• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.171-178
• /
• 2007

In mobile ad hoc networks, an application scenario requires mostly group mobility behavior in the mix of group moving nodes and individually moving nodes. The nodes of those applications tend to belong to the movement group with similar movement behavior. Group mobility is one of the good methods to improve scalability, and reduces the protocol overhead. In this paper, we propose the multicast architecture which regards nodes that have equal group mobility in the heterogeneous group mobility network as the single entity with the multiple interfaces and composes multicast tree, The logical cooperative entity-based multicast architecture accommodates the scalability, the multicast tree simplification, and the protocol overhead reduction which arc obtained from the hierarchical multicast architecture, while it maintains the nat multicast architecture for the data transmission. It also prevents the concentration of the energy consumption dispersing data forwarding load into the several ingress/egress nodes. Results obtained through simulations show that logical cooperative entity based multicast protocol with multiple interfaces offers the protocol scalability and the efficient data transmission.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1357-1372
• /
• 2017

Energy harvesting techniques, particularly radio frequency energy harvesting (RF-EH) techniques, which are known to provide feasible solutions to enhance the performance of energy constrained wireless communication systems, have gained increasing attention. In this paper, we consider a wireless-powered cooperative communication network (WPCCN) for transferring energy in the downlink and forwarding signals in the uplink. The objective is to maximize the average transmission rate of the system, subject to the total network power constraint. We formulate such a problem as a form of wireless energy transmission based on resource allocation that searches for the joint subcarrier pairing and the time and power allocation, and this can be solved by using a dual approach. Simulation results show that the proposed joint optimal scheme can efficiently improve system performance with an increase in the number of subcarriers and relays.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.7-12
• /
• 2014

The data forwarding transmission is an important function of the relay in cooperative communication in wireless communication systems. However, additional relay cause the waste of power consumption and cost. Therefore, in this paper, we consider how to use the user mobile devices in stead of relays to deal with this problem. In this paper, we proposed the protocol that divide each relay into two states of idle and non-idle. The receiver has two functions of base station and user mobile device. In this case, it is possible that no additional cost, and improve the spectral efficiency and network capacity. We verified BER performance for the proposed protocol over Rayleigh fading through Monte-Carlo simulation.

• The Journal of Society for e-Business Studies
• /
• v.1 no.1
• /
• pp.227-247
• /
• 1996

Presented in this paper is a control model for developing virtual factory simulator, which is being operated under the distributed environment. The control model consists of production activity plan and information flows. To incorporate elements of the characteristics of the distributed control system, we suggested a collaboration model. This model is working under the client/server architecture, and also designed for cooperative-distributed shop control(CDSC) system in order to exploit several advantages of client/server architecture. Collaboration among each agent(or client) is done through negotiation and task sharing. Based on a contract net model, the CDSC system has three kinds of agents-order agent, resource agent, and communication forwarding agent. Each agent performs shop scheduling and control through negotiation on contract net. No node in CDSC system can have authority over other node. A bidding scheme is employed far negotiation between order agent and resource agents. The CDSC system can support re-negotiation among resource agents and an algorithm for re-negotiation is also developed. Experimental results are shown to advocate the effectiveness of the CDSC system for CIM environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.67-72
• /
• 2014

In this paper, an energy harvesting scheme is applied in the cooperative communication. The proposed scheme uses an energy harvesting relay in which the relay harvests the energy from the source node and transfers to the power form in forwarding the received data to the destination node. The well-known maximal ratio combining (MRC) technique is applied to increase the diversity gain at the destination. Therefore, with applying the proposed energy harvesting scheme, the limited power at the relay is solved, and the operation efficiency of the network and the mobile devices is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate, outage probability, power collection efficiency.

