• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1982-1990
• /
• 2022

The purpose of this study was to verify the possibility of fuel rod pattern analysis in a fresh fuel assembly using the Yonsei single-photon emission computed tomography (YSECT) system. The YSECT system consisted of three main parts: four trapezoidal-shaped bismuth germanate scintillator-based 64-channel detectors, a semiconductor-based multi-channel data acquisition system, and a rotary stage. In order to assess the performance of the prototype YSECT, tomographic images were obtained for three representative fuel rod patterns in the 6 × 6 array using two representative image-reconstruction algorithms. The fuel-rod patterns were then assessed using an in-house fuel rod pattern analysis algorithm. In the experimental results, the single-directional projection images for those three fuel-rod patterns well discriminated each fuel-rod location, showing a Gaussian-peak-shaped projection for a single 10 mm-diameter fuel rod with 12.1 mm full-width at half maximum. Finally, we successfully verified the possibility of the fuel rod pattern analysis for all three patterns of fresh fuel rods with the tomographic images obtained by the rotational YSECT system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.3875-3891
• /
• 2021

In this study, a Velostat pressure sensor was manufactured to develop a plantar pressure measurement system and a C#-based application was developed to monitor and collect plantar pressure data in real time. In order to evaluate the characteristics of the proposed plantar pressure measurement system, the accuracy of plantar pressure index and personal classification was verified by comparing with MatScan, a commercial plantar pressure measurement system. As a result, the output characteristics according to the weight of the Velostat pressure sensor were evaluated and a trend line with the reliability of r² = 0.98 was detected. The Root Mean Square Error(RMSE) of the weighted area was 11.315 cm², the RMSE of the x coordinate of Center of Pressure(CoP_x) was 1.036 cm and the RMSE of the y coordinate of Center of Pressure(CoP_y) was 0.936 cm. Finally, inaccuracy of personal classification, the proposed system was 99.47% and MatScan was 96.86%. Based on the advantage of being simple to implement and capable of manufacturing at low cost, it is considered that it can be applied to various fields of measuring vital signs such as sitting posture and breathing in addition to the plantar pressure measurement system.

• East Asian mathematical journal
• /
• v.38 no.4
• /
• pp.463-496
• /
• 2022

The purpose of this study is to analyze the mathematical creativity and computational thinking of mathematically gifted elementary students through a convergence class using programming and to identify what it means to provide the convergence class using Python for the mathematical creativity and computational thinking of mathematically gifted elementary students. To this end, the content of the nine sessions of the Python-applied convergence programs were developed, exploratory and heuristic case study was conducted to observe and analyze the mathematical creativity and computational thinking of mathematically gifted elementary students. The subject of this study was a single group of sixteen students from the mathematics and science gifted class, and the content of the nine sessions of the Python convergence class was recorded on their tablets. Additional data was collected through audio recording, observation. In fact, in order to solve a given problem creatively, students not only naturally organized and formalized existing mathematical concepts, mathematical symbols, and programming instructions, but also showed divergent thinking to solve problems flexibly from various perspectives. In addition, students experienced abstraction, iterative thinking, and critical thinking through activities to remove unnecessary elements, extract key elements, analyze mathematical concepts, and decompose problems into small components, and math gifted students showed a sense of achievement and challenge.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.181-195
• /
• 2021

Interest in the transition to MyData beyond the use of personal data is high worldwide. In order for the ideology of MyData to be realized, various useful MyData services would be developed in practice. Above all, convergence must be premised for the development of MyData. This study proposed strategies for activating MyData convergence services from four perspectives (BLTS: Business, Legal, Technology, and Social). In particular, the purpose w as to revitalize domestic convergence services by comparing European policies and services, which are the most pioneering in the field of MyData, with the domestic situation. It is expected that this study will provide balanced and progressive ideas in the MyData industry and policies.

