• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1482-1487
• /
• 2004

In general the swirl jet is generated by the injected flow that is forced to the tangential direction. A spiral nozzle which is composed of an annular slit and a convergent nozzle, is released the spiral jet that is generated by the radial flow injection through an annular slit. The objective of the present study is to investigate the additional study that is studied a changed the convergent nozzle angle and nozzle length. In the present computation, a finite volume scheme is used to solve three dimensional Navier-Stokes equations with RNG $k-{\varepsilon}$ turbulent model. The convergent nozzle angle and the nozzle length of the spiral nozzle are varied to obtain different spiral flows inside the conical convergent nozzle. The present computational results are compared with the previous experimental data. The results obtained show that the convergent nozzle angle and the nozzle length of the spiral jet strongly influence the characteristics of the spiral jets, such as a tangential and a jet width.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.193-200
• /
• 2001

Recently, the concrete floor finishing robot, which can be used for flattening and smoothing the concrete floor, has been developed in Korea and Japan. While the previous research assumes that the concrete floor is deformable and the trowel is rigid in modeling the concrete floor finisher, we assume that the concrete floor is rigid and the trowel is deformable. Based on this assumption, we derived the equations of motion and found the convergent velocity of the concrete floor finisher using the computer simulation. From these results, we can understand the relationship between the motion characteristics and the design and control parameter of the robot.

• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.187-202
• /
• 2020

The exhaust nozzle serves back pressure of Pulse detonation combustor, so combustion chamber gets sufficient pressure for propulsion. In this context recent researches are focused on influence of nozzle effect on single cycle detonation wave propagation and propulsion performance of PDE. The effects of various nozzles like convergent-divergent nozzle, convergent nozzle, divergent nozzle and without nozzle at exit section of detonation tubes were computationally investigated to seek the desired propulsion performance. Further the effect of divergent nozzle length and half angle on detonation wave structure was analyzed. The simulations have been done using Ansys 14 Fluent platform. The LES turbulence model was used to simulate the combustion wave reacting flows in combustor with standard wall function. From these numerical simulations among four acquaint nozzles the highest thrust augmentation could be attained in divergent nozzle geometry and detonation wave propagation velocity eventually reaches to 1830 m/s, which is near about C-J velocity. Smaller the divergent nozzle half angle has a significant effect on faster detonation wave propagation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.502-507
• /
• 2003

Spiral jet is characterized by a wide region of the free vortex flow with a steep axial velocity gradient, while swirl jet is largely governed by the forced vortex flow and has a very low axial velocity at the jet axis. However, detailed generation mechanism of spiral flow components is not well understood, although the spiral jet is extensively applied in a variety of industrial field. In general, it is known that spiral jet is generated by the radial flow injection through an annular slit which is installed at the inlet of convergent nozzle. The objective of the present study is to understand the flow characteristics of the spiral jet, using a computational method. A finite volume scheme is used to solve 3-dimensional Navier-Stokes equations with RNG ${\kappa}-{\varepsilon}$ turbulent model. The computational results are validated by the previous experimental data. It is found that the spiral jet is generated by coanda effect at the inlet of the convergent nozzle and its fundamental features are dependent the pressure ratio of the radial flow through the annular slit and the coanda wall curvature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2029-2034
• /
• 2004

Spiral jet is characterized by a wide region of the free vortex flow with a steep axial velocity gradient, while swirl jet is largely governed by the forced vortex flow and has a very low axial velocity at the jet axis. However, detailed generation mechanism of spiral flow components is not well understood, although the spiral jet is extensively applied in a variety of industrial field. In general, it is known that spiral jet is generated by the radial flow injection through an annular slit which is installed at the inlet of a conical convergent nozzle. The present study describes a computational work to investigate the effects of annular slit on the spiral jet. In the present computation, a finite volume scheme is used to solve three dimensional Naver-Stokes equations with RNG ${\kappa}-{\varepsilon}$ turbulent model. The annular slit width and the pressure ratio of the spiral jet are varied to obtain different spiral flows inside the conical convergent nozzle. The present computational results are compared with the previous experimental data. The results obtained obviously show that the annular slit width and the pressure ratio of the spiral jet strongly influence the characteristics of the spiral jets, such as tangential and axial velocities.

• 한국추진공학회지
• /
• 제15권2호
• /
• pp.8-14
• /
• 2011

본 논문에서는 경사진 그레인 포트 형상을 가진 고체 연료를 사용한 하이브리드 로켓의 연소 특성을 실험적으로 연구하였다. $1^{\circ}$의 경사각을 갖는 수렴, 확산 형상 고체 연료는 원통형 연료에 비해 충전 효율이 6.8 % 더 높았다. 수렴 형상의 그레인 포트를 갖는 연료에서는 경사각이 없는 원통형 연료에 비해 동일 산화제 유속 구간에서 후퇴율이 평균 17.5 % 증가하였으나 확산 형상 연료에서는 후퇴율의 차이가 크지 않았다. 또한, 수렴 형상의 연료를 사용한 경우 특성속도 및 특성속도효율이 증가하였으며, 이를 통해 하이브리드 로켓 연료에서 수렴 형상의 그레인 포트가 연소 효율 및 성능을 개선하는데 효과적임을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1835-1844
• /
• 2022