• Annual Conference of KIPS
• /
• 2014.11a
• /
• pp.196-198
• /
• 2014

Wireless Sensor Networks(WSN) 기반의 Border Surveillance Networks(BSN)는 다양한 제한조건을 동반하며 침입 혹은 환경 등을 감시함을 목적으로 하고 있기 때문에 이벤트 발생시 신뢰적인 데이터 전송은 매우 중요한 부분을 차치하게 된다. 본 논문에서 적용한 대표적인 요구기반 라우팅 방법인 Ad hoc On-demand Distance Vector Routing(AODV)는 BSN 에 적용하였을 경우 홉 수(Hop Count)를 메트릭으로 최적의 경로를 계산하고 선택하여 Uni-Path 로 데이터를 전송하게 된다. 이때 AODV 는 Uni-path 로 데이터 전송을 진행하게 되며 링크의 단절이 빈번히 발생하는 BSN 의 환경적 요인으로 데이터 전송의 신뢰성이 감소하게 될 것이며 이는 비효과적인 데이터 전송을 야기하게 된다. 따라서 본 논문에서는 Multi-path 개념을 도입하여 데이터 전송 시 링크단절에 의해 발생하는 시간의 지연을 줄이고 더욱 신뢰성 있게 데이터를 전송할 수 있는 방법을 제안한다. 제안하는 방법은 송, 수신하는 두 노드의 전송범위에 공통으로 속한 노드들이 전송되는 데이터를 중복 전송하게 된다. 그리하여 링크의 단절이 일어날 경우 발생하는 경로 재 탐색 및 경로복구의 발생 빈도를 줄이고 동시에 데이터 전송률을 증가시켜 신뢰적인 데이터 전송을 하게 된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.57-67
• /
• 2015

A large amount of work has been done in the areas of routing, MAC, QoS, capacity, location service, cooperative communication, fault tolerance, mobility models and various applications of mesh networks thanks to their merits of cost-effective way of deployment and flexibility in extending wireline services. Although multi-path routing protocols have been proposed to be used to provide QoS and fault-tolerance, there has not been any significant results discussed that support both in the literature to our best knowledge as they are often required in military and public safety applications. In this paper, we present a novel routing protocol for a mesh network based on the OFDM-TDMA collision-free MAC that discovers and maintains multiple paths that allows retransmitting and forwarding packets that have been blocked due to a link failure using an alternative next-hop node such that the delay-capacity tradeoff is reduced and the reliability is enhanced. Simulation results show that the proposed protocol performs well in terms of both the QoS and delivery ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.56-65
• /
• 2007

Existing application systems of enterprises can process and collect a lot of information within enterprises, but it could be difficult to share validated information with partners and other system in the process of contacting to other legacy systems required in cooperation environment. For solving these problems, EAI systems are introduced in cooperation environment so that data sharing and integration can be achieved. The integration based on EAI is not limited to particular business system but all systems of an enterprise so that standard of suitable metadata level is needed for forwarding consistently between each business of systems. Therefore this paper maintains consistency of data sharing and integrating among legacy systems in cooperative environment for proposing message exchanging based on bridge XMDR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.711-732
• /
• 2019

Many unmanned aerial vehicle (UAV) applications have been employed for performing data collection in facilitating tasks such as surveillance and monitoring objectives in remote and dangerous environments. In light of the fact that most of the existing UAV relaying applications operate in conventional half-duplex (HD) mode, a full-duplex (FD) based UAV relay aided wireless network is investigated, in which the UAV relay helps forwarding information from the source (S) node to the destination (D). Since the activated UAV relays are always floating and flying in the air, its channel state information (CSI) as well as channel capacity is a time-variant parameter. Considering decode-and-forward (DF) relaying protocol in UAV relays, the cooperative relaying channel capacity is constrained by the relatively weaker one (i.e. in terms of signal-to-noise ratio (SNR) or signal-to-interference-plus-noise ratio (SINR)) between S-to-relay and relay-to-D links. The channel capacity can be optimized by adaptively optimizing the transmit power of S and/or UAV relay. Furthermore, a hybrid HD/FD mode is enabled in the proposed UAV relays for adaptively optimizing the channel utilization subject to the instantaneous CSI and/or remaining self-interference (SI) levels. Numerical results show that the channel capacity of the proposed UAV relay aided wireless networks can be maximized by adaptively responding to the influence of various real-time factors.