• Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.208-216
• /
• 2006

In order to create a single flocculant/dual flocculation system, polyacrylamide-co-trimethyl ammonium ethyl acrylate chloride (TAEAC) polymers with varying molecular weights and structures were prepared for use of flocculants. The higher the cationic density of the polymer is higher, the higher was the conversion rate and the ratio of monomer. An acrylamide as nonionic monomer was less reactive than a TAEAC as cationic monomer. The branched polymer which was polymerized with a cross-linking agent, N, N-methylene bis-acrylamide had a higher stability and higher viscosity than a linear polymer but its dewatering efficiency was poor in a single flocculation system. In the case of single flocculant/dual flocculation, the branched polymer has better flocculation efficiency and the water content of the dewatered cakes was lower than the others, as the result of a re-flocculation effect. The optimum conditions for dual flocculation are a sequence in which the $1^{st}$ and $2^{nd}$ dosage are 75% and 25%/total dosage of a single flocculation system. The dewatering efficiency of a dual flocculation system is improved considerably from 10 to 25% under the experimental conditions used herein.

• Carbon letters
• /
• v.4 no.4
• /
• pp.185-191
• /
• 2003

Two types of carbon fiber based high modulus- and isotropic-pitch were exposed to isothermal oxidation in air and $CO_2$ gas and the weight change was measured by TGA apparatus. The kinetic equation was introduced $f=1-{\exp}(-at^b)$ and the constant b was obtained in the range of 1.02~1.68 for the isotropic fiber and obtained 0.91~1.93 for the high modulus fiber respectively. In considering the effect of the atmosphere for isothermal oxidation, the value of the constant b obtained in the carbon dioxide was higher than that obtained in the air. Therefore, it was found that the pitch based carbon fiber shows sigmoidal characteristic when it is oxidized in the carbon dioxide. In addition, it was also found that $k_f = 0.5$, which was reaction constant at f = 0.5, was a very useful parameter for evaluation of the oxidation reactivity of pitch based carbon fibers. According to the consideration, it is suggested that the conversion-time curves of the pitch based carbon fibers are correlated by normalized equation $f=1-{\exp}(-A{\tau}^B)$, where ${\tau}=t/t_f= 0.5$.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.530-534
• /
• 2011

The synthesis of dimethyl carbonate by liquid phase oxidative carbonylation of methanol was studied under batch reaction system. Reaction factors such as effect on various metals, anion containing in copper catalyst, temperature, carbon monoxide and oxygen molar ratio and copper content were investigated. In particular $CuCl_2{\cdot}2H_2O$ showed the excellent of the methanol conversion 65.2%, DMC selectivity 96.6% reaction condition under 1.0 g, $150^{\circ}C$, MeOH/CO/$O_2$=0.2/0.215/0.05 (molar ratio). $CuCl_2$ led to corrosion of the reactor. Thus, a new catalyst system using supports was investigated to resolve these corrosion problem. Influence on various supports were examined and copper catalyst supported on zeolite Y showed the most excellent activity on the formation of dimethyl carbonate. The amount of Fe dissolved during the reaction using ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometer) was compared with catalysts, calcined Cu/zeolite Y showed the lower value below 5% than $CuCl_2-2H_2O$.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.5
• /
• pp.363-370
• /
• 2013

Small scale hydropower is one of most attractive and cost-effective energy technologies for installation within sewage treatment plants. This study was conducted to evaluate the potential of a semi-kaplan micro-hydropower (MHP) system for application to sewage treatment plants with high flow fluctuations and a low head. The semi-kaplan MHP is equipped with an adjustable runner blade, and is without a guide vane, so as to reduce the incidence of mechanical problems. A MHP rating 13.4 kWp with a semi-kaplan turbine has been considered for Kiheung Respia sewage treatment plant, and this installation is estimated to generate 86.8 MWh of electricity annually, which is enough to supply electricity to over 25 households, and equivalent to an annual reduction of 49 ton $CO_2$. The semi-kaplan turbine showed a 90.2% energy conversion efficiency at the design flow rate of 0.35 $m^3/s$ and net head of 4.7 m, and was adaptable to a wide range of flow fluctuations. Through the MHP operation, approximately 2.1% of total electricity demand of Kiheung Respia sewage treatment plant will be achievable. Based on financial analysis, an exploiting MHP is considered economically acceptable with an internal rate of return of 6.1%, net present value of 15,539,000 Korean Won, benefit-cost ratio of 1.08, and payback year of 15.5, respectively, if initial investment cost is 200,000,000 Korean Won.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.67-70
• /
• 2022

