• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.250-253
• /
• 2015

High contrast grating (HCG) is the structure made up of the sub-wavelength grating of high-index and the surrounding layer of low-index, which reveals high contrast between two materials. Its advantages include high reflectivity over a broad bandwidth, polarization and wavelength selectivity, optical high-Q resonator, and phase modulation. In this work, the HCG structure comprising of indium tin oxide (ITO) and Silicon (Si), for the surrounding layer and the grating layer respectively, was studied. Its theoretical model was established, and transmittance, phase and optical behavior were calculated by rigorous coupled-wave analysis and finite element method. Furthermore, the established structure was fabricated to validate its feasibility. The fabricated structure shows the focusing capability whose length is about $10{\mu}m$, and the feasibility of the structure was demonstrated. It is also meaningful that ITO layer can contribute to the fabrication of the HCG structure, leading to enable the structure to be electrical-driven.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.794-798
• /
• 2016

A polymer-stabilized vertical alignment (PS-VA) mode with fishbone-shaped pixel electrode structure is mainly used in large-sized liquid crystal displays (LCDs) owing to its advantages such as wide viewing angle, good transmittance and fast response time. One drawback of this mode is a main bone electrode, which crosses in the center of a pixel. It causes the transmittance to decrease badly because LCs cannot be reoriented in this region, and thus, it is particularly unfavorable in an ultra-high-definition LCD. Here, we propose an innovative structure with the main bone electrode relocated to the edge area in a pixel, and investigate how this reverse directed fishbone-shaped pixel electrode structure affects electro-optic characteristics. The proposed structure shows enhanced electro-optic performance, such as the higher transmittance and the faster response time than the conventional VA mode with fishbone-shaped pixel electrode structure.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.841-846
• /
• 2014

This study proposes a novel optical sensor structure based on a refractometer combining a bend waveguide with an air trench. The optical sensor is a $1{\times}2$ splitter structure with a reference channel and a sensing channel. The reference channel has a straight waveguide. The sensing channel consists of a U-bend waveguide connecting four C-bends, and a trench structure to partially expose the core layer. The U-bend waveguide consists of one C-bend with the maximum optical loss and three C-bends with minimum losses. A trench provides a quantitative measurement environment and is aligned with the sidewall of the C-bend having the maximum loss. The intensity of the output power depends on the change in the refractive index of the measured material. The insertion loss of the proposed optical sensor changes from 3.7 dB to 59.1 dB when the refractive index changes from 1.3852 to 1.4452.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.134-147
• /
• 2013

Today, the convergence of fashion design and digital technology has become a popular method and accordingly been tried variously in the fashion area. This study aimed to analyze the character of the collaboration with fashion and technology, and the meaning of technology as emotional expression methods. Selected designer's collections, literature and other related studies were reviewed in order to analyze the generative structure of the meaning and the binary-opposition in the convergence of body, fashion design and technology. Literatures and selected designer's collections were reviewed and quantitatively studies were performed to classify the convergence of human bodies, fashion design and technology through Greimas Semiotics rectangle based on binary-opposition of meaning and isotophy analysis. The research presents three types of fashion technology methods: mechanical movement, light/digital media, and virtual image. The convergence of fashion and technology was classified as the direct convergence and the indirect convergence. The direct convergence was characterized by variability and has automatic, independent movement, but the indirect convergence was shown closed and to have contradistinctive images.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.597-599
• /
• 2008

This letter presents the design of a small and low-profile RFID tag antenna in the UHF band that can be mounted on metallic objects. The designed tag antenna, which uses a ceramic material as a substrate, consists of a radiating patch and a microstrip line with two shorting pins for a proximity-coupled feeding structure. Using this structure, impedance matching can be simply obtained between the antenna and tag chip without a matching network. The fractional impedance bandwidth for $S_{11}$ <3 dB and radiation efficiency are about 1.4% and 56% at 911 MHz, respectively. The read range is approximately from 5 m to 6 m when the tag antenna is mounted on a metallic surface.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.147-158
• /
• 2012

