• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.104-109
• /
• 2019

Damage caused by wild animals such as pheasants and magpies is a problem in rural areas. A bird repellent system based on sensing and repelling farm pest animals and birds is proposed herein. This system is equipped with a bird model part on a supporting platform and comprises a sound source generator, a system control user interface, and a sensor in the center. The sensor is composed of an illuminance sensor and a PIR sensor. The illuminance sensor distinguishes between day and night, whereas the PIR sensor detects birds or wild animals and outputs them from the sound generator. The entire system can be managed easily by the user interface and system control.

• 열처리공학회지
• /
• 제36권4호
• /
• pp.237-241
• /
• 2023

Recently, research on flexible sensors for personal health management has been gaining attention. In this study, we fabricated a crack-based flexible sensor in thin film form to measure the pulse on the wrist. We evaluated the characteristics of the sensor based on the curing conditions of the PDMS (Polydimethylsiloxane) film to optimize the sensor's gauge factor. The modulus of PDMS varies depending on the curing conditions. In this case, the modulus of PDMS has a significant influence on crack formation, leading to changes in the sensitivity of the sensor. This study examined the changes in the gauge factor associated with these variations.

• 센서학회지
• /
• 제28권3호
• /
• pp.157-163
• /
• 2019

The LiDAR sensor, which is widely regarded as one of the most important sensors, has recently undergone active commercialization owing to the significant growth in the production of ADAS and autonomous vehicle components. The LiDAR sensor technology involves radiating a laser beam at a particular angle and acquiring a three-dimensional image by measuring the lapsed time of the laser beam that has returned after being reflected. The LiDAR sensor has been incorporated and utilized in various devices such as drones and robots. This study focuses on object detection and recognition by employing sensor fusion. Object detection and recognition can be executed as a single function by incorporating sensors capable of recognition, such as image sensors, optical sensors, and propagation sensors. However, a single sensor has limitations with respect to object detection and recognition, and such limitations can be overcome by employing multiple sensors. In this paper, the performance of an eight-channel scanning LiDAR was evaluated and an object detection algorithm based on it was implemented. Furthermore, object detection characteristics during daytime and nighttime in a real road environment were verified. Obtained experimental results corroborate that an excellent detection performance of 92.87% can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.63-63
• /
• 2008

Environmental monitoring sub-system has been developed using gas sensor module, Bluetooth module and PDA phone. The gas sensor module consists of $NO_2or$ CO gas sensor and signal processing chips. Gas sensor is composed of the micro-heater, sensing electrode and sensing material. Metal oxide nano-material was selectively deposited on a substrate with micro-heater and was integrated to the gas sensor module. The change in resistance of the metal oxide nano-material due to exposure of oxidizing or deoxidizing gases is utilized as the principle of this gas sensor operation mechanism. This variation detected in the gas sensor module was transferred to the PDA phone by way of Bluetooth module.

• ETRI Journal
• /
• 제30권5호
• /
• pp.644-652
• /
• 2008

In this paper, a low-power CMOS interface circuit is designed and demonstrated for capacitive sensor applications, which is implemented using a standard 0.35-${\mu}m$ CMOS logic technology. To achieve low-power performance, the low-voltage capacitance-to-pulse-width converter based on a self-reset operation at a supply voltage of 1.5 V is designed and incorporated into a new interface circuit. Moreover, the external pulse signal for the reset operation is made unnecessary by the employment of the self-reset operation. At a low supply voltage of 1.5 V, the new circuit requires a total power consumption of 0.47 mW with ultra-low power dissipation of 157 ${\mu}W$ of the interface-circuit core. These results demonstrate that the new interface circuit with self-reset operation successfully reduces power consumption. In addition, a prototype wireless sensor-module with the proposed circuit is successfully implemented for practical applications. Consequently, the new CMOS interface circuit can be used for the sensor applications in ubiquitous sensor networks, where low-power performance is essential.

