• 제목/요약/키워드: Coordinated Control

검색결과 241건 처리시간 0.03초

현장적용을 위한 연동형 반감응 신호제어 개발 및 분석 (Developing and Evaluation of Coordinated Semi-Actuated Signal Control for Field Application)

  • 박순용;이석기;정준화
    • 한국콘텐츠학회논문지
    • /
    • 제14권3호
    • /
    • pp.451-462
    • /
    • 2014
  • 본 연구에서는 지방부 간선 또는 지선 축에서 효과적으로 사용 가능한 연동형 반감응 신호제어 알고리즘을 개발하고 이를 평가하였다. 연동형 반감응 신호제어에 대한 모의실험 결과를 살펴보면, 주 부 도로의 교통량 차이가 커질수록 연동형 반감응 신호제어의 지체가 최적화된 고정식 신호제어에 비해 감소하는 것을 확인하였다. 그러나 주부도로의 교통량이 같거나 전체 교통량이 많아지면 최적화된 고정식 신호제어의 지체가 더 낮게 나타났으며, 횡단 보행량이 많아질수록 차량 지체가 증가하는 것으로 확인되었다. 따라서 연동형 반감응 신호제어는 차량 교통량이 일정수준 이하인 곳에 적용하되, 횡단 보행량을 고려하여 적용지역을 선별해야 할 것이다.

Coordinated Droop Control for Stand-alone DC Micro-grid

  • Kim, Hyun-Jun;Lee, Yoon-Seok;Kim, Jae-Hyuk;Han, Byung-Moon
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권3호
    • /
    • pp.1072-1079
    • /
    • 2014
  • This paper introduces a coordinated droop control for the stand-alone DC micro-grid, which is composed of photo-voltaic generator, wind power generator, engine generator, and battery storage with SOC (state of charge) management system. The operation of stand-alone DC micro-grid with the coordinated droop control was analyzed with computer simulation. Based on simulation results, a hardware simulator was built and tested to analyze the performance of proposed system. The developed simulation model and hardware simulator can be utilized to design the actual stand-alone DC micro-grid and to analyze its performance. The coordinated droop control can improve the reliability and efficiency of the stand-alone DC micro-grid.

축소 차수 외란 관측기를 이용한 이종 다개체 시스템의 협조 추종 제어 (Reduced-order Disturbance Observer based Coordinated Tracking of Uncertain Heterogeneous Multi-Agent Systems)

  • 김정수;백주훈
    • 제어로봇시스템학회논문지
    • /
    • 제20권12호
    • /
    • pp.1231-1237
    • /
    • 2014
  • 본 논문에서는 축소 차수 외란 관측기를 이용하여 외란이 있는 이종 다개체 시스템을 위한 협조 추종 제어기를 제안하였다. 이를 위해 우선 주어진 제어 문제가 외란과 모델 불확실성을 가지는 시스템을 위한 강인 제어 문제로 변환 될 수 있음을 보이고 변환된 문제에 외란 관측기 기반의 동적 협조 추종 제어기를 설계하였다. 모의 실험을 통해서 제안하는 이종 다개체 시스템의 협조 추종을 성공적으로 달성함을 보였다.

센서 통합 능력을 갖는 다중 로보트 제어 시스템의 개발 (Development of a multi-robot control system with sensor integrating capability)

  • 서일홍;현웅근;김태원;여희주;김재욱;윤승중
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.1008-1013
    • /
    • 1992
  • 본 논문에서는 다중 로보느의 협조제어(Coordinated Control)를 위한 로보트 콘트롤러의 설계에 대해서 연구한다. 첫 부분에서는 다중 로보느의 연구배경 및 연구동기에 대해서 논의하고 이어서 Coordinated Task를 묘사하기 위한 Programming Primiitive Set을 정의하며 구현에 대해서도 논의한다. 특히 Motopn Primitive는 synchronous(Coordinated Motion), Asynchronous Motion, Conditional Motion, 특수 Motion으로 분류하고, 각각의 궤적계획 및 구현에 대해서도 간단히 논의한다. 특히 본 논문에서는 외부의 변화하는 환경에 효과적으로 적응할 수 있게 하기 위하여 Vision센서, Encoder신호와 Limit센서, Force센서 등의 다양한 외부 센서를 융합 처리할수 있는 다중 로보트 제어 시스템을 개발하였다.

  • PDF

Research Progress of the Structure Vibration-Attitude Coordinated Control of Spacecraft

  • Yang, Jingyu;Qu, Shiying;Lin, Jiahui;Liu, Zhiqi;Cui, Xuanming;Wang, Chu;Zhang, Dujiang;gu, Mingcheng;Sun, Zhongrui;Yang, Kang;Zhou, Lanwei;Chen, Guoping
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제16권4호
    • /
    • pp.590-601
    • /
    • 2015
  • This paper gives an overview of research on the field of structure vibration-attitude coordinated control of spacecraft. First of all, the importance of the technology has been given an introduction, and then later the research progress of space structure dynamics modeling, research progress of structure vibration-attitude coordinated control of flexible spacecraft have been discussed respectively. Finally, future research on application of structure vibration-attitude coordinated control of spacecraft has been recommended.