In this paper, we present a demodulation structure suitable for a reader baseband receiver in a passive radio frequency identification (RFID) environment. In a passive RFID configuration, an undesirable DC-offset phenomenon may appear in the baseband of the reader receiver, which can severely degrade the performance of the extraction of valid information from the received tag signal. To eliminate this DC-offset phenomenon, the primary feature of the proposed demodulation structures for the received FM0 and Miller subcarrier signals is to reconstruct the signal corrupted by the DC-offset phenomenon by creating peak signals from the corrupted signal. It is shown that the proposed method can successfully detect valid data, even when the received baseband signal is distorted by the DC-offset phenomenon.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.361-374
• /
• 2020

Recently, small and medium-sized rahmen-type bridges have been developed as a technology that ensures the stability of structural behavior and the safety of use at the same time by using efficient and economical materials that make up the convergence section of reinforced bar, structural steel and concrete. This study is about a rahmen-type structure applied with the installation and dismantling of the strut. It improves the serviceability of the structure by forming multi-points and efficiently applies the convergence section of structural steel and concrete materials to the structural system changes to induce the displacement improvement effect additionally. By constructing mock-up models for the beam-column joint, the displacement was calculated and compared, and this was compared and analyzed by numerical analysis. The final displacement showed an improvement effect of 13.46% to 36.28% based on the vertical displacement of the existing structure without struts through the experiment of the mock-up models. As a result of analysis by numerical analysis method, the displacement improvement effect of 42.89% could be derived.

• Journal of Technology Innovation
• /
• v.24 no.2
• /
• pp.1-20
• /
• 2016

This case is to analyze the structure of technology convergence with social network analysis. More specifically, the convergence structure among input technologies mediated with products is analyzed with 2-mode social network analysis. Products are identified in project's goal and coded as the Korea Standard Industrial Classification. The input technologies are coded as the National Science Technology Classification. The subjects were 401 R&D projects applied to '2012 Convergence Technology Development Project for Small and Medium Businesses' promoted by Korea Technology & Information Promotion Agency for Small and Medium Enterprises. IT sectors had the structure of a particular input technology connected to many products, BT sectors also had a few input technology connected to many products but most were connected to specific products. Therefore We have realized that each convergence area had different convergence structure. There were the difference of connectivity centrality between input technologies and input technologies mediated with products. For IT sectors, the embedded S/W were the highest in both cases. For BT sectors, functional cosmetic development and fermentation technology were the highest in input technologies but fermentation technology was not the highest in input technologies mediated with products. This case defines the convergence based on the real projects and the use for managing and planing projects. Therefore, this case was to make a tool to analyze and design technology convergence projects.

• Carbon letters
• /
• v.27
• /
• pp.12-17
• /
• 2018

We fabricated a Li-S battery with post-treated carbon nanotube (CNT) films which offered better support for sulfur, and investigated the effect of the surface properties and pore structure of the post-treated CNT films on Li-S battery performance. Post-treatments, i.e., acid treatment, unzip process and cetyltrimethylammonium bromide (CTAB) treatment, effectively modified the surface properties and pore structure of the CNT film. The modified pore structure impacted the ability of the CNT films to accommodate the catholyte, resulting in an increase in initial discharge capacity.

• Journal of Korean Society for Quality Management
• /
• v.50 no.1
• /
• pp.21-33
• /
• 2022

Purpose: As most defense technologies are classified as confidential, the corresponding International Patent Classifications (IPCs) require special attention. Consequently, the list of defense-related IPCs has been managed by the government. This paper aims to evaluate the defense-related IPCs and propose a methodology to revalidate and improve the IPC classification scheme. Methods: The patents in military technology and their corresponding IPCs during 2009~2020 were utilized in this paper. Prior to the analysis, patents are divided into private and public sectors. Social network analysis was used to analyze the convergence structure and central defense technology, and association rule mining analysis was used to analyze the convergence pattern. Results: While the public sector was highly cohesive, the private sector was characterized by easy convergence between technologies. In addition, narrow convergence was observed in the public sector, and wide convergence was observed in the private sector. As a result of analyzing the core technologies of defense technology, defense-related IPC candidates were identified. Conclusion: This paper presents a comprehensive perspective on the structure of convergence of defense technology and the pattern of convergence. It is also significant because it proposed a method for revising defense-related IPCs. The results of this study are expected to be used as guidelines for preparing amendments to the government's defense-related IPC.