• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.5
• /
• pp.15-23
• /
• 2021

This study was carried out to suggest an appropriate plant combination by evaluating the growth of flowering ground-cover plants planted with Festuca glauca 'Eljiah Blue' on the roof-top environment. As for the plant materials, Allium senescens and Chrysanthemum coreanum which are shorter than Festuca glauca 'Eljiah Blue' and Sedum takesimense and Agastache rugosa which are taller than Festuca glauca 'Eljiah Blue' were selected. Festuca glauca 'Eljiah Blue' was planted on Conrol, and Festuca glauca 'Eljiah Blue' with Allium senescens (T1), Festuca glauca 'Eljiah Blue' with Sedum takesimense (T2), Festuca glauca 'Eljiah Blue' with Agastache rugosa(T3), and Festuca glauca 'Eljiah Blue' with Chrysanthemum coreanum (T4) were planted in each experimental plot. Plant height and covering rate were measured to evaluate the growth of Festuca glauca 'Eljiah Blue'. Also, relative growth rate (RGR) of plant height, RGR of plant width, and mortality rate of the flowering ground-cover plants were estimated. Plant height and cover rate of Festuca glauca 'Eljiah Blue' was greatest in T3. RGR of plant height was greater in the order of Agastache rugosa, Allium senescens, Chrysanthemum coreanum, and Sedum takesimense. In particular, RGR of plant width was also greatest for Agastache rugosa. Mortality rates of Agastache rugosa and Allium senescens were lowest at 11%. Therefore, based on good growth of Festuca glauca 'Eljiah Blue' planted with Agastache rugosa, these results were suggested as a desirable combination of plant species for rooftop gardening.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.383-387
• /
• 2023

The quartz crystal microbalance (QCM), commonly used in high vacuum deposition, becomes difficult to use when a thick film is deposited on the quartz, affecting the crystal's inherent vibration. In this study, a non-destructive optical measurement method was developed to measure the film's deposition rate during the in-situ film deposition process. By measuring the scattered laser intensity caused by the dimer in the parylene gas passing through the gas flow path, it was successfully confirmed that the ratio of the dimer in the parylene gas increases as the pyrolysis temperature decreases. Additionally, it was noted that the film's thickness and haze increase as the pyrolysis temperature decreases by confirming the characteristics of the visible parylene films. Through the research results, we aim to utilize the stable in-situ film deposition rate measurement system to control the precise film deposition rate of parylene films.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.649-654
• /
• 2012

This paper presents a novel 16-quadrature-amplitude-modulation (QAM) E-band communication system. The system can deliver 10 Gbps through eight channels with a bandwidth of 5 GHz (71-76 GHz/81-86 GHz). Each channel occupies 390 MHz and delivers 1.25 Gbps using a 16-QAM. Thus, this system can achieve a bandwidth efficiency of 3.2 bit/s/Hz. To implement the system, a driver amplifier and an RF up-/down-conversion mixer are implemented using a $0.1{\mu}m$ gallium arsenide pseudomorphic high-electron-mobility transistor (GaAs pHEMT) process. A single-IF architecture is chosen for the RF receiver. In the digital modem, 24 square root raised cosine filters and four (255, 239) Reed-Solomon forward error correction codecs are used in parallel. The modem can compensate for a carrier-frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of $10^{-5}$ at a signal-to-noise ratio of about 21.5 dB.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1242-1250
• /
• 2015

It is very important to provide a parameterized quality of service (QoS) using traffic specification (TSPEC), such as mean data rate, maximum burst size, and peak data rate, when packets from the application layer need to be transmitted with guaranteed services in a high-rate wireless personal area network (HR-WPAN). As medium resources are limited, the optimal medium time required for each device needs to be estimated to share the resources efficiently among devices. This paper proposes a variable-service interval-based resource allocation algorithm to efficiently make a reservation of medium resources based on a parameterized QoS. In other words, the proposed algorithm calculates the number of medium access slots (MASs) based on TSPEC, local resources, and local conditions and determines suitable locations for the MASs within a superframe to accommodate more devices. The simulation results show that the proposed algorithm can accommodate more devices and has greater than 10% resource allocation efficiency in an HR-WPAN compared to existing schemes.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.163-167
• /
• 2023

The restaurant industry is an industry with low entry barriers, and furthermore, it is an indispensable industry in life. However, for the restaurant industry, it is necessary to start a business considering many factors. In particular, the comparative group for each restaurant industry is different, and the commercial area analysis should be analyzed differently. Moreover, counseling for restaurant start-ups is still sticking to how to start a restaurant by meeting with each franchise supervisor or counselor. Therefore, a restaurant start-up chatbot is needed for prospective restaurant founders, and a food tech chatbot is needed to collect basic data. Therefore, in this study, factors for restaurant start-ups were divided into youth, preliminary start-ups, menus, taste, and food. In the case of restaurant start-ups with low entry barriers, it was confirmed as the most preferred start-up by young people. However, indiscriminate restaurant start-ups not only increase the closing rate but also have a significant impact on household debt, so accurate consulting should be used to lower the closing rate and increase the success rate. Furthermore, theories and measures for food technologies such as chatbots should be further developed to obtain accurate information on franchise start-ups.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1329-1338
• /
• 1999

