• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1371-1376
• /
• 1990

The paper presents a method of constructing simple fuzzy control rules for the determination of stabilizing signals of automatic voltage regulator and governor, which are controllers of electric power systems. Fuzzy control rules are simplified by considering a coordinate transformation with the rotation angle .theta. on the phase plane, and by expanding the range of membership functions. Also, two rotation angles .theta. $_{1}$ and .theta. $_{2}$ are selected for the linearizable region and the nonlinear one of the system, respectively. Here, .theta. $_{1}$ is chosen by the pole assignment method, and .theta. $_{2}$ by a performance index. Fuzzy inference is applied to the connection of two rotation angles .theta. $_{1}$ and .theta. $_{1}$ by regarding the distance from the desired equilibrium point as a variable of condition parts. The control effect is demonstrated by an application of the proposed method to one-machine infinite-bus power system.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.255-259
• /
• 2013

In this paper a new coupling method for efficient and simple analysis of single phase induction motor is presented. The circuit representation of both the stator winding and each conducting rotor loop (composed of rotor bar and end ring segment) is used in conjunction with the distribution of magnetic flux linkage instead of inductance matrix. The flux linkage is calculated using air-gap flux density distributions driven by unit currents in the stator windings and rotor bars. The field distribution of one turn of a coil is calculated by FEM and the result is used to calculate total flux linkage by employing a coordinate transformation. The numerical results give good agreement with prior literature. The method is particularly effective in analyzing the effect of the number of rotor bars.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.83-89
• /
• 2002

The cadastral maps as many as about 750,000 map sheets to cover 34,751,000 parcels of land of Korea, are being digitalized. The problem of shrinkage-expansion of the paper cadastral maps has to be resolved for the new digital maps, where the nodes and vertices of the parcel boundaries are represented by coordinates. The photo coordinate refinement techniques, two dimensional projective transformation and local area transformation as in the reseau grid method, were introduced for this distortion correction. Using the fact that original maps drawn on the plane tables in field from 1910 to 1918 have grid lines and have been preserved well, a strategic flow to apply the refinement techniques to the digital maps with the original maps as controls was developed. To accommodate the presence or absence of the original maps and grid lines, and different scales and sizes of the maps, the strategy was implemented by a computer program package. Various distortions and corrections were simulated and errors were evaluated. The RMS errors in the corrected digital maps were allowable, thus, the method developed in this study was to be applicable for the digital cadastral maps.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.12a
• /
• pp.0.2-0
• /
• 2000

Most important step for the color matching in scanner is the color coordinate transformation from the scanner RGB space to device independent uniform color space. A variety of color calibration technologies have been developed for input device. Linear or nonlinear matrices have been conveniently applied to correct the color filter\`s mismatch with color matching function in scanners. The color matching accuracy is expected to be further improved when the nonlinear matrices are optimized into subdivided smaller color spaces than in single matrix of the entire color space. This article proposed the scanner calibration method using subspace division regression analysis and it were compared with conventional method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.181-190
• /
• 2013

We propose an interpolation method considering barrel distortion of fisheye lens using nearest pixels on a corrected image. The correction of barrel distortion comprises coordinate transformation and interpolation. This paper focuses on interpolation. The proposed interpolation method uses nearest four coordinates on a corrected image rather than on a distorted image unlike existing techniques. Experimental results show that both subjective and objective image qualities are improved.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3272-3281
• /
• 1996

The flow analysis method which had been developed for the numerical calculation of 3-dimensional, incompressible and turbulent flow within an axial compressor was extended to the flow field within centrifugal impeller. In this method based on the SIMPLE(Semi Implicit Method Pressure Linked Equations) algorithm, the coordinate transformation was adopted and the standard k-.epsilon. model using wall function was used for turbulent flow analysis. The calculated flow fields have agreed very well with measurement results. Especially, 3-dimensional and viscous flow characteristics including secondary flows, jet-wake flow and decreased pressure rise along impeller passage, which can't be predicted by inviscid Q3D calculation were predicted very reasonably.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.173-180
• /
• 2011

SRMD system which protects MBT from the threats in a short range is composed of 2 radars, 2 IRTs 1 CCU and 2 countermeasures. To analyze the performance of this system, there is a need to make the model of MBT on which this system is loaded. In this paper, a method of MBT movement modeling is proposed to fulfill the above need. The methods of the coordinate system transformation among the components and the modeling of a hull's traveling and a turret's turning are proposed. The method of the modeling of a pose variation caused by the vibrations is proposed and the results of the modeling are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.146-153
• /
• 2003

Ultrasonic inspection of defects has been focused on the existence of defect in structural material and need has much time and expenses in inspecting all the coordinates (x, y) on material surface. Neural networks can have an application to coordinates (x, y) of defects by multi-point inspection method. Ultrasonic inspection modeling is optimized by neural networks Neural networks has trained training example of absolute and relative coordinate of defects, and defect pattern. This method can predict coordinates (x, y) of defects within engineering estimated mean error $\psi$.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.107-113
• /
• 2005

This paper presents a method to reduce errors in registration, which is used in transformation coordinate system of the multiple measuring data. In general, the ICP algorithms and feature-based approaches are used for registration. In order to measure wrap-around object, it is necessary to change the scanning direction or set-up of the object. A fixture is made to reduce registration errors caused by inaccurate center point of tooling balls, providing the more accurate registration method. And, the motorized fixture controls rotation and tilting to get precise the measuring data and registration. The proposed motorized fixture and registration method have advantages in accurate registration and precise measurement, compared with the conventional methods.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.1
• /
• pp.4-16
• /
• 2001

Most important step for the color matching in scanner is the color coordinate transformation from the scanner RGB space to device independent uniform color space. A variety of color calibration technologies have been developed for input device. Linear or nonlinear matrices have been conveniently applied to correct the color filter's mismatch with color matching function in scanners. The color matching accuracy is expected to be further improved when the nonlinear matrices are optimized into subdivided smaller color spaces than in single matrix of the entire color space. This article proposed the scanner calibration method using subspace division regression analysis and it were compared with conventional method.