• Tuberculosis and Respiratory Diseases
• /
• v.83 no.1
• /
• pp.96-103
• /
• 2020

Background: The aim of this study was to investigate the effectiveness of intravenous isoniazid (H) and ethambutol (E) administered in patients with new sputum positive drug-susceptible pulmonary tuberculosis (TB) with tuberculous meningoencephalitis (TM) and human immunodeficiency virus (HIV) co-infection in the intensive phase of treatment. Methods: Fifty-four patients with TB/TM and HIV co-infection were enrolled for this study. Group 1 comprised of 23 patients treated with E and H intravenously, while rifampicin and pyrazinamide were prescribed orally. Group 2 consisted of 31 patients treated with the first-line anti-TB drugs orally. The concentrations of H and E in blood serum were detected using a chromatographic method. Results: A significant improvement in the clinical symptoms and X-ray signs in patients treated intravenously with H and E was observed and compared to group 2. The sputum Mycobacterium tuberculosis positivity was observed during the second month of the treatment in 25.0% of patients from group 1 and 76.1% of the patients from the control group (p=0.003). In addition, nine patients (39.1%) died up to 6 months when H and E were prescribed intravenously compared with 22 (70.9%) in group 2 (p=0.023). Conclusion: In TB/TM with HIV, the intravenous H and E treatment was more effective than oral H and E treatment at 2 months of intensive treatment in sputum conversion as well as in clinical improvement, accompanied by significantly higher mean serum concentrations. In addition, the mortality rate was lower in intravenous H and E treatment compared to oral treatment.

• The KIPS Transactions:PartB
• /
• v.14B no.2
• /
• pp.65-70
• /
• 2007

Red tide is becoming hot issue of environmental problem worldwide since the 1990. Advanced nations, are progressing study that detect red tide area on early time using satellite for sea. But, our country most seashores bends serious. Also because there are a lot of turbid method streams on coast, hard to detect small red tide area by satellite for sea that is low resolution. Also, method by sea color that use one feature of satellite image for sea of existent red tide area detection was most. In this way, have a few feature in image with sea color and it can cause false negative mistake that detect red tide area. Therefore, in this paper, acquired texture information to use GLCM(Gray Level Co occurrence Matrix)'s texture 6 information about high definition land satellite south Coast image. Removed needless component reducing dimension through principal component analysis from this information. And changed into 2 principal component accumulation images, Experiment result 2 principal component conversion accumulation image's eigenvalues were 94.6%. When component with red tide area that uses only sea color image and all principal component image. displayed more correct result. And divided as quantitative,, it compares with turbid stream and the sea that red tide does not exist using statistical feature analysis about texture.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.29-33
• /
• 2020

Despite the same system architecture and operation principle, Advanced Metering Infrastructure (AMI) and Internet of Things (IoT) are recognized as a heterogeneous system. This is due to the different object modeling and communication protocols used in smart meters and sensors. However, data interworking between AMI and IoT is expected to be inevitable in the future. In this paper, we propose Device Language Message Specification (DLMS) to Lightweight Machine to Machine (LwM2M) conversion model. The proposed interworking model can reduce the packet size by 46.5% compared to that of the encapsulation method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.102-107
• /
• 2003

This study puts focus on the optimization of growth temperature of CIGS absorber layer which affects severely the performance of solar cells. The CIGS absorber layers were prepared by three-stage co-evaporation of metal elements in the order of In-Ga-Se. The effect of the growth temperature of 1st stage was found not to be so important, and 350$^{\circ}C$ to be the lowest optimum temperature. In the case of growth temperature at 2nd/3rd stage, the optimum temperature was revealed to be 550$^{\circ}C$. The XRD results of CIGS films showed a strong (112) preferred orientation and the Raman spectra of CIGS films showed only the Al mode peak at 173cm$\^$-1/. Scanning electron microscopy results revealed very small grains at 2nd/3rd stage growth temperature of 480$^{\circ}C$. At higher temperatures, the grain size increased together with a reduction in the number of the voids. The optimization of experimental parameters above mentioned, through the repeated fabrication and characterization of unit layers and devices, led to the highest conversion efficiency of 15.4% from CIGS-based thin film solar cell with a structure of Al/ZnO/CdS/CIGS/Mo/glass.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.375-382
• /
• 2015