• ETRI Journal
• /
• 제30권5호
• /
• pp.696-706
• /
• 2008

With the increasing need for intelligent environment monitoring applications and the decreasing cost of manufacturing sensor devices, it is likely that a wide variety of sensor networks will be deployed in the near future. In this environment, the way to access heterogeneous sensor networks and the way to integrate various sensor data are very important. This paper proposes the common system for middleware of sensor networks (COSMOS), which provides integrated data processing over multiple heterogeneous sensor networks based on sensor network abstraction called the sensor network common interface. Specifically, this paper introduces the sensor network common interface which defines a standardized communication protocol and message formats used between the COSMOS and sensor networks.

• ETRI Journal
• /
• 제30권4호
• /
• pp.516-525
• /
• 2008

This paper proposes a compact, energy-efficient, and smart gas sensor platform technology for ubiquitous sensor network (USN) applications. The compact design of the platform is realized by employing silicon-on-insulator (SOI) technology. The sensing element is fully integrated with SOI CMOS circuits for signal processing and communication. Also, the micro-hotplate operates at high temperatures with extremely low power consumption, which is important for USN applications. ZnO nanowires are synthesized onto the micro-hotplate by a simple hydrothermal process and are patterned by a lift-off to form the gas sensor. The sensor was operated at $200^{\circ}C$ and showed a good response to 100 ppb $NO_2$ gas.

• 로봇학회논문지
• /
• 제16권4호
• /
• pp.291-298
• /
• 2021

In this study, we present a multi-sensor module for snake robot searching survivors in a narrow space. To this end, we integrated five sensor systems by considering the opinions of the first responders: a gas sensor to detect CO₂ gases from the exhalation of survivors, a CMOS camera to provide the image of survivors, an IR camera to see in the dark & smoky environment, two microphones to detect the voice of survivors, and an IMU to recognize the approximate location and direction of the robot and survivors. Furthermore, we integrated a speaker into the sensor module system to provide a communication channel between the first responders and survivors. To integrated all these mechatronics systems in a small, compact snake head, we optimized the positions of the sensors and designed a stacked structure for the whole system. We also developed a user-friendly GUI to show the information from the proposed sensor systems visually. Experimental results verified the searching function of the proposed sensor module system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.3011-3024
• /
• 2021

Pose estimation of the sensor is important issue in many applications such as robotics, navigation, tracking, and Augmented Reality. This paper proposes visual-inertial integration system appropriate for dynamically moving condition of the sensor. The orientation estimated from Inertial Measurement Unit (IMU) sensor is used to calculate the essential matrix based on the intrinsic parameters of the camera. Using the epipolar geometry, the outliers of the feature point matching are eliminated in the image sequences. The pose of the sensor can be obtained from the feature point matching. The use of IMU sensor can help initially eliminate erroneous point matches in the image of dynamic scene. After the outliers are removed from the feature points, these selected feature points matching relations are used to calculate the precise fundamental matrix. Finally, with the feature point matching relation, the pose of the sensor is estimated. The proposed procedure was implemented and tested, comparing with the existing methods. Experimental results have shown the effectiveness of the technique proposed in this paper.

• 한국정보통신학회논문지
• /
• 제26권1호
• /
• pp.7-14
• /
• 2022

센서 레지스트리 시스템(Sensor Registry System, SRS)은 이기종 센서 네트워크에서 의미적 상호운용성 유지를 위해 개발되었다. SRS는 위치 정보를 기반으로 주변 센서와 모바일 기기와의 연결 여부를 확인하며, 연결이 되었을 때 센서의 메타데이터를 제공한다. 성공적으로 연결되는 주위의 센서를 식별하는 과정을 센서 필터링이라고 정의한다. 이러한 센서 필터링의 성능 개선이 SRS 연구의 핵심 주제 중 하나이다. 실제 상황에서, GPS에서 제공된 잘못된 위치 정보로 인해 센서 필터링이 실패하는 경우가 발생한다. 따라서 이 논문에서는 지리적 임베딩과 뉴럴 네트워크 기반 경로 예측을 이용한 새로운 센서 필터링 방법을 제안하고 몬테카를로 접근방법을 통해 서비스 제공률을 평가한다. 실증 연구에서, 제안 방법이 위치 정보 이상 문제를 개선하고 SRS 센서 필터링에 효과적인 모델임을 보였다.