• Journal of Advanced Marine Engineering and Technology
• /
• 제14권4호
• /
• pp.57-66
• /
• 1990

In the design of an electric power plant, the capacity to meet the peak load demand is one of the important factors to be considered. This peak load usually occurs when the most of the cooling air conditioning systems are being operated during daytime in summer season, which inevitably entails the construction of an additional electric power plant. This study is aimed to carry out a basic experiment for the development of a cooling air conditioning system using the ice energy by the surplus electric power during the night-time. The experimental apparatus consists of four major parts; (1) the heating section consisting of the air duct and I.D. fan, (2) the cold section with the ice chamber, (3) the bundle of heat pipes made in a form of the staggered arrangement with ${C_y}/{d_o}$=2.0 and ${C_x}/{d_o}$=1.73, (4) the refrigerator system to cool down the ice chamber. This study involves an intensive experiment concerning the convective heat transfer of the air flow surrounding the bundle of heat pipes. This major experimental parameters are the amount of working fluid, the velocity of air and the working temperature. The major findings of the present study are as follows; (1) The optimum amount of the working fluid necessary for the horizontal heat pipes is much more than that for the vertical type. (2) The convective heat transfer coefficients of the air are coincided with the empirical equations of Grimson and ${\breve{Z}ukauskas}$. (3) The equation of the mean heat transfer coefficient obtained in the present study is ${N_um}=0.32 {Re_max^{0.63}}$.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5430-5437
• /
• 2011

본 연구의 목적은 친환경 무공해 승용 차량에 적용되는 전동식 냉방시스템의 성능특성을 실차에서 확인하는 것이다. 이를 위하여 인버터로 구동되는 전동식 스크롤 압축기를 적용한 전동식 냉방시스템을 설계 및 제작하여 수소 연료전지 자동차에 설치하여 다양한 주행도로 조건에서 실험을 진행하였다. 주행조건의 변화는 시험차량에 장착된 전동식 냉방시스템의 성능에 영향을 주었으며, 고속 및 일반도로 주행조건에서 냉방시스템의 성능이 정지조건에서 냉방시스템의 성능보다 우수하게 나타났다. 또한, 외기온도가 $20.0^{\circ}C$에서 $30.0^{\circ}C$로 증가함에 따라 고내 온도는 평균 $5.2^{\circ}C$ 더 적게 감소하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.688-692
• /
• 2005

Importance of substitute energy has been increasing due to environmental issues and lack of fossil fuels. In addition, heating cost that occupies from 30 to $40\%$ of the total production cost in Korean protected cultivation needs to be reduced for profitability and global competition. But, studying on substitute energy to solve these problems has not been activated for Korean protected cultivation. Therefore, this study was conducted to develop a geothermal heat pump system for cool ing and heat ing of greenhouses at a lower cost than conventional hot air heater and air conditioner. Fundamental test of heat transfer characteristics in soil was conducted by computer simulation and controlled tests for its verification. Based on the results of the theoretical and empirical investigations, an optimum heat pump system was developed and the performance was evaluated for practical use in a greenhouse at the Pusan Horticultural Experiment Station. The system was compared with a conventional hot air heating system through a cucumber growing test and economic feasibility analysis. Results of the application test of the geothermal heat pump showed that with an initial setting of $15^{\circ}C$ the inside temperature of the greenhouse could be maintained between 15 and $17^{\circ}C$. Results of the cucumber growing test showed that there were no significant differences in average height, leaf length, leaf width, number of nods, leaf area, dry weight and yield between the plots wi th the geothermal heat pump system and a conventional hot air heater. Economic feasibility analysis indicated that the variable cost of the hot air heater could be saved $81.2\%$ using the geothermal heat pump system. It was concluded that the geothermal heat pump system might be a pertinent heating and cooling system for greenhouses because of the low operating cost and the use of environment-friendly geothermal energy.

• 한국화재소방학회논문지
• /
• 제24권1호
• /
• pp.116-121
• /
• 2010

n-dodecane 연료 액적의 고온면 점화특성을 파악하기 위해 본 연구에서는 공기의 공급과 제어가 가능한 실험실 규모의 실험 장치를 제작하였다. 표면온도는 적외선 측정법에 의해 계측되었으며 적외선 측정법에 의해 계측된 온도는 k-type 열전대에 의해 측정된 온도와 비교하여 $10^{\circ}C$ 이내의 오차를 보였다. 각 공기 공급유량에 대하여 약 400회의 점화실험이 수행되었으며 점화실험결과로부터 점화확률 분포와 최소 점화온도에 관한 결과를 얻었다. 공기 공급유량이 3.0lpm인 경우를 제외하고 냉염과 열염 점화특성을 보였으며 공기 공급유량에 따라 냉염점화가 일어나는 온도범위가 큰 차이를 보였다. 실험결과 n-dodecane 연료의 최소고온면점화온도(MHSIT)는 공기공급 유량이 0.5lpm인 경우에 대하여 약 $300^{\circ}C$를 나타냈다. 본 연구에서는 외기조건에 따른 점화특성을 파악함으로써 초기 발화 메커니즘을 이해하고 조기화재 진압을 위한 시스템 설계의 기초적 자료로 활용된다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권2호
• /
• pp.51-60
• /
• 2003