Ginsenosides (ginseng saponin) as the one of important pharmaceutical compounds of ginseng and is responsible for the pharmacological and biological activities. These ginsenoside produces diverse small molecules ginsenoside which have more pharmacological activities including anti-wrinkle, anti-cancer and anti-oxidant effects. In the present study, we isolated bacteria using esculin agar, to produce ${\beta}$-glucosidase, and we focused on the bio-transformation of ginsenoside. Phylogenetic tree analysis was performed by comparing the 16S rRNA sequences; we identified the strain as Stenotrophomonas rhizopilae strain GFC09. In order to determine the optimal conditions for enzyme activity, the crude enzyme was incubated with 1 mM ginsenoside $Rb_1$. Bioconversion of ginsenoside $Rb_1$ were analyzed using TLC and HPLC. The crude enzyme hydrolyzed the ginsenoside $Rb_1$ along the following pathway: LB: $Rb_1{\rightarrow}Rd{\rightarrow}F_2$ into compound K, TSB: $Rb_1{\rightarrow}Rd{\rightarrow}F_2$. The structure of the hydrolyzed metabolites were identified by NMR. The activity screening tests showed that the conversion product induced the production of type I procollagen in a dose-dependent manner. These results suggested that hydrolyzed ginseng product containing the ginsenoside $F_2$ and compound K could be useful as an active ingredient for wrinkle-care cosmetics.

• Korean Journal of Poultry Science
• /
• v.34 no.2
• /
• pp.143-149
• /
• 2007

The experiment was conducted to examine the effects of dietary organic selenium and vitamin E on weight gain, feed intake, feed conversion, and selenium retention in meat of broiler chickens. For each growth phase, the basal diet was supplemented with 0 (control), vitamin E 150 IU/kg and the combination of 1.2 ppm Se from selenium yeast (SY) and vitamin E 100, 150, 200 and 300 IU/kg. Weight gain was significantly higher in supplemental control and vitamin E 150 compared to the combination of 1.2 ppm SY and vitamin E 150 IU during day 1 to 21. Feed intake significantly(P<0.05) increased in supplemental vitamin E 150 compared to the combination of 1.2 ppm SY and vitamin E 150 and 200 IU during day 1 to 21. Feed intake was significantly(P<0.05) higher in control compared to that of combination of 1.2 ppm SY and vitamin E 200 IU during day 21 to 35. However feed conversion was not affected in supplemental vitamin E and SY during day 1 to 35. Selenium concentrations of breast muscle and liver tissue significantly increased (P<0.05) in supplemental combination of 1.2 ppm SY and vitamin E compared to the control and vitamin E 150 IU. TBARS of control and vitamin E 150 IU were significantly (P<0.05) higher in day 3 than day 1, but the combination of Se 1.2 ppm and vitamin E of TBARS had no difference during day 1 to 3. TBARS in day 3 was significantly (P<0.05) lower in supplemental combination of Se 1.2 ppm and vitamin E than control and vitamin E 150 IU.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.281-288
• /
• 2016

The natural moving objects are the most non-rigid shapes with randomly time-varying deformation, and its types also very diverse. Methods of non-rigid shape reconstruction have widely applied in field of movie or game industry in recent years. However, a realistic approach requires moving object to stick many beacon sets. To resolve this drawback, non-rigid shape reconstruction researches from input video without beacon sets are investigated in multimedia application fields. In this regard, our paper propose novel CPSRF(Chained Partial Stereo Rigid Factorization) algorithm that can reconstruct a non-rigid 3D shape. Our method is focused on the real-time reconstruction of non-rigid 3D shape and motion from stereo 2D video sequences per frame. And we do not constrain that the deformation of the time-varying non-rigid shape is limited by a Gaussian distribution. The experimental results show that the 3D reconstruction performance of the proposed CPSRF method is superior to that of the previous method which does not consider the random deformation of shape.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.33-41
• /
• 1993

