  • Kwon, Joon-Kook;Kang, Nam-Jun;Cho, Myeomg-Whan;Kang, Yun-Im;Park, Kyoung-Sub;Lee, Jae-Han
    • Journal of Bio-Environment Control
    • /
    • v.18 no.3
    • /
    • pp.225-231
    • /
    • 2009
  • 'Nokkwang' green pepper plants were grown in soil system (silty loam with pH 6.5) under the greenhouse, to determine the effects of subsurface drip irrigation (SDI) and subsurface drip irrigation plus aeration (SDIA) into root zone comparing with conventional surface drip irrigation (DI) in terms of water use efficiency, soil properties, and growth and fruit yield. Two drip lines per crop row were layed on the soil surface in DI system, buried at a depth of 20cm below the soil surface in SDI system, and also buried at a depth of20cm below the soil surface and aerated for 3minutes a hour during the daytime ($08:00{\sim}19:00$) by a air compressor in SDIA system. A automatic irrigation with starting point of -20kPa and ending point of -10kPa based on soil moisture contents was applied by controllers and electronic vacum soil moisture sensors. Reduction in soil moisture contents was delayed in SDI and SDIA, compared to DI. Irrigation amount applied in pepper cultivation was around 30% less in SDI than in DI. Electric conductivity and nitrate nitrogen content in the surface soil grown green pepper were significantly lowered in SSDI and SDIA, compared to DI. Better development of root system was observed in SDIA and SDI than in DI. Results showed that pepper fruit yield increased by 30% in SDIA and 22% in SDI in comparision with DI.

Changes in Growths of Tomato and Grafted Watermelon Seedlings and Allometric Relationship among Growth Parameters as Affected by Shading During Summer (여름철 차광처리에 따른 토마토묘와 수박 접목묘의 생육과 생육지표간 상대적 관계)

  • Kang, Yun-Im;Kwon, Joon-Kook;Park, Kyoung-Sub;Yu, In-Ho;Lee, Si-Young;Cho, Myeong-Whan;Kang, Nam-Jun
    • Journal of Bio-Environment Control
    • /
    • v.19 no.4
    • /
    • pp.275-283
    • /
    • 2010
  • This study was conducted to examine the changes in growths of tomato and watermelon seedlings and the relationship among growth parameters which are used to evaluate healthy seedling as affected by shading. Plants were grown under 0%, 25%, 50%, and 75% shadings using polyethylene films. Leaf area index (LAI) of tomato and grafted watermelon seedlings increased under 50% and 75% shading. Total dry weight decreased with increase of shading level. The growth rates of stem diameter, LAI, total weight were faster under 50% and 75% shading with increase of integral radiation than under 0% and 25% shading. Stem diameters of tomato and grafted watermelon seedlings showed no significant differences among shading regimes. Stem diameters of tomato seedlings had upward tendency with increase of total dry weight and shoot height, but there were no significant differences among shading regimes. Stem diameters of grafted watermelon seedlings had no relationship with shoot height. These results indicate that stem diameter of tomato seedlings is not appropriate for assessing seedlings quality but stem diameter of grafted watermelon seedlings with shoot height is available.

Effect of different types of biochar on the growth of Chinese cabbage (Brassica chinensis)

  • Lee, Jae-Han;Seong, Chang-Jun;Kang, Seong-Soo;Lee, Ho-Cheol;Kim, Soo-Hun;Lim, Ji-Sun;Kim, Jae-Hong;Yoo, Joun-Hyuk;Park, Jung-Hyun;Oh, Taek-Keun
    • Korean Journal of Agricultural Science
    • /
    • v.45 no.2
    • /
    • pp.197-203
    • /
    • 2018
  • Biochar is the carbon solid produced through the pyrolysis of a biomass from organic sources such as agricultural waste, animal manure, and sludge under limited or anaerobic conditions. Biochar has the effect of reducing greenhouse gases through the carbon sequestration method; additionally, biochar is known to function as a soil amendment. This experiment was conducted to evaluate the application of biochar on the growth characteristics of Chinese cabbage at Chungnam National University in Daejeon, Korea. The Chinese cabbage was grown for 50 days in a glasshouse in pots. A pruning branch was used to produce the bead and pellet forms of biochar through pyrolysis. The biochar was added to the soil at 0, 2, and 5% by weight. The Chinese cabbage with the 2% treatment of the bead form of biochar had the highest fresh weight ($149.43{\pm}15.92g\;plant^{-1}$) which was increased by 10% compared to the control ($136.91{\pm}31.46g\;plant^{-1}$). Moreover, for the 5% treatment of the bead form of biochar ($60.91{\pm}9.82g\;plant^{-1}$), the growth decreased by 57% compared to the control. As the content of the bead form of biochar increased, the shoot dry weight, leaf number, leaf length and lead width that appeared decreased. An increase in the total organic matter, Avail. $P_2O_5$, Ex. cation and EC was observed when the biochar content was increased. Our results support the application of 2% biochar in the bead form for increased growth of Chinese cabbage.

