• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1889-1896
• /
• 2011

There has been a lot of researches to develop techniques that provide redundant paths, there by making Multistage Interconnection Networks(MINs) fault tolerant. So far, the redundant paths in MINs have been realized by adding additional hardware such as extra stages or duplicated data links. This paper presents a new MIN topology called Hierarchical MIN. The proposed MIN is constructed with 2.5N-4 switching elements, which are much fewer than that of the classical MINs. Even though there are fewer hardware than the classical MINs, the HMIN possesses the property of full access and also provides alternative paths for the fault tolerant. Furthermore, since there is the short cut in HMIN for the localized communication, it takes advantage of exploiting the locality of reference in multiprocessor systems. Its performance under varying degrees of localized communication is analysed and simulated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1027-1032
• /
• 2013

LED is standing in the limelight as a light part of the low-carbon green energy. While LEDs are eco-friendly, efficient and durable, extreme heat rises can cause their durability to decrease, with 80% of the power supply being turned into heat energy. Heat radiation systems are important because rising temperatures affect the lifetime of LED elements. Therefore, in this paper, thermal analysis was performed for the shape of heat sink to the LED bulb. Also, it is applied the temperature control systems to our products for optimal performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1078-1085
• /
• 2006

In earthing technologies, the intrusion of the surge wave can be protected when the earthing resistance is as low as several ohms. However, the cost fer realizing such a low resistance is quite high. Therefore it is important to determine appropriate target value of the earthing resistance to install cost-effective grounding system. In this work, we have proposed an optimization method of the earthing resistance according to the various environmental parameters by using a numerical simulator We have also developed new catalyst composed of water-soluble alkaline elements and activated carbon and investigated its electrical characteristics for enhancement of the earthing qualities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3295-3300
• /
• 2012

Three Dimensional finite element method (FEM) was used to obtain the stress intensity factor for subsurface cracks and surface cracks existing in inhomogeneous materials. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model. Nodes are generated by the bubble packing, and ten-noded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. To examine accuracy and efficiency of the present system, the stress intensity factor for a semi-elliptical surface crack in a plate subjected to uniform tension is calculated, and compared with Raju-Newman's solutions. Then the system is applied to analyze interaction effects of two dissimilar semi-elliptical cracks in a plate subjected to uniform tension.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2019

The Industrial Innovation Movement, based on win-win cooperation with SMEs, is a structure that enables suppliers who have struggled with corporate growth through productivity innovation due to poor manufacturing environment and lack of innovation. To this end, consultants and technical experts will support production innovation activities to improve production methods and improve productivity through process and management consulting. The purpose of this study was to explore the driving factors of the industrial innovation movement to improve the corporate ecosystem by improving the productivity of SMEs using modified IPA. The research results are as follows. First, in order to revitalize the Industrial Innovation Movement, the CEO-related elements of the participating companies should be maintained and strengthened. The motivation, education support, innovation organizational culture, the establishment of an innovation promotion system requires centralization of efforts for improvement. Second, in order to revitalize the Industrial Innovation Movement, the consultant's ability to analyze problems and suggest alternatives should be continuously strengthened. Third, in terms of the Central Promotion Headquarters, it was found that the Industrial Innovation Movement would be successful if the public information, industrial inspection for benchmarking, and provision of various information to support innovation activities were urgently improved.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.739-745
• /
• 2011

Beta-type alloys are the most versatile class of titanium alloys. They offer the highest strength to weight ratios and very attractive combinations of strength, toughness, and fatigue resistance inlarge cross sections [1]. The present study was made to obtain useful information for the design of ${\beta}$-type titanium alloys with high-strength properties by using the $DV-X{\alpha}$ method. Employing two calculated parameters, the bond order (Bo) and the d-orbital energy level (Md) of alloying elements in ${\beta}$-type titanium alloy was introduced and used for prediction of mechanical properties. Thus, high-strength titanium alloys were designed by calculating the Md and Bo values of the previous and present titanium alloys.

