• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.839-847
• /
• 2004

In this study, the flow characteristics within supersonic cascades are numerically investigated by using Fine Turbo, a commercial CFD code. Cascade flows are computed for three different inlet conditions. : a uniform supersonic inlet condition, a linear nozzle and a converging-diverging nozzle located in front of cascades. The effect of inlet conditions is compared and flow characteristics including shock patterns and shock-boundary layer interaction are analyzed. Also the effect of design parameters such as pitch-chord ratio, blade angle and blade surface curvature on the flow within supersonic cascades are studied.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.323-326
• /
• 2006

This paper presents the computational results for the two-dimensional compressible non-reacted flow in a converging-diverging micro thrust nozzle of which the ratio of exit to throat width (0.541 in.) is 1.8. The RNG model is applied to calculate the turbulence by loading the standard coefficients. The results agreed very well with the experiments in the view of the shock structure and the pressure distribution at the various pressure ratios between the stagnation and the environmental states. The plume structures are also discussed on the view of the shock-cell structure.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2001년도 추계학술발표대회 논문집 제20권 2호
• /
• pp.389-392
• /
• 2001

To investigate the generation mechanism of the shock-associated noise, an underexpanded supersonic jet from an axisymmetic nozzle is simulated under the conditions of the Nozzle exit Mach number of 2 and the exit pressure ratio of Pe/Pe =1.5. The present simulation is performed based on the high-order accuracy and high-resolution ENO (Essentially Non-Oscillatory) scheme to capture the time-dependent flow structure representing the sound source. It was found that the shock-associated noise is generated by the weak interaction between the downstream propagating large turbulence structures of the jet flow and the quasi-periodic shock cell structure during the one is passing through the other. The directivity of propagating waves to the upstream is clearly shown in the visualization of pressure field. It is shown that the present calculation of the centerline pressure distribution is in fare agreement with the experimental data at the location of first shock cell.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.1-8
• /
• 2000

The flow in low-density plumes expanding into a region of finite pressure shows a quite different behavior from that observed in low-density plumes expanding into a vacuum. The flow structure in the plume varies depending on applied ambient and stagnation chamber conditions. In the present study, the direct simulation Monte-Carlo (DSMC) method based on molecular gas dynamics is employed in the analysis of low-density gas flows expanding through a small converging/diverging nozzle. Special attention has been paid to the effect of non-zero ambient and stagnation pressures on the flow structure which has rarely been studied using the DSMC method.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.1-9
• /
• 2002

압력비에 따라 유동 구조가 달라지는 박리 노즐 유동을 수치적인 방법으로 해석하였다. 축대칭 Navier-Stokes 식에 유한 체적법을 적용하여 공간 차분항에는 AUSM 기법, 시간 차분항은 2차의 시간 정확도를 가지는 기법을 사용하였다. 형상이 주어진 노즐 유동은 압력비에 따라 1차원 해석해가 존재하지만, 수치적으로 해석된 축대칭 노즐 유동은 매우 복잡한 유동 구조를 나타내었다. 압력비에 따라 박리 또는 비박리 유동, 정상 또는 일정한 주기성을 가지는 비정상 유동, Regular reflection, recirculation이 존재하거나 존재하지 않는 Mach Reflection 등의 특징적인 유동을 가지고 있었다. 본 연구에서는 이러한 유동 구조 중에서 박리 노즐 유동을 고찰하여 일정한 규칙성을 가지고 유동 구분을 하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.167-171
• /
• 2012

비행고도가 우주비행체 자세제어용 하이드라진 추력기 노즐의 추력성능 특성에 미치는 영향을 규명하기 위해 노즐유동 해석을 수행한다. k-${\omega}$ SST 난류모델을 사용한 Reynolds-averaged Navier-Stokes 방정식으로 노즐유동을 비행고도 변이별로 해석하되, 비행고도는 연속체역학이 유효한 범위내로 제한한다. 작동 고도가 10 km 이하일 때는 노즐내부에 충격파 및 유동박리 등의 비가역적 현상이 발생하여 추력성능이 감소하였으나, 30 km 이상의 고도환경에서는 공칭추력 수준으로 회복되었다.

• 한국추진공학회지
• /
• 제16권2호
• /
• pp.42-50
• /
• 2012

열전달 연구의 목적은 온도와 열유속 분포를 보다 정확하게 예측하는 것이다. 이를 위해 상용 CFD 코드인 FLUENT를 사용하여 2종류의 노즐에 대해 질량유속비와 압력비를 계산하였으며, 실험결과와 잘 일치하였다. 또한 1종류의 노즐에 대해 FLUENT를 사용한 노즐 벽면에서의 열전달계수 계산결과는 노즐 축소부에서 실험결과 보다 약간 크게 예측되었으나 확대부에서는 잘 일치하고 있다. Bartz식을 이용한 열전달계수 계산결과는 전체적으로 실험결과 보다 크게 예측되었다. 계산결과가 실험결과와 차이를 보이는 원인은 노즐 내 급가속 유동에 의한 층류화, 난류모델 및 격자구성 등을 고려해 볼 수 있다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권2호
• /
• pp.149-155
• /
• 2011

The viscous flow in an axisymmetric nozzle was analyzed while accounting for the mesh sizes in both in the free stream and the boundary layer. The Navier-Stokes equations were resolved using the finite volume method in order to determine the supersonic flow parameters at the exit of the converging-diverging nozzle. The numerical technique in the aforementioned method uses the flux vector splitting of Van Leer. An adequate time stepping parameter, along with the Courant, Friedrich, Lewis coefficient and mesh size level, was selected to ensure numerical convergence. The boundary layer thickness significantly affected the viscous flow parameters at the exit of the nozzle. The best solution was obtained using a very fine grid, especially near the wall at which a strong variation of velocity, temperature and shear stress was observed. This study confirmed that the boundary layer thickness can be obtained only if the size of the mesh is lower than a certain value. The nozzles are used at the exit of the shock tube in order to obtain supersonic flows for various tests. They also used in propulsion to obtain the thrust necessary to the displacement of the vehicles.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.547-550
• /
• 2008

A solid rocket motor has quite complex physical condition such exothermal chemical reaction in subsonic area and supersonic ex pansion in a converging-diverging nozzle. To introduce a simulation tool for compressible flow in supersonic range as well as incompressible chemical reaction zone in a whole rocket nozzle is a essential demand. Since the flow vary subsonic to super sonic, the convergence in computation becomes very low and unstable in a whole domain of rocket motor. This paper reports the 2-D Axisymmetric and simple 3-D solid propellant combustion and flow of gases in rocket motor by using a precondi tioning, shear stress turbulence modeling, AUSM(p). To simulate the simplified combustion process, Double base solid propellant is used to calculate reaction of solid propellant.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.94-101
• /
• 2013

In the present study, a practical method to predict cavitation erosion, which caused a critical damage on hydraulic machineries, was developed. Impact and critical velocities were defined to develop a practical method for the prediction of cavitation erosion. To develope the practical method, the computational fluid dynamics (CFD) was introduced. Cavitating flows with erosion in a converging-diverging nozzle and around a hydrofoil were simulated by developed and validated code. Based on the CFD results, the cavitation erosion coefficient was derived by a curve fitting method. The cavitation erosion coefficient was formulated as the function of the cavitation and Reynolds numbers. A cavitating flow in an axisymmetric nozzle followed by radial divergence was simulated to validate the developed practical method. For the application to a propeller, a cavitating flow around a propeller was simulated. Predicted damage extent showed similar with damaged full-scale propeller blade.