The objectives of this experiment performed were to determine the potential using of solar radiation to destroy organic contaminants in water by photolysis and to develop the process and improve its performance. We used lab, scale of recirculation photoreactor with 30, 50, 80ppm initial concentration of TCE and Ti $O_2$ anatase, respectively. Adsorption constant, reaction constant were obtained and compared using the Langmuir-Hinshelwood kinetics equation. Ti $O_2$ anatase demonstrated the highest conversion ratio co TCE among Ti $O_2$ anatase, ZnO and F $e_2$ $O_3$ in this experiment. It was shown that in case of two component system, TCE+ phenol, as the concentration of phenol increased in the feed solution, TCE decomposition rate decreased.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.47-52
• /
• 2013

In this study, the catalytic performance and characterization of $Ni/Ce_xZr_{1-x}O_2$ were investigated using an autothermal reforming (ATR) process for hydrogen production. The $Ni/Ce_xZr_{1-x}O_2$ catalysts were prepared using the following methods: the water method (CZ-W), urea water method (CZ-UW) and urea, water and ethanol method (CZ-UWA). The performance of $Ni/Ce_xZr_{1-x}O_2$ catalysts in autothermal reforming of propane for hydrogen production was studied in a fixed-bed flow reactor. Reaction tests were conducted by using a feed of $H_2O/C_3H_8/O_2$=3/1/0.37 and $300{\sim}700^{\circ}C$. The CZ-UW and CZ-UWA catalysts showed higher propane conversion and hydrogen yield than the CZ-W catalyst. The activity test confirmed that the improvement in the water-ethanol catalyst was due to the low level of carbon deposition. SEM showed that the surface carbon consisted of clusters on the used CZ-UW catalyst, which is incontrast to the nano-fiber morphology observed on the used CZ-UWA catalyst. It was found that the amount of carbon deposition depends on the preparation method. Especially the $Ni/Ce_{0.75}Zr_{0.25}O_2$ was showed higher propane conversion and hydrogen yield than the other catalysts. Also TGA showed that the resistance of carbon deposition increase to Co addition.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.37.2-37.2
• /
• 2016

There exist scaling relations that link the mass of supermassive black holes with both the velocity dispersion and the mass of the central stellar cusp of their host galaxies. This implies that galaxies co-evolve with their central black holes, potentially through the feedback from actively accreting supermassive black holes (AGN). We use integral field spectroscopy data from the 8.2m Gemini-North telescope to investigate ionized gas outflows in luminous local (z<0.1) Type 2 AGN. Our sample of 6 galaxies was selected based on their [OIII] dust-corrected luminosity (>$10^{42}erg/s$) and signatures of outflows in the [OIII] line profile of their SDSS spectra. These are arguably the best candidates to explore AGN feedback in action since they are < 1% of a large local type 2 AGN SDSS sample selected based on their [OIII] kinematics. Expanding on previously reported results concerning the kinematic decomposition and size determination of these outflows, here we report their photoionization properties and energetics. We find strong evidence that connect the extreme kinematics of the ionized gas with AGN photoionization. The kinematic component related to the AGN-driven outflow is clearly separated from other kinematic components, such as gravitation- or stellar-driven motions, on the velocity and velocity dispersion diagram. Our spatially resolved kinematic analysis reveals that up to 90% of the mass and kinetic energy of the outflow is contained within the central kiloparcec of the galaxy. The total mass and kinetic energy of the outflow correlate well with the AGN bolometric luminosity, resulting in energy conversion efficiencies between 0.01% and 1%. Intriguingly, we detect ubiquitous signs of ongoing circumnuclear star formation. Their small size, the centrally contained mass and energy, and the universally detected circumnuclear star formation cast doubts on the potency of these AGN-driven outflows as agents of negative feedback.