• Health Policy and Management
• /
• v.33 no.2
• /
• pp.203-213
• /
• 2023

This study examined the trend of healthcare status and compared the status of South Korea and other member of the Organization for Economic Cooperation and Development (OECD) using the OECD health statistics 2022. We used the OECD health statistics from 2022 and a position value for relative comparison (PARC) index to compare the five elements of the healthcare system. The study also used a Mann-Kendall test to analyze the trend of the PARC values from 2000 to the present year. The findings of the study indicate that many South Korea's PARC values were higher than the OECD median. But practicing physician in supply part and medical cost were lower than OECD median but the trend significantly increased. Medical accessibility part and quality of care part except primary care, and mental health had a high relative position but the trend did not increased significantly. After outbreak of coronavirus disease 2019, there were changes in medical accessibility. Health screening and vaccinations showed an overall decline in 2020 compared to 2019. These results suggest that policymakers need to take necessary steps for a sustainable healthcare system in the country.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.2
• /
• pp.75-89
• /
• 2009

This study propose the union cataloging based on wiki cataloging method which guarantee the quality of imported bibliographic data by outsourcing. Wiki cataloging means to improves a quality of union catalog used the cooperation of librarians who have the knowledge and experience to the cataloging. The methods are 1) policy of wiki cataloging 2) development of wiki systems 3) establishment of wiki cataloging rule based on advanced librarian cooperation. Especially, advanced librarian take charge of an 245, 260, 300 fields as basic bibliographical elements, general librarians participate expanded fields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.394-399
• /
• 2016

This study examines how the patent results of the University Academic-Industrial Cooperation influence technology transfer. Statistical analysis was performed by using 2013 panel data from the Ministry of Education and Science Technology(MEST) National Research Foundation of Korea(NRF) and the results are as follows. The results show that the patent result factors that have a positive effect on the total number of technology transfers are domestic patent application numbers, foreign patent application numbers, future technology(6T) patent application numbers, science technology patent application numbers. The factors that have a positive effect on increasing royalty are the total number of technology transfers. Domestic patent application numbers, future technology(6T) patent application numbers and science technology patent application numbers have a positive effect on patent results. The results implicate that more research and development is needed for more patents to be applied, that the main focus should be on future technology(6T) and science technology fields, and that effort should be directed at planning negotiation strategies for the term of the contract. However, this study is the need to research, including primary research is so patent performance may be limited in having only been considered in future studies of human and material resources and operating system factors that may be presented to the essential elements of the Industry-Academic Cooperation Foundation this raises.

• Journal of Distribution Science
• /
• v.13 no.12
• /
• pp.65-71
• /
• 2015

Purpose - Domestic cooperatives tend to increase during the establishment of cooperatives and gradually through the basic law of social needs. However, only cooperatives' qualitative grow this secured without blessings, and their quantitative growth through government support is questionable. The purpose of this study is to analyze the agricultural cooperatives established through the Distribution System Cooperatives Basic Law, which was enacted in January 2012. Subsequently, establishing agricultural cooperatives was done briskly. However, cooperatives established rapidly after the founding of the Basic Law encountered problems. Research design, data, and methodology - To assess the performance of selected agricultural cooperatives, data were analyzed using the methodological Analytic Hierarchy Process (AHP) approach. The AHP is a set of systematic procedures to hierarchically analyze the elements of any problem. Using a survey on expertise, a series of comparative determinations of each pair is performed to evaluate the relative strengths and the strengths of the impact between elements within the hierarchy. A survey was conducted on 10 small agricultural cooperatives using AHP analysis for the examination. The purpose of such research and analysis is to recommend a direction for future policies aimed at small agricultural cooperatives. Result - This study applied three types of policy evaluation criterion, including market expansions, organizations, and cooperative projects, and 12 types of small agricultural cooperative policy measures. Market expansion policies for agricultural cooperatives are classified into four categories: school meals, direct transactions, shopping malls, and wholesale markets. Organizational policies for agricultural cooperatives are classified into four types: existing sales channel management, education, preventing free riding, and enlarging members. Cooperative project policies in agricultural cooperatives are classified into four policy areas: cooperation between cooperatives, community contribution, joint businesses, and government links. In this paper, the growth priority in agricultural cooperative policies is analyzed by applying policy evaluation criteria on the basis of a survey on expertise. The priorities of the policy program are also analyzed using a decision analytic hierarchy process. The results indicate that market expansion is the most important policy evaluation criterion therefore, improving direct transactions, school meals, management of existing sales channels, and shopping malls are crucial policy measures. In contrast, the cooperation of cooperatives, expansion of union members, and cooperation with the government were found to have low priority. Conclusions - Agricultural cooperatives should develop plans as follows. Small agricultural cooperatives need to secure school meals and direct transactions for market expansion, restructure marketing strategies to manage existing sales channels, and, finally, increase education and training for sustainable organizational development. This study has the following limitations. Because the subject of the investigation is a new cooperative, determining its sustainable growth is difficult. Therefore, through analysis and a continuous study of cooperatives, future research is expected to show that modifying the direction of agriculture cooperatives is necessary.