Single-orifice plate is wildly utilized in the piping system of the nuclear power plant to throttle and depressurize the fluid of the pipeline. The cavitation induced by the single-orifice plate may cause some serious vibration of the pipeline. This study aims to find the optimal designs of the single-orifice plates that may have weak cavitation possibilities. For this purpose, a new single-orifice plate with a convergent-flat-divergent hole was modeled, a multi-objective optimization method was proposed to optimize the shape of a single-orifice plate, while computational fluid dynamics method was adopted to obtain the fluid physical quantities. The reciprocal cavitation number and the developmental integral were treated as cavitation indexes (e.g., objectives for the optimization algorithm). Two non-dominant designs ultimately achieved illustrated obvious reduction in the cavitation indexes at a Reynolds number Re = 1 ×10⁵ defined based on fluid velocity. Besides, the sensitivity analysis and temperature effects were also performed. The results indicated that the convergent angle of the single-orifice plate dominants the cavitation behavior globally. The optimal designs of single-orifice plates result in lower downstream jet areas and lower upstream pressure. For a constant Reynolds number, the higher temperature of liquid water, the easier it is to undergo cavitation. Whereas there is a diametric phenomenon for a constant fluid velocity. Moreover, the regression models were carried out to establish the mathematical relation between temperature and cavitation indexes.

• 한국과학교육학회지
• /
• 제40권4호
• /
• pp.359-374
• /
• 2020

본 연구는 조사연구와 자기연구의 복합 형태로 구성되었다. 조사연구로서 초등 교사의 융합 수업 및 융합 지식에 대한 인식론적 신념을 조사하였다. 그 결과를 대표하는 사례로서 교사이자 연구자인 "나"를 연구 참여자로 하여 융합 수업을 실행하는 교사로서 나의 융합 수업과 융합 지식에 대한 인식론적 신념을 살펴보고, 속력을 주제로 수학-과학-체육의 가족 유사성에 근거한 융합 과학수업 프로그램을 지도한 양상을 자기연구로 실행하였다. 초등 교사들의 융합 수업과 융합 지식에 대한 인식론적 신념에 대한 개방형 검사 문항을 초등 교사 28명에게 서면 질의 방법으로 조사하였다. 연구에 참여했던 초등 교사들은 융합 수업을 교과 활용적 접근 또는 다학문적 접근의 융합으로 생각하였다. 융합 지식을 개별 교과의 집합체로 인식하고 있었으며, 융합된 지식은 학생 스스로 문제를 해결하는 과정에서 습득할 수 있다는 인식론적 신념을 가지고 있었다. 교사이자 연구자인 나 역시 비슷한 신념을 지니고 있었다. 자기연구를 수행하는 동안 나는 가족유사성의 범주별 분석 결과와 그것에 근거한 융합 지식 체계를 반영하기 위해 노력하였으나, 간학문적 접근의 융합 활동을 구현하는데 어려움이 있었다. 수학의 단위, 비와 비율의 개념은 과학의 속력 개념과 연계되어 있어서 두 교과의 개념을 융합적으로 이해하는데 효과가 있었으며, 체육 활동은 수학과 과학 개념을 융합적으로 학습하기 위한 맥락을 제공하여 간학문적 접근의 융합 수업을 촉진시킬 수 있었다. 가족유사성에 근거한 간학문적 융합 지식 체계와 교사인 나의 인식론적 신념 간의 간극과 해결 양상에 대한 논의가 제시되었다.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.224-232
• /
• 2000

Four turbulent $k-{\varepsilon}$ models (i.e., standard model, modified models with streamline curvature modification and/or preferential dissipation modification) are applied in order to analyze the turbulent flow of wall-attaching offset jet. For numerical convergence, this paper develops a method of slowly increasing the convective effect induced by skew-velocity in skew-upwind scheme (hereafter called Partial Skewupwind Scheme). Even though the method was simple, it was efficient in view of convergent speed, computer memory storage, programming, etc. The numerical results of all models show good prediction in first order calculations (i.e., reattachment length, mean velocity, pressure), while they show some deviations in ·second order (i.e., kinetic energy and its dissipation rate). Like the previous results obtained by upwind scheme, the streamline curvature modification results in better prediction, while the preferential dissipation modification does not.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1702-1710
• /
• 2001

Supersonic coaxial jets are investigated numerically by using the axisymmetric, Wavier-Stokes equations which are solved using a fully implicit finite volume method. Three different kinds of coaxial nozzles are employed to understand the flow physics involved in the supersonic coaxial jets. Two convergent-divergent supersonic nozzles are designed to have the same Mach number 2.0, and used to compare the coaxial jet flows with those discharging from one constant-area nozzle. The impingement angle of the annular jets are varied. The primary pressure ratio is changed in the range from 2.0 to 10.0 and the assistant jet ratio from 1.0 to 3.0. The results obtained show that the fluctuations of the total pressure and Mach number along the jet axis are much higher in the constant-area nozzle than those in the convergent-divergent nozzles, and the constant-area nozzle lead to higher total pressure losses, compared with the convergent-divergent nozzles. The assistant jets from the annular nozzle affect the coaxial jet flows within the distance less than about ten times the nozzle throat diameter, but beyond it the coaxial jet is conical with self-similar velocity profiles. Increasing both the primary jet pressure ratio and the assistant jet pressure ratio produces a longer coaxial jet core.