Effect of Seed Density, Number of Seeds Sown Per Hole and Thinning Treatment on Growth Characteristics and Disease Occurrence in Greenhouse-Cultivated Ginseng (인삼 하우스 직파재배시 파종밀도, 혈당 파종립수, 솎음처리가 생육과 병 발생에 미치는 영향)

  • Mo, Hwang Sung;Park, Hong Woo;Jang, In Bae;Yu, Jin;Park, Kee Choon;Hyun, Dong Yun;Kim, Ki Hong;Seo, Tae Cheol
    • Korean Journal of Medicinal Crop Science
    • /
    • v.23 no.3
    • /
    • pp.198-206
    • /
    • 2015
  • This study was conducted to investigate the effects of sowing density, number of seeds sown per hole, and thinning treatment on growth characteristics and disease occurrence in Panax ginseng under direct sowing cultivation in a blue plastic greenhouse. Seedling were grown from 2 or 3 seeds sown, and the healthiest was only retained, while the rest were thinned out at the foliation stage. $NO_3$-N, $P_2O_5$, and organic matter content differed significantly between growth conditions in the plastic greenhouse and in conventional shade in the soil. Disease also tended to be higher in the conventional shade than in the plastic greenhouse. Plant height and stem length showed an increasing trend with increasing sowing density and number of seeds sown per hole. However, these measures noticeably decreased when thinning treatment was conducted. Growth of the subterranean part of ginseng was not markedly influenced by sowing density, the number of seeds sown per hole, or thinning treatment. Root weight, which is an important factor in yield, was significantly affected by the number of seeds sown and thinning treatment. Interestingly, root weight tended to be higher in the thinning treatment plot than the untreated control plot. Damping-off and root rot increased noticeably as the number of seeds sown increased. Disease also tended to be substantially higher in the thinning treatment plot than the untreated control. However, physiological disorder of the plants did not vary with sowing density, the number of seeds sown, or thinning treatment.

Study on the Five Tastes in the Yellow Emperor's Canon of Internal Medicine

  • Moon, Young-Oak;Ahn, Min-Seob;Park, Jin-Soo;Kim, Hun-Yeong;Lee, Si-Hyeong;Keum, Kyeong-Soo;Park, Min-Cheol;Jo, Eun-Heui
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.23 no.6
    • /
    • pp.1247-1260
    • /
    • 2009
  • This dissertation aims to study the five tastes in the Yellow Emperor's Canon of Internal Medicine. Medicinals as well as Foods are classified by the five tastes: sweet, sour, bitter, salty and pungent, which can be tasted by the tongue. With the development of the theory dealing with the medicinal properties, some flavors are summarized out of clinical actions of medicinals, therefore, there is a little difference between the flavors of medicinal herbs and the tastes got by tongue. Each taste acts on or has direct influence on a specific vital organ, and each of which has different physiologic actions. Taste also has a long-term or post digestive effect on the body and its metabolism. When each taste is consumed in moderation, it benefits the corresponding organ. Over-indulgence in any taste harms the organ and creates imbalance among the five vital organ systems. The Korean medicinal herbs with same flavor mostly possess similar actions while the medicinal herbs with different flavors show different actions in the treatment, which are shown as follows. Sour has absorbing, consolidating and astringent actions and acts on the liver. Bitter has the actions of drying or resolving dampness, purging and lowering and acts on the heart. Sweet has the nourishing, harmonizing and moistening actions and acts on the spleen. Pungent has an action of dispersing and promoting circulation of gi and blood and acts on the lungs. Salty has the effects of softening hard nodes or masses and promoting defecation, etc and acts on the kidneys. The five organ systems control and support each other. Proper coordination only exists when there is no one organ stronger or weaker than the rest. Since the five tastes have direct influences on the five organs, the diet we take should have a good combination of the five tastes in order to promote internal balance and harmony. They control our well-being and create dietary balance. Excessive consumption of any of these could result in adverse effects. In a word, when the properties of the five tastes respectively are distinguished, their natures and flavors cannot be separately considered. I think the harmonization of food and medicinals should be stressed on good nutritional diet to maintain good health. The traditional belief that food and medicine share the same origin is a part of Korean medicine tradition.