• Journal of the Korean Mathematical Society
• /
• v.37 no.5
• /
• pp.822-822
• /
• 2000

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.295-303
• /
• 2008

In general, transform domain adaptive filters show faster convergence speed than the time domain adaptive filters, but the amount of calculation increases dramatically as the filter order increases. This problem can be solved by making use of the subband structure in transform domain adaptive filters. In this paper, to increase the convergence speed on the generalized subband decomposition FIR adaptive filters, a structure of the adaptive filter with subfilter of dyadic sparsity factor in wavelet transform domain is designed. And, in this adaptive filter, the equivalent input in transform domain is derived and, by using the input, the convergence properties for the LMS algorithm is analyzed and evaluated. By using this sub band adaptive filter, the inverse system modeling and the periodic noise canceller were designed, and, by computer simulation, the convergence speeds of the systems on LMS algorithm were compared with that of the subband adaptive filter using DFT(discrete Fourier transform).

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.49-63
• /
• 2017

Interdisciplinary convergence research is widely seen as a collaborative research between different disciplines, which is often driven by common agenda or problems in pursuit of a particular common objective. Thus, the purpose of interdisciplinary cooperation in convergence research is to bring each discipline's unique perspective together with the academic expertise of researchers in order to share common problems that cannot be solved effectively without research partnership. We present empirical evidence on how interdisciplinary research relationships are formed to facilitate research networking in convergence relations. In particular, we used network analysis to investigate how interdisciplinary linkages and convergence research networks has formed over time. We found that the convergence research networks were implemented by the interdisciplinary convergence research support program as intended. We did find that research field with high indegree and outdegree in a network played critical roles on the dynamics and degree of interdisciplinarity. Finally, we could find evidence that the role of liaison brokers triggered relational dynamics in interdisciplinary research collaboration.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.29-35
• /
• 2017

Korea has been showing a high interest in convergence centered on information and communication technologies for the past 10 years. However, with successful convergence of broadcasting and telecommunication sectors, successful convergence cases such as IPTV have been excluded. In some fields, The performance that citizens can experience is limited. In addition, the combination of the Internet of things and the big data shows that infinite data in the natural and social environment surrounding service users can be created and utilized to create better services. However, the division between departments and departments, And the limitations of policies and systems that can promote convergence of information and communication technologies. Therefore, in order to create new industries through the fusion of the Internet of things and big data, it is necessary to investigate what kind of inhibitory enzymes are present, to investigate the problems, to solve the problems, to develop technologies for activating the Internet and big data, And suggests ways to utilize the policy to promote convergence of related technologies.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.515-526
• /
• 2015

Predicting and measuring tunnel convergence is very crucial for estimating tunnel stability and economical construction of NATM tunnels. The method to estimate the tunnel convergence that occurs before and after construction is proposed based on literature reviews. The total displacement occurring related to tunnel construction is determined to be about 2.5 times that of measured displacements. The results of displacement measurements at two tunnels constructed with similar rock types are examined for the investigation of factors affecting the tunnel convergence. The average convergence of Gyungju A Tunnel is about 6.7 times bigger than that of Daejeon B Tunnel. The possible causes of the large convergence in Gyungju A Tunnel are suggested. In order to predict the convergence of tunnels, careful investigation of the geological structures in the ground surface and the influence of external conditions as well as careful face mapping of the tunnel face should be conducted.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.392-397
• /
• 2018

In this paper, the ZnS nanoparticles were synthesized according to the process conditions of hydrothermal synthesis. When the molar ratio of Zn to S was 1:1.2, it was confirmed that it had a cubic single phase and a high crystal phase. After the molar ratio is fixed, hydrothermal synthesis was conducted at $180^{\circ}C$ for 24, 36, 72 and 96 h in order to confirm the structural change with the change of hydrothermal synthesis times. As the hydrothermal synthesis times increased, the particle size increased. The hydrothermal synthesized particle size for 72 h was considered to be suitable for sintering. The ZnS ceramic had a density of 99.7% and an excellent transmittance of ~70% in the long-wavelength region.