• Design & Manufacturing
• /
• v.15 no.4
• /
• pp.24-31
• /
• 2021

In this study, an artificial neural network model was constructed to convert CAE analysis data into similar experimental data. In the analysis and experiment, the injection molding data for 50 conditions were acquired through the design of experiment and random selection method. The injection molding conditions and the weight, height, and diameter of the product derived from CAE results were used as the input parameters for learning of the convert model. Also the product qualities of experimental results were used as the output parameters for learning of the convert model. The accuracy of the convert model showed RMSE values of 0.06g, 0.03mm, and 0.03mm in weight, height, and diameter, respectively. As the next step, additional randomly selected conditions were created and CAE analysis was performed. Then, the additional CAE analysis data were converted to similar experimental data through the conversion model. An artificial neural network model was constructed to predict the quality of injection molded product by using converted similar experimental data and injection molding experiment data. The injection molding conditions were used as input parameters for learning of the predicted model and weight, height, and diameter of the product were used as output parameters for learning. As a result of evaluating the performance of the prediction model, the predicted weight, height, and diameter showed RMSE values of 0.11g, 0.03mm, and 0.05mm and in terms of quality criteria of the target product, all of them showed accurate results satisfying the criteria range.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.3
• /
• pp.1-20
• /
• 2018

It is a very important and fundamental process to know accurately the intensity of the solar energy coming into the installed module considering the tilted angle. Europe and the US commonly use a program called PVsyst to convert the global horizontal irradiation to global irradiation on tilted plane. There are two types of models that PVsyst uses to convert to irradiation on tilted plane. In this paper, Perez model, which is a decomposition model and Perez model, which is a transposition model used in PVsyst, are applied based on global horizontal irradiation and global irradiation on tilted plane measured in a specific area. The comparison of the decomposition model shows the effect of the transpostion model on global irradiation on tilted plane conversion by comparing the ratio of the horizontal diffuse irradiation amount of the Watanabe model which are highly trusted in Asia and the Perez model. The comparison of transposition model confirm the error between the measured data and the calculated value which is applied Perez model to global horizontal irradiation decomposed by Perez model and Watanabe model. Based on the two comparisons, This paper propose a method to confirm the reliability of transposition model and reduce the error when PVsyst is used in Korea.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.169-174
• /
• 2009

In this paper, We define convert rules objects and relation presented in object model to the state and operation domain in formal specification. we implement simulation tool in order to verification method of formal specification and to consistency verified model between user's requirement. It is possible to select the suitable model and reduce the costs and efforts on software development.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.5
• /
• pp.83-92
• /
• 2011

IDEF is a widely used methodology for traditional structured software development. As object-oriented softwares are widely used, an object-oriented version of IDEF, IDEF4, is developed. UML is de facto standard for object-oriented software development methods. Whereas IDEF is widely used for CALS/EC, UML is used for general object-oriented software development. Most software developers are not familiar with IDEF4 but familiar with UML. Moreover, UML has many CASE tools. So we can develop software efficiently if we convert IDEF4 model to UML model. In this paper, we transform IDEF4 models to UML models. We explain the rules and methods to convert IDEF4 model to UML model and applied the transform methods and rules to a case study.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.78-86
• /
• 2018

The 3D mesh model is used in various fields, such as virtual reality, shape-based searching, 3D simulation, reverse engineering, 3D printing, and laser scanning. There are various formats for the 3D mesh model, but STL and OBJ are the most typical. Since application systems support different 3D mesh formats, developing technology for converting 3D mesh models from one format into another is necessary to ensure data interoperability among systems. In this paper, we propose a method to convert a 3D mesh model in STL format into the OBJ format. We performed the basic design of the conversion system and developed a prototype, then verified the proposed method by experimentally converting an STL file into an OBJ file for test cases using this prototype.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1205-1208
• /
• 1996

This paper proposes balanced model reduction of non-minimum phase plant. The algorithm presented in this paper is to convert high-order non-minimum phase plant into low-oder minimum phase plant using balanced model reduction. Balanced model reduction requires the error bound that Hankel singular value produces. This algorithm shows the tolerance that admits the method of this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.105-108
• /
• 1997

This paper proposes a new approach of balanced model reduction using matrix pencil. The algorithm presented in this paper is to convert full-rank high-order system into rank-deficient system using perturbation made by matrix pencil method. Then the system can be truncated to a low-order system that we want via balanced realization. We discuss the comparison with other methods and the various observations by simulations.