Spatial target path following and coordinated control of multiple UUVs

  • Qi, Xue;Xiang, Peng;Cai, Zhi-jun
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제12권1호
    • /
    • pp.832-842
    • /
    • 2020
  • The coordination control of multiple Underactuated Underwater Vehicles (UUVs) moving in three dimensional space is investigated in this paper. The coordinated path following control task is decomposed into two sub tasks, that is, path following control and coordination control. In the spatial curve path following control task, path following error dynamics is build in the Serret-Frenet coordinate frame. The virtual reference object can be chosen freely on the desired spatial path. Considering the speed of the UUV, the line-of-sight navigation is introduced to help the path following errors quickly converge to zero. In the coordination control sub task, the communication topology of multiple UUVs is described by the graph theory. The speed of each UUV is adjusted to achieve the coordination. The path following system and the coordination control system are viewed as the feedback connection system. Input-to-state stable of the coordinated path following system can be proved by small gain theorem. The simulation experiments can further demonstrate the good performance of the control method.

CAN기반 분산 제어시스템의 종단 간 지연시간 분석과 협조 스케줄링 알고리즘 개발 (Development of Coordinated Scheduling Algorithm and End-to-end Delay Analysis for CAN-based Distributed Control Systems)

  • 이희배;김홍열;김대원
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제53권7호
    • /
    • pp.501-508
    • /
    • 2004
  • In this paper, a coordinated scheduling algorithm is proposed to reduce end-to-end delay in distributed control of systems. For the algorithm, the analysis of practical end-to-end delay in the worst case is performed priory with considering implementation of the systems. The end-to-end delay is composed of the delay caused by multi-task scheduling of operating systems, the delay caused by network communications, and the delay caused by asynchronous timing between operating systems and network communications. Through some simulation tests based on CAN(Controller Area Network), the proposed worst case end-to-end delay analysis is validated. Through the simulation tests, it is also shown that a real-time distributed control system designed to existing worst case delay cannot guarantee end-to-end time constraints. With the analysis, a coordinated scheduling algorithm is proposed here. The coordinated scheduling algorithm is focused on the reduction of the delay caused by asynchronous timing between operating systems and network communications. Online deadline assignment strategy is proposed for the scheduling. The performance enhancement of the distributed control systems by the scheduling algorithm is shown through simulation tests.

보행 시 연령에 따른 하지 관절 내 운동학적 협응과 제어 (Coordinated Intra-Limb Relationships and Control in Gait Development Via the Angle-Angle Diagram)

  • 이경옥
    • 한국운동역학회지
    • /
    • 제14권3호
    • /
    • pp.17-35
    • /
    • 2004
  • The purpose of this study is to explain developmental process of gait via angle-angle diagram to understand how coordinated relationships and control change with age. Twenty four female children, from one to five years of age were the test subjects for this study, and their results were compared to a control group consisting of twenty one adult females. The Vicon 370 CCD camera, VCR, video timer, monitor, and audio visual mixer was utilized to graph the gait cycle for all test subjects. Both coordinated Intra-limb relationships, and range of motion and timing according to quadrant were explained through the angle angle diagram. Movement in the sagittal plane showed both coordinated relationships and control earlier than movement in the coronal or transverse plane. In the sagittal plane, hip and Knee coordinated relationships developed first (from one year of age.) Coordinated relationships in the Knee and ankle and hip and ankle developed next, respectively. Both hip and ankle and knee and ankle development were inhibited by the inability of children to completely perform plantar flexion during the swing and initial double limb support phases. Children appeared to compensate for this by extending at their hip joint more than adults during the third phase, final double limb support. In many cases the angle angle diagram for children had a similar shape as adult's angle angle diagram. This shows that children can coordinate their movements at an early age. However, the magnitudes and timing of children's angle angle diagrams still varied greatly from adults, even at five years of age. This indicates that even at this age, children still do not possess full control of their movements.

Coordinated Control of an Independent Multi-phase Permanent Magnet-type Transverse Flux Linear Machine Based on Magnetic Levitation

  • Hwang, Seon-Hwan;Kwon, Soon-Kurl;Hwang, Young-Gi;Bang, Deok-Je
    • 조명전기설비학회논문지
    • /
    • 제28권12호
    • /
    • pp.95-102
    • /
    • 2014
  • This paper proposes a coordinated control for an independent multi-phase transverse flux linear synchronous motor (IM-TFLSM) based on magnetic levitation. The stator structures of the IM-TFLSM are composed of a two set, which has independent three-phase windings and a double-sided air-gap as opposed to the conventional Y-connected three-phase linear motors. A suitable control algorithm is necessary to operate the applied linear machine. This study proposes a coordinated control algorithm for adjusting the mover air-gap and thrust force of the IM-TFLSM in order to maintain air-gap and phase shifted current control of the independent 3-phase modules. In addition, the principle of operation and its special structures are described in detail and the validity and effectiveness of the control algorithm is verified through multiple experimental results.

CVR을 위한 전압 계측 기반 전압 및 무효전력 협조제어 (Voltage Measurement-based coordinated Volt/VAR Control for Conservation Voltage Reduction)

  • 고석일;최준호;안선주;윤상윤
    • 전기학회논문지
    • /
    • 제66권12호
    • /
    • pp.1689-1696
    • /
    • 2017
  • In this paper, the voltage measurement-based coordinated Voltage/VAR control (VMCVVC) algorithm for conservation voltage reduction(CVR) is proposed. The proposed algorithm has the purpose of enhancing the CVR effect through coordinated control of the voltage control devices such as the distributed energy resources and the load tap changer(LTC) transformers. It calculates the references of the voltage control devices such that the bus voltages are maintained at as close to the lower operation limit as possible. For this purpose, firstly, the distribution system is divided into LTC transformer control zones through topological search. Secondly, the reactive power references of the reactive power control devices are determined such that the voltage profile of the section is flattened. Finally, the tap references of the LTC transformers are calculated to lower the voltage profile. The effectiveness of the proposed algorithm is demonstrated through case studies using IEEE test network.