• 기술혁신연구
• /
• 제12권3호
• /
• pp.73-96
• /
• 2004

This research began by recognizing the development of telecommunication skill in a short period of time as one achievement of launching the national research and development (R&D) project for the diversification of telephone service and for the solution of telephone holdup rate. Under this concern, this research is focusing on searching the influential elements on successful outcome by analyzing the case of Time Division Exchange R&D Project carried out by Korea. Those variables for analyzing the case is limited to 7 definite variables, which are "willingness of policy making organization", "participation of manufacturers and buyers", "support from research and development group", "economy of operating methods and selection of machinery", "rate of technology transfer", "support from Fixer", and "quality management". Summarizing the result of analysis, in order to bring about technological innovation, knowledge creation activity leading to upward efficiency through competition and cooperation making a harmony should be done in one mechanism. I.e., launching an innovative policy should be done in an arena of competition and cooperation, where stability of implementing system is achieved, the entity of "Fixer" is an adequate operator, and competition and cooperation is efficiently managed, among where agreement on purpose and professional opinions are reflected.

• 보건행정학회지
• /
• 제32권1호
• /
• pp.113-121
• /
• 2022

This study aims to compare the healthcare status of South Korea and other member of the Organization for Economic Cooperation and Development (OECD) using the OECD health statistics 2021. We used the position value for relative comparison (PARC) index to measure the five elements of the healthcare system, demand, supply, accessibility, quality, and cost. For the statistical analysis, Mann-Kendall test was performed to examine the trend of the PARC values from 2000 to the most recent year. The results showed that supply, demand, accessibility, and quality were above median than the OECD median and the cost was below median. In sectors such as primary care, health employment and mental health care were below median average. With these result, necessary steps for a sustainable healthcare should be taken into effort by policy makers.

• 한국문헌정보학회지
• /
• 제47권2호
• /
• pp.265-291
• /
• 2013

건강 및 의료, 그리고 웰빙에 대한 관심의 증가로 이와 관련된 정보원의 이용률, 특히 인터넷상의 건강정보원의 이용률이 급증해 왔다. 또한 공공도서관에서의 건강 및 의료관련 참고질문 건수도 지속적으로 증가하고 있는 가운데, 공공도서관사서는 이러한 유형의 참고서비스를 수행하는데 많은 한계를 느끼고 있다. 이에 본 연구에서는 공공도서관, 의학도서관, 의료기관, 건강 및 의료관련 커뮤니티, 기타 의료정보서비스를 제공하는 모든 관련기관들이 협력하여 건강정보서비스를 제공하는 CHI서비스 활성화를 위한 협력네트워크시스템 구축모형을 제안하였다. 협력모형의 핵심 요소에 해당되는 것으로 협력의 주체, 협력대상 정보원, 협력의 내용, 건강정보원 사이트의 운영, 협력센터의 운영과 역할, 그리고 상업기관과의 협력방향까지 구체적으로 제시하고 있다.

• 아태비즈니스연구
• /
• 제10권4호
• /
• pp.223-236
• /
• 2019

Governance can be defined as a concept that encompasses a series of processes including partner selection as well as control and coordination of collaboration to achieve common goals. The study examined efforts to mitigate the risks of opportunistic behaviors into partner selection, partner relationship, control mechanism, and conflict management. For cases that have achieved commercialization outputs with the participation of SMEs, data was collected and analyzed such as interviews with project managers and case records for seven months from October 2016. According to the analysis result, as the complexity increases, such as multilateral cooperation for the development of finished products, cooperation with a trusted partner rather than a partner who can perform a task well was preferred, and the process control was put ahead of the output control. Regarding the partner relationship, the relationship between the owner and the agent differed according to the point of view, and there was a lack of clear allocation of authority and responsibility as well as a reward for the result. In terms of the conflict management, most emphasis was on resolving conflicts or difficulties, and no attempt was made to utilize the positive aspects of the conflict. The structure of most industry-university-institute cooperation organizations is simply composed of the host and participating organizations, and the management regulations should be amended for companies, that put actual funds and use the outputs, to have the authority and responsibility as the owners, and be allowed to use the governance elements appropriately to take the lead as consumers.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.491-496
• /
• 2012

There are several protective relays used to protect DC traction power supply system for DC railway. These relays, however, are made by different manufactures and they have different ways for their operations. Therefore, there are difficulties for cooperation between the devices or the devices and an upper system. In order to increase interoperability and stability of the system composed of devices made by different manufactures, IEC 61850 international standards are applied to design logical nodes for modeling protective elements used in protective relays.

• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.62-68
• /
• 2014

We proposed a series connection-type superconducting fault current limiter(SFCL) using E-I core that can prevent the internal magnetic flux generation of cores during normal operation, and prevent the saturation of cores due to a sudden magnetic flux generation at the initial stage of fault occurrence while limiting the peak current. Through a short-circuit simulation experiment, we analyzed the operating status of the two superconducting elements and limiting characteristics according to the size of the fault current peak before and after the failure. Further, the double peak current limiting characteristics according to the winding directions as well as the current and the voltage of each coil were compared and analyzed.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 추계산학기술 심포지엄 및 학술대회 발표논문집
• /
• pp.104-106
• /
• 2001

This paper presents the usage of software package APM WinMachine for design of train car elements. APM software uses fur maximization of design productivity and efficiency in designing and evaluation machine elements and systems and CAD modeling. In process of machine designing needs make strength calculations of machine parts with complecated design. Will the help of APM software strength calculations can be done quickly. On the Demichovo machine-building plant with the use of APM software were made quickly and effectively strength calculations of the cradle of the suspension of air-conditioner of car train and the mounting brackets of a tank of train toilet.

• The Korean journal of internal medicine
• /
• 제39권3호
• /
• pp.373-382
• /
• 2024

This review addresses the escalating challenge posed by antibiotic resistance, highlighting its profound impact on global public health, including increased mortality rates and healthcare expenditures. The review focuses on the need to adopt the One Health approach to effectively manage antibiotic usage across human, animal, and environmental domains. Antimicrobial stewardship programs (ASPs) are considered as comprehensive strategies that encompass both core and supplementary initiatives aimed at enhancing prudent antibiotic use. The 2021 "Guidelines on Implementing ASP in Korea" introduced such strategies, with a strong emphasis on fostering multidisciplinary and collaborative efforts. Furthermore, the "Core Elements for Implementing ASPs in Korean General Hospitals," established in 2022, provide a structured framework for ASPs, delineating leadership responsibilities, the composition of interdisciplinary ASP teams, a range of interventions, and continuous monitoring and reporting mechanisms. In addition, this review examines patient-centric campaigns such as "Speak Up, Get Smart" and emphasizes the pivotal role of a multidisciplinary approach and international cooperation in addressing the multifaceted challenges associated with antibiotic resistance.

• 한국보건간호학회지
• /
• 제7권1호
• /
• pp.17-29
• /
• 1993

Nursing centers are nurse-managed organizations that give the client direct access to professional nursing services. Academic nursing centers are faculty-created and -organized nursing centers integrated into nursing school or cooperated with community nursing center. Academic nursing centers are needed for providing services to the forgotten or underserved populations in the community, providing learning opportunities for nursing students and practice opportunities for faculties. The intent of this study is to identify the elements needed in developing process and operations of acedemic nursing center for elderlies and the disabled, and to present the desired model for academic nursing center. The processes of my study were : 1) The articles of the academic nursing centers in U. S. were reviewed and analysed. 2) The academic nursing center for elderlies and the disabled was developed and operated in my paper. 3) Desired model for academic nursing center was presented in my paper. The followings are the results of my study: 1. Elements needed in developing process of academic nursing center were philosophy and goals, the community support, assessment of the validity of the service and health needs, identification of the service contents, roles and responsibilities, communication lines, finances for facilities and operations, cooperation with resources, and developing record system. 2. Elements needed in operations of academic nursing center were the structural organizations, realization of the above philosophy and goals, development of policy and nursing standards, faculty participation, continuity of services, and financial solutions. 3. The desired model was presented according to the process and operations.

• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.200-207
• /
• 2024

A multi-component force sensor has been developed to measure force and moment components in high-speed flow media for submerged models. The size of the test model is determined based on the Reynolds number of the model at the test speed and expected blockage effect. A two-component force sensor unit has been created by assembling pairs of column elements arranged symmetrically under an eccentric load. The six-component force sensor is constructed with symmetric arrangements of two-component force sensor units in a rectangular plane. The signals generated from the strain gauges attached to the surface of the elements can be converted into force signals. The performance of the waterproof six-component force sensor has been evaluated through calibration. A simplified interference decomposition procedure has been introduced to increase the accuracy of measurement.