In the present work, we have designed to optimize the optical filter structures of the 1-dimensional photonic quasicrystals (1D PQCs) characteristic for the COVID-19 UV sterilization. The simulator using MATLAB program and ourselves manufacturing calculation codes. After making the aperiodic (and complexed) multi-layer structure model, we establish the transfer matrix method (TMM) for model by the operator conversion. By the using the MATLAB, we derive a matrix for the designed complexed multi-layer structure by applying the equations to the model by obtaining the reflectance and transmittance from the matrix. We also prove the possibility of application in optical filter for UV sterilization.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.8
• /
• pp.1197-1205
• /
• 2006

This experiment was conducted to compare the effects of feeding DL-2-hydroxy-4-(methylthio)butanoic acid (HMTBA) and DL-methionine (DLM) supplemented corn-soybean-cottonseed meal diets on growth performance, carcass composition, and muscle color of broilers. The trial was designed as a $2{\times}3{\times}2$ factorial experiment, including two methionine (Met) sources (HMTBA and DLM), three equimolar graded levels of Met supplementation (i.e., 0.08, 0.16, and 0.24% in the starter diet and 0.07, 0.14, and 0.21% in the grower and finisher diets, respectively), and two sexes (male and female). Additionally, one basal diet for each sex was formulated to be limiting in Met to test the dosage response of increasing supplemental Met levels. Four hundred and twenty 10-d-old broilers were randomly allotted to 14 treatments (seven each for males and females), with five replicate pens per treatment and six chicks per pen. There was no difference (p>0.05) between the two Met sources in growth performance and muscle deposition of broilers throughout the whole experimental period (d 10 to 49). With the increasing Met supplementation levels, average daily gain was increased (quadratic; p<0.01) during the starter, grower, and overall phases, average daily feed intake was increased (quadratic; p<0.01) during the starter phase, and feed:gain ratio was decreased (quadratic; p<0.05) during the grower and overall phases. At the end of finisher phase, Met supplementation increased breast muscle content (quadratic; p<0.01) and thigh muscle content (linear; p<0.05), and decreased abdominal fat content (quadratic; p<0.02). Compared to the broiler fed DLM, broilers fed HMTBA had superior breast and thigh muscle coloration (p<0.01). Male broilers had higher weight gain and feed intake and better feed conversion than female broilers (p<0.01). The fat content of thigh muscle in female broilers was higher than that of male broilers (p<0.03). The best fit comparison of HMTBA vs. DLM was determined by Schwarz Bayesian Criteria index, which indicated that the average relative bioefficacy of HMTBA vs. DLM was 120% with 95% confidence limit 67 to 172%. These results indicated that Met supplementation improved growth performance and carcass quality of broilers fed corn-soybean-cottonseed meal diets irrespective of Met sources. Compared to DLM, HMTBA has the same molar bioefficacy on improving the growth performance and carcass quality of broilers; however, HMTBA fed birds had superior meat color to DLM fed birds.

• Journal of Animal Science and Technology
• /
• v.66 no.2
• /
• pp.326-339
• /
• 2024

This study was conducted to investigate the effects of protease supplementation and different nutrient density of diets in growing-finishing pigs. A total of one hundred-eight crossbred growing pigs ([Landrace × Yorkshire] × Duroc) with an initial body weight (BW; 18.74 ± 3.46 kg) were used for 15 weeks. Pigs were randomly assigned to six dietary treatments with 6 replicates of 3 pigs per pen in a 3 × 2 factorial through the following arrangement: Three groups of protease (1, Basal diets; 2, Protease A: 125 mg/kg protease derived from Streptomyces sps; 3, Protease B: 100 mg/kg protease derived from Bacillus licheniformis) at two different nutrient density diets (1, Basal requirement; 2, 0.94%-0.98% higher than requirement in dietary protein and 50 kcal/kg in energy). High nutrient (HN) diets showed higher average daily gain (ADG) (p < 0.05) and apparent total tract digestibility (ATTD) of crude protein (CP) (p < .0001) compared to basal nutrient (BN) diets during growing periods. Supplementation of protease showed higher BW (p < 0.05) and ADG (p < 0.05) compared to non-supplementation of protease during growing periods. Also, supplementation of protease showed higher ATTD of CP (p < 0.01), ATTD of gross energy (p < 0.05) and decreased blood urea nitrogen (BUN) level (p = 0.001) compared to non-supplementation of protease during finishing periods. Pigs which fed the protease showed decreased ammonia (NH₃) emissions (p < 0.05) during experiment periods and decreased hydrogen sulfide (H₂S) emissions (p < 0.01) during finishing periods. Interactions between nutrient density and protease were observed, which decreased the feed conversion ratio (p < 0.05) in HN diets without protease compared to BN diets without protease during weeks 4 to 6. Also, interaction between nutrient density and protease was observed, which resulted in improved ATTD of CP (p < 0.01) in response to PTA supplementation with HN diets during the finishing period. In conclusion, supplementation of protease reduces NH₃ in feces and BUN in whole blood by increasing the digestibility of CP and improves growth performance. Also, diets with high nutrient density improved growth performance and nutrient digestibility in growing periods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.564-572
• /
• 2013

