• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.4
• /
• pp.185-192
• /
• 2001

In SRM drive, the ON·OFF angles of each phase switch should be accurately controlled in order to control the torque and speed stably. The accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor, that are used to provide the information of the rotor position and to control the SRM power circuit, respectively. However, as the speed increases, the amount of the switching angle deviation from the preset values is also increased. Therefore, the low cost encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple digital logic circuit is also presented in this paper, As a result, a stable high speed SRM drive can be achieved by the high resolution switching angle control and it is verified from the experiments that the proposed encoder the logic controller can be a powerful candidate for the practical low cost SRM drive.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.10-14
• /
• 2011

In this paper, we present an efficient hardware architecture of unrolling image mapper of catadioptric omnidirectional imaging systems. The catadioptric omnidirectional imaging systems generate images of 360 degrees of view and need to be transformed into panorama images in rectangular coordinate. In most application, it has to perform the panorama unrolling in real-time and at low-cost, especially for high-resolution images. The proposed hardware architecture adopts a software/hardware cooperative structure and employs several optimization schemes using look-up-table(LUT) of coordinate conversion. To avoid the on-line division operation caused by the coordinate transformation algorithm, the proposed architecture has the LUT which has pre-computed division factors. And then, the amount of memory used by the LUT is reduced to 1/4 by using symmetrical characteristic compared with the conventional architecture. Experimental results show that the proposed hardware architecture achieves an effective real-time performance and lower implementation cost, and it can be applied to other kinds of catadioptric omnidirectional imaging systems.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.363-366
• /
• 2003

In recent years, the Photovoltaic(PV) industries have been increasing steadily by an average of 30$\%$ per you. However, it is necessary to reduce PV module cost and to improve conversion efficiency to be promoted distribution of PV Japan, USA and Europe have been researching cost and efficiency of that. In this paper, we try to review diffusion perspective of PV in these countries. From the results of this paper, we will intend to suggest a suitable future course for domestic PV distribution.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.359-362
• /
• 2003

In recent years, the Photovoltaic(PV) industries have been Increasing steadily by an average of 30$\%$ per year. However, it is necessary to reduce PV module cost and to improve conversion efficiency to be promoted distribution of PV Japan, USA and Europe have been researching cost and efficiency of that. In this paper, we try to review diffusion status and policy of PV in these countries. From the results, we will intend to suggest a suitable future course for domestic PV distribution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.725-729
• /
• 2014

In this study, a transparent conductive oxide (TCO)-less dye-sensitized solar cells (DSSCs) was fabricated by using titanium (Ti) electrode to replace the Fluorine-doped tin oxide (FTO) for the reduction of manufacturing cost. Ti film was formed by electron beam evaporation method and the results showed the sheet resistance of Ti electrodes with a thikness of 500 nm similar to FTO. In case of power conversion efficiency (PCE), a DSSC with Ti electrodes showed a lower value than that with FTO by 0.38%. For the investigation of the difference, the DSSCs were measured and analyzed by using electrochemical impedance analyzer (EIS).

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.119.1-119.1
• /
• 2011

Since Gratzel et al. reported the first efficient dye-sensitized solar cells(DSSCs) in 1991, they have attracted much attention due to their relatively high power conversion efficiency and potentially low cost production. To date, high performance and good stability of DSSC based on Ru-dyes as a photosensitizer had been widely addressed in the literatures. However, the Ru-dyes are facing the problem of manufacturing costs and environmental issues. In order to obtain even cheaper photosensitizers for DSSC, the metal-free organic photosensitizers are strongly desired. The metal-free organic dyes offer superior molar extinction coefficients, low cost, and diverse molecular structures as compared to the conventional Ru-dyes, In this work, we have studied on the synthesis and characterization of the organo dendritic dyes containing different number of electron acceptor moieties in a molecule.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.59.2-59.2
• /
• 2011

We have demonstrated ink-jet printed indium tin oxide (ITO) and indium tin zinc oxide (IZTO) electrodes for cost-efficient organic solar cells (OSCs). By ink-jetting of crystalline ITO nano-particles and performing a rapid thermal anneal at $450^{\circ}C$, we were able to obtain directly patterned-ITO electrodes with an average transmittance of 84.14% and a sheet resistance of 202.7 Ohm/square without using a conventional photolithography process. The OSCs fabricated on the directly patterned ITO electrodes by ink-jet printing showed an open circuit voltage of 0.57 V, short circuit current of 8.47 mA/cm2, fill factor of 44%, and power conversion efficiency of 2.13%. This indicates that the ITO directly-patterned by ink-jet printing is a viable alternative to sputter-grown ITO electrodes for cost-efficient printing of OSCs due to the absence of a photolithography process for patterning and more efficient ITO material usage.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.102-109
• /
• 1994

Low cost high efficiency single crystal silicon solar cells for terrestrial applications have been fabricated by using inexpensive materials such as solar grade silicon wafer and pastes, and mass production processes such as screen printing and spray. Under 100 mW/cm$^2$ (AM 1.5) and $25^{\circ}C$ conditions conversion efficiency of 16.48% was obtained by anon fire-thru process and 15.55% by fire-thru process.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.13-13
• /
• 2010

The solar energy conversion will take 10 % global energy need by 2033. A thin film type solar cell has been considered as one of the promising candidates for a large area applicable solar cell fabrication at a low cost. The metal-assisted growth of microcrystalline Si (mc-Si) films has been reported for a quality Si film synthesis at a low temperature. It discusses the spontaneous growth of a Si film above a metal-layer for a thin film solar cell. Quite recently, a substantial demand of nanomaterials has been addressed for cost-effective solar cells. The nanostructure provides a large photoactive surface at a fixed volume, which is an advantage in the effective use of solar power. But the promising of nanostructure active solar cell has not been much fulfilled due mainly to the difficulty in architecture of nanostructures. We present here the Si nanowire (SiNW)-embedded Schottky solar cell. Multiple SiNWs were connected to two different metals to form a Schottky or an ohmic contact according to the metal work function values. It discusses the scheme of rectifying contact between metals and SiNWs and the SiNW-embedded Schottky solar cell performances.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.2
• /
• pp.84-89
• /
• 2003

The finite element method (FEM) is typically used in the process of motor design. However, the FEM requires computation time, Therefore, decreasing the number of FEM simulations may also decrease the simulation cost. Several optimal design methods overcoming this problem have been recently studied. This paper investigates the optimal design of the magnet pole of a BLDC motor through reducing simulation cost. The optimization minimizes the magnet volume and limits the average and cogging torques to certain values. In this paper, the response surface methodology and Taguchi's table for reducing the number of FEM simulations are used to approximate two constraints. The optimization result shows that the presented strategy is satisfactorily performed.