In this paper, an efficient signal interference control technique to improve the convergence speed of LMS algorithm is introduced. The convergence characteristics of the proposed algorithm, whose coefficients are multiply adapted in a symbol time period by recycling the received data, are analyzed to prove theoretically the improvement of convergence speed. According as the step-size parameter $\mu$ is increased, the rate of convergence of the algorithm is controlled. Also, a increase in the step-size parameter $\mu$ has the effect of reducing the variation in the experimentally computed learning curve. Increasing the eigenvalue spread has the effect of controlling down the rate of convergence of the adaptive equalizer and also increasing the steady-state value of the mean squared error and also demonstrate the superiority of signal interference control to the filter algorithm increasing convergence speed by (B+1) times due to the data-recycling LMS technique.

• Korean Journal of Health Education and Promotion
• /
• v.33 no.2
• /
• pp.47-55
• /
• 2016

Objectives: We investigated whether the rate of depressive symptom is higher among family members of asthmatic patient compared to people who had no asthmatic family member. Methods: This study used data from the fourth and fifth Korea National Health and Nutrition Examination Survey (2007-2012). In this cross-sectional study, 15,987 men (mean age 46.4) and 20,906 women (mean age 47.4) were included. To compare the rate of depressive symptoms in individuals who had a family member with asthma and those who did not have, we analyzed data using survey logistic regression. Results: Diagnosed depression was reported by 3.0% of the study population, by 4.2% of asthmatic patient's family member, and by 3.0% of individuals who did not have a family member with asthma. Family members of asthmatic patient increased odds of diagnosed depression compared with those who did not had an asthmatic family member (odds ratio = 1.56, p = 0.008). Conclusions: To prevent depression among family members of asthmatic patient, health education for entire family of asthmatic patient need to be considered. Also, government and policy makers should give more attention to caregivers who had a family member with asthma.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.128-132
• /
• 2011

Least mean square adaptive algorithms have played important role in radar, sonar, speech processing, and mobile communication. In mobile communication area, the convergence rate of a LMS algorithm is quite important. However, LMS algorithms have slow and non-uniform convergence rate problem For overcoming these shortcomings, various variable step LMS adaptive algorithms have been studied in recent years. Most of these recent LMS algorithms have used complex variable step methods to get a rapid convergence. But complex variable step methods need a high computational complexity. Therefore, the main merits such as the simplicity and the robustness in a LMS algorithm can be eroded. The proposed deterministic variable step LMS algorithm is based upon a simple deterministic function for the step update so that the simplicity of the proposed algorithm is obtained and the fast convergence is still maintainable.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.532-545
• /
• 2022

In-depth convergence analyses for neutronics/thermal-hydraulics (T/H) coupled calculations are performed to investigate the performance of nonlinear methods based on the Fixed-Point Iteration (FPI). A simplified neutronics-T/H coupled system consisting of a single fuel pin is derived to provide a testbed. The xenon equilibrium model is considered to investigate its impact during the nonlinear iteration. A problem set is organized to have a thousand different fuel temperature coefficients (FTC) and moderator temperature coefficients (MTC). The problem set is solved by the Jacobi and Gauss-Seidel (G-S) type FPI. The relaxation scheme and the Anderson acceleration are applied to improve the convergence rate of FPI. The performances of solution schemes are evaluated by comparing the number of iterations and the error reduction behavior. From those numerical investigations, it is demonstrated that the number of FPIs is increased as the feedback is stronger regardless of its sign. In addition, the Jacobi type FPIs generally shows a slower convergence rate than the G-S type FPI. It also turns out that the xenon equilibrium model can cause numerical instability for certain conditions. Lastly, it is figured out that the Anderson acceleration can effectively improve the convergence behaviors of FPI, compared to the conventional relaxation scheme.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.543-550
• /
• 2023

Electrostatic discharge (ESD) testing for human body model tests is an essential part of the reliability evaluation of electronic/electrical devices and components. However, global environmental concerns have called for the need to replace the mercury-wetted relay switches, which have been used in ESD testers. Therefore, herein, we propose an ESD tester using metal oxide semiconductor-controlled thyristor (MCT) devices with a significantly higher rising rate of anode current (di/dt) characteristics. These MCTs, which have a breakdown voltage beyond 3000 V, were developed through an in-house foundry. As a replacement for the existing mercury relays, the proposed ESD tester with the developed MCT satisfies all the requirements stipulated in the JS-001 standard for conditions at or below 2000 V. Moreover, unlike traditional relays, the proposed ESD tester does not generate resonance; therefore, no additional circuitry is required for resonant removal. To the best of our knowledge, the proposed ESD tester is the first study to meet the JS-001 specification by applying a new switch instead of an existing mercury-wetted relay.