Two trials were conducted to investigate the effect of decreasing the crude protein (CP) content of diets for finishing pigs containing two levels of available lysine on nutrient digestibility, nitrogen (N) balance and production performance. Ten finishing diets containing five levels of CP (on average 144, 155, 168, 182 and 193 g/kg fresh basis) and two levels of available lysine (6.9 and 8.2 g/kg fresh basis) were formulated. The diets were offered to pigs on a performance trial (n = 800 Large White (LW)${\times}$Landrace (LR) pigs) from 10 wk of age until finish at 21 wks+5 d of age. Average daily gain (ADG), average daily feed intake (ADFI) and feed conversion ratio (FCR) were calculated. In addition, a digestibility/N balance trial was conducted using pigs (n = 80 $LW{\times}LR$) housed in metabolism crates. Digestibility of dry matter (DM), CP, oil, fibre and energy was determined. N balance values were determined through analysis of N content of urine and faeces ('as determined'). N balance values were also calculated using ADG values and assuming that 16% of growth is protein deposition ("as calculated"). Pig performance was poor between 10 and 13 wk of age which indicated that the dietary treatments were nutritionally inadequate for pigs less than 40 kg. There was a significant (p<0.01) quadratic effect of increasing CP level on feed intake, ADG and FCR from 10 to 13 wk which indicated that the lower CP levels did not supply adequate levels of essential or non-essential amino acids. There was no effect of increasing available lysine level throughout the early period, which in conjunction with the response in older pigs, suggested that both 8.2 and 6.9 g/kg available lysine were insufficient to drive optimum growth. There was a positive response (p<0.05) to increasing available lysine level from 13 wk to finish which indicated that 6.9 g/kg available lysine was not adequate for finishing pigs. Energy digestibility decreased with decreasing CP level of diets containing 6.9 g/kg available lysine which may be attributed to the higher fibre content of the lower CP diets. Nitrogen excretion (g/d) was lowered when dietary CP was reduced regardless of whether the values were determined through balance or calculated using ADG. Calculated N excretion decreased linearly (p<0.001) and quadratically (p<0.001) with decreasing dietary CP content. When the N balance figures calculated in this study were compared with those quoted in the Northern Ireland and English Nitrates Directive Action Programmes, N excretion was less per pig (wean to finish) offered a 169 g/kg CP, 8.2 g/kg available lysine diet (2.39 kg vs 3.41 kg (Northern Ireland) and 2.93 kg (England)).

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.636-641
• /
• 2015

Waste energy conversion to SRF (Solid Refuse Fuel) has the effects not alternative fossil fuel usage but also the reduction of greenhouse gas. But the direct burning of the SRF including a plastic waste generates air pollution problem like soot, dioxin, etc. so that an application of pyrolysis and gasification treatment should be needed. The purpose of this study is to supply a basic thermal data of the pyrolysis gasification characteristics in the plastic-rich SRF which are needed for developing the novel pyrolyser or gasifier. To do so, a bench-scale test rig was newly engineered, and then experiments were achieved for the production characteristics of gas, tar, and char. While SRF sample, gasification air ratio, holding time changed as 2 g, 0.691, 32 min respectively, the $H_2$ 1.36%, $CH_4$ 2.18%, CO 1.88%, $Cl_2$ 15.9 ppm, HCl 6.4 ppm were composed. Also light tar benzene $4.03g/m^3$, naphthalene $0.39g/m^3$, anthracene $0.11g/m^3$, pyrene $0.06g/m^3$, gravimetric tar $18g/m^3$, and char 0.29 g was formed.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.109-114
• /
• 2013

The effects of aluminum nanoparticles (AlNs) on the thermal decomposition of ammonia perchlorate (AP) were investigated by DSC, TG-DSC and DSC-TG-MS-FTIR. Addition of AlNs resulted in an increase in the temperature of the first exothermic peak of AP and a decrease in the second. The processing of non-isothermal data at various heating rates with and without AlNs was performed using Netzsch Thermokinetics. The dependence of the activation energy calculated by Friedman's isoconversional method on the conversion degree indicated the decomposition process can be divided into three steps. They were C1/D1/D1 for neat AP, determined by Multivariate Non-linear Regression, and changed to C1/D1/F2 after addition of AlNs into AP. The isothermal curves showed that the thermal stability of AP in the low temperature stage was improved in the presence of AlNs.