• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.112-118
• /
• 2000

In case ESO(evolutionary structural optimization) which is one of topology optimization methods, the element removal ratio is fixed throughout topology optimization by 1 or 2%. As a result it has no flexibility for various types of structures and thus the rate of convergence might not be efficient. Thus various element removal methods were developed in order to improve the efficiency of ESO. In this paper, various element removal methods for ESO are compared with each other for a bracket and a short cantilever. In addition, a new improved bi-directional element removal method is suggested in order to obtain much better optimized topology. From the comparative results of the examples, it is verified that all of the developed various element removal methods are very effective, and the suggested element removal method is the most effective.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.193-200
• /
• 2003

In the production of internal combustion engines, there has been a move towards the development of high performance engines with improved fuel efficiency, lighter weight and smaller sizes. These trends help to answer problems in engines related to thermal load and abnormal combustion. In order to investigate these problems, a thin film-type probe for instantaneously measuring temperatures has been suggested. A method for manufacturing such a probe was established in this study. The instantaneous surface temperature of a constant volume combustion chamber was measured by this probe and the heat flux was obtained through Fourier analysis. In order to thoroughly understand the characteristics of combustion, the authors measured the wall temperature of the combustion chamber and computed heat flux through a cylinder wall while varying the protrusion height of the probe. For achieving the above goals, a instantaneous temperature probe was developed, thereby making possible the analysis of the instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.3
• /
• pp.171-177
• /
• 2007

It is well known that mobile phones have been a indispensable communication tool for human life. The spiral springs are used as the main component of the semi-auto sliding mechanism of mobile phones. The characteristic of axiomatic approach is scientific and analytical method, and axiomatic approach is different from other design methods in offering the systematic method at an early stage of design. The axiomatic approach could determine design parameter and arrange the order of design and estimate the optimum design in good order. In axiomatic approach, the composition is divided by customer requirement, functional requirement, design parameter, and design matrix in large portion. This paper presents design in sliding mechanism for mobile phones by finite element method and axiomatic design.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.5
• /
• pp.419-424
• /
• 2017

The purpose of this study is to develop a virtual testbed capable of predicting the functional performance of a linear electromagnetic actuator for a high voltage relay in order to reduce its development costs and time. The virtual testbed is defined by a multiphysics coupling approach in order to consider the complex interactions of multi-domains such as the solenoid model of electromagnets, the mass-spring-damper model of mechanical systems, the electric circuit model for an external control unit, and the thermal model for predicting temperature variations. The performances of the existing high voltage relay were estimated by the virtual testbed, and then the effectiveness and validation of the proposed testbed were discussed in comparison with the experimental test results. This study showed that the virtual testbed can be applied in design, optimization, and investigation of high voltage relays.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2312-2321
• /
• 2002

The first-order least-squares meshfree method for linear elasticity is presented. The conventional and the compatibility-imposed least-squares formulations are studied on the convergence behavior of the solution and the robustness to integration error. Since the least-squares formulation is a type of mixed formulation and induces positive-definite system matrix, by using shape functions of same order for both primal and dual variables, higher rate of convergence is obtained for dual variables than Galerkin formulation. Numerical examples also show that the presented formulations do not exhibit any volumetric locking for the incompressible materials.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.43-51
• /
• 2000

The response statistics of a hinged-clamped beam under broad-band random excitation is investigated. The random excitation is applied at the nodal point of the second mode. By using Galerkin's method the governing equation is reduced to a system of nonautonomous nonlinear ordinary differential equations. A method based upon the Markov vector approach is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian and non-Gaussian closure methods the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The case of two mode interaction is considered in order to compare it with the case of three mode interaction. The analytical results for two and three mode interactions are also compared with results obtained by Monte Carlo simulation.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1149-1152
• /
• 1999

In this paper we analyzed each region of specific points and ｅ-Δｅphase plane in order to make fuzzy rule base. After we composed the fuzzy control rules which can decrease rise time, delay time, maximum overshoot than basic fuzzy control rules. The composed method are converged more rapidly than single rule base in convergence region. Proposed method is alternately use at specific points of ｅ-Δｅphase plane with two fuzzy control rules, that is one control rule occruing the steady state error used in transient region and another fuzzy control rule use to decrease the steady state error and rapidly converge at the convergence region. Two fuzzy control rules in the ｅ-Δｅ phase plane decide the change time according to response characteristics of plants. As the results of simulation through the second order plant and the delay time plan, Proposed dual fuzzy control rules get the good response compare with the basic fuzzy control rule.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.201-208
• /
• 2003

Since the real steel box girder bridges have a large number of design variables and show complex structural behavior, it would be impractical to directly use the algorithm for its optimum design. Thus, in this study, for optimum design of real steel box girder bridge, approximated reanalysis using an higher-order Improved self-adjusted Convex Approximation (ISACA) which was newly proposed on a previous study by the author is applied for the numerical efficiency. To demonstrate the efficiency, robustness, and convergence of the approximated reanalysis technique using the ISACA, a real bridge having two continuous spans is used as an illustrative example. From the results of the numerical investigation, it may be positively stated that the efficiency, robustness, and convergence of the approximated reanalysis using an ISACA is superior compared with the previous approximated reanalysis techniques.

• Journal of Engineering Education Research
• /
• v.18 no.6
• /
• pp.46-51
• /
• 2015

Recently, Information Communication Technology(ICT) is one of the most important technology that supports the modern society. As the ICT rises, the needs of the nurturing talents, who can develop a service or hardware on the basis of the humanities increases. As a result, teaching programming skills to students studying humanities and social science are essential. Also, it is important to train students studying science and engineering to write their thoughts logically. In order to serve these students, we introduce a pedagogy for computer programming using programming essay. Since a program is a sequence of the operations based on the programmer's logical thinking, programming can be considered as describing programmer's logic in the proper order using programming syntax. In this research, we train students to describe their logic using natural language. Students write down their essays for a given programming problems. Also, we introduce a pedagogy guideline using programming essay.

• Fire Science and Engineering
• /
• v.6 no.1
• /
• pp.17-22
• /
• 1992

We have derived the general transfer equation for governing the continuity, energy transfer, mass and momentum transfer, and turbulent energy dissipation rate within the fire compartment which has the 800t fire source at the center of the floor. The governing transfer equations have been descretized using the finite volume approach and numerically experimented under the SIMPLE algorithm. In order for the SIMPLE algorithm approach to be physically reliable, the test results are compared with those of Morita's SOR Method using Conjugate Residual Method and found to be close to physical values though the computational convergence time still remains to be upgraded. The treatment of source terms in the system of finite difference equations has been critical in order to converge the governing equations within the appropriate time steps. The criteria of convergence allowance for the whole domain have been checked and the sudden change of the non-linear effects from the source term have been avoided. The criteria has been allowed to be for 5$\times$10$^{-5}$ .