In the nuclear power plant, emergency core coolant system (ECCS) is furnished at reactor coolant system (RCS) in order to cool down high temperature water in case of emergency. However, in this coolant system, thermal stratification phenomenon can occur due to coolant leaking in the check valve. The thermal stratification produces excessive thermal stresses at the pipe wall so as to yield thermal fatigue crack (TFC) accident. In the present study, effects of turbulence penetration on the thermal stratification into T-branches with square cross-section in the modeled ECCS are analysed numerically. Standard k-$\varepsilon$ model is employed to calculate the Reynolds stresses in momentum equations. Results show that the length and strength of thermal stratification are primarily affected by the leak flow rate of coolant and the Reynolds number of duct. Turbulence penetration into the T-branch of ECCS shows two counteracting effects on the thermal stratification. Heat transport by turbulence penetration from main duct to leaking flow region may enhance thermal stratification while the turbulent diffusion may weaken it.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1920-1925
• /
• 2007

A transformer is a device that changes the current and voltage by electricity induced between coil and core steel, and it is composed of metals and insulating materials. In the core of the transformer, the thermal load is generated by electric loss and the high temperature can make the break of insulating. So we must cool down the temperature of transformer by external radiators. According to cooling fan's usage, there are two cooling types, OA(Oil Natural Air Natural) and FA(Oil Natural Air Forced). For this study, we used Fluent 6.2 and analyzed the cooling characteristic of radiator. we calculated 1-fin of detail modeling that is similar to honeycomb structure and multi-fin(18-fin) calculation for OA and FA types. For the sensitivity study, we have different positions(side, under) of cooling fans for forced convection of FA type. The calculation results were compared with the measurement data which obtained from 135.45/69kV ultra transformer flowrate and temperature test. The aim of the study is to assess the Fluent code prediction on the radiator calculation and to use the data for optimizing transformer radiator design.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.43-49
• /
• 2014

This study was carried out to improve the design of an intercooler for a small marine diesel engine. Diesel engines for small marine ships have mainly been developed by changing the structure of the vehicle engine. Sea water was most commonly used in the intercooler of small marine diesel engines to cool the hot air compressed by the turbocharger. In this study, the intercooler is modeled and simulated using STAR-CCM+ in order to find optimal data for the design of an intercooler. In the results, the temperature differences between the data from a numerical analysis and experimental data were $0.38^{\circ}C$ in the hot air outlet and $3.63^{\circ}C$ in the cooling water outlet. Therefore, it was confirmed that both analysis and experimental results need to be considered when designing an intercooler. A closer degree of similarity in the two datasets can improve the confidence in the design of these intercoolers.

• 한국작물학회지
• /
• 제27권4호
• /
• pp.314-339
• /
• 1982

Fluctuating climate is still most important environmental constrain, although improved modem agricultural technology has succeeded to increase crop production in the world. To stabilize the food production under fluctuating weather conditions, it is very needed to obain the quantitative information of interactions between crops and climate. The main purpose of this paper is three hold. Using the JIBP-data, the dry matter accumulation of rice crops is studied in relation to weather indexes (\SigmaTa and \SigmaSt). Temperature dependence of the yield index of rice is analyzed as to air temperature and water temperature. \SigmaT$_{10}$ -fluctuations are studied using meteorological data at various stations. The possible shift of \SigmaT$_{10}$ -isopleths due to climate fluctuation is evaluated. The second interest is in the plant climate of rice crops. Using results of canopy photosynthesis, it is pointed that the canopy structure has most important implication in plant climate. Leaf-air, stomatal, and mesophyll resistances of rice crops are described in relation to weather conditions. The change in light condition and aerodynamical property of rice crops with the growth is illustrated. The energy partition is also studied at different growing stages. Third point is to show in more detail effective countermeasures against cold irrigation water and cool summer. Heat balance of warming pond and polyethylene tube as a heat exchanger is studied to make nomo-grams for evaluating the necessary area and necessary length. Effects of windbreak net on rice crops are illustrated by using experimental and simulation results.lts.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3293-3303
• /
• 1996

Numerical analyses have been performed to estimate the absorption heat and mass transfer coefficients in absorption process of the LiBr aqueous solution and the total heat and mass transfer rates in a vertical tube absorber which is coolING ed by air. Axisymmetric cylindrical coordinate system was adopted to model the circular tube and the transport equations were solved by the finite volume method. Absorption behaviors of heat and mass transfer were analyzed through falling film of the LiBr aqueous solution contacted by water vapor in tube. Effects of film Reynolds number on heat and mass transfer coefficients have been also investigated. Especially, effects of tube diameter have been considered to observe the total heat and mass transfer rates through falling film along the tube. Based on the analysis it has been found that the total mass transfer rate increases rapidly in a region with low film Reynolds number(10 ~ 40) as the film Reynolds number increases, while decreases beyond that region. The total heat and mass transfer rates increase with increasing the tube diameter.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.87-96
• /
• 2009

This study practically investigated the effects of the newly developed isolation-heat paints applied into the buildings and the roads in Japan. After 1970 since the gravitation of population toward the cities has got more deeply involved due to the development of industries, the increased paved roads and the heats come out from the industrial chimneys cause the heat island effect. The dark colored paints on the roads and the stagnations of air blocked by large buildings turned out to be also the main reasons for the heat island effect. Therefore, in order to cool down the heats accumulated in buildings and roads, the developed isolation-heat paints applied into several different regions and the decreased temperatures and heats were accurately measured and reported.