• Microbiology and Biotechnology Letters
• /
• v.27 no.2
• /
• pp.96-101
• /
• 1999

Various side-chains are introduced to the 7-amino position of 7-aminocepha-losporanic acid (7-ACA) to make semi-synthetic cephalosporin antibiotics. In order to convert cephalosporin C (CPC) to 7-ACA, two enzymatic reactions are generally imployed. Glutary1-7-aminocephalosporanic acid (Gl-7-ACA) acylase is involved in the second step where the reaction intermediate, Gl-7-ACa is converted into 7-ACA. It was recently reported that CPC amidase can convert CPC directly into 7-ACA in a single enzymatic reaction. A study was undertaken to screen microorganisms conferring enzyme activity to convert Gl-7-ACA or CPC into 7-ACA by one or two enzymatic reactions. In order to screen the microorganisms rapidly, a non-$\beta$-lactam model compund, glutaryl-$\rho$-nitroanilide, was utilized in an early stage, thereafter the selected microorganisms were examined with real substrates. One microorganism exhibiting both Gl-7-ACA acylase and CPC amidase activities was obtained by the colorimetry method and HPLC assay, and was identified as a strain of Serratia species, designated as Serratia sp. N14.4. The optimal fermentation conditions for Serratia sp. N14.4 was pH9.0 and 3$0^{\circ}C$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.838-848
• /
• 2013

The Community Multiscale Air Quality (CMAQ) model is capable of providing high quality atmospheric chemistry profiles through the utilization of high-resolution meteorology and emissions data. However, it cannot simulate air quality accurately if input data are not appropriate and reliable. One of the most important inputs required by CMAQ is the air pollutants emissions, which determines air pollutants concentrations during the simulation. For the CMAQ simulation of Korean peninsula, we, in general, use the Korean National Emission Inventory data which are estimated by Clean Air Policy Support System (CAPSS). However, since they are not provided by model-ready emission data, we should convert CAPSS emissions into model-ready data. The SMOKE is the emission model we used in this study to generate CMAQ-ready emissions. Because processing the emissions data is very monotonous and tedious work, we have developed CAPSS2SMOKE program to convert CAPSS emissions into SMOKE-ready data with ease and effective. CAPSS2SMOKE program consists of many codes and routines such as source classification code, $PM_{10}$ to $PM_{2.5}$ ratio code, map projection conversion routine, spatial allocation routine, and so on. To verify the CAPSS2SMOKE program, we have run SMOKE using the CAPSS 2009 emissions and found that the SMOKE results inherits CAPSS emissions quite well.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.402-405
• /
• 2006

Radiometric calibration of optical image data is necessary to convert raw digital number (DN) value of each pixel into a physically meaningful measurement (radiance). To extract rather quantitative information regarding biophysical characteristics of the earth surface materials, radiometric calibration is often essential procedure. A sensor detects the radiation of sunlight interacted atmospheric constituents. Therefore, the amount of the energy reaching at the sensor is quite different from the initial amount reflected from the surface. To achieve the target reflectance after atmospheric correct, an initial step is to convert DN value to at-sensor radiance. A linear model, the simplest radiometric model, is applied to averaged spectral radiance for this conversion. This study purposes to analyze the sensitivity of several factors affecting on radiance for carrying out absolute radiometric calibration of panchromatic images from KOMPSAT2 launched at July, 2006. MODTRAN is used to calculate radiance at sensor and reflectance of target is measured by a portable spectro-radiometer at the same time the satellite is passing the target for the radiometric calibration. As using different contents of materials composing of atmosphere, the differences of radiance are investigated. Because the spectral sensitivity of panchromatic images of KOMPSAT2 ranges from 500 to 900 nm, the materials causing scattering in visible range are mainly considered to analyze the sensitivity. According to the verified sensitivity, direct measurement can be recommenced for absolute radiometric calibration.