• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.3
• /
• pp.235-242
• /
• 2016

Purpose: This study was to investigate whether the application of different diagnostic criteria affected the frequency of convergence insufficiency (CI). Methods: Eighty one subjects with mean age of 22.54 years (20 to 27 years) were evaluated. Binocularity tests after refraction were performed as the following tests: near point of convergence (NPC) with an accommodative target, phoria using von Graefe method, positive fusional vergence (PFV) with a phoropter. Subjects with CI were diagnosed when exophoria (exo) was greater at near than at distance ($exo{\geq}4{\Delta}$, or >$6{\Delta}$), fusional vergence was $PFV{\leq}11{\Delta}$ for blur, $PFV{\leq}15{\Delta}$ for break, Sheard's or Percival's criterion, and NPC was $NPC{\geq}6cm$, ${\geq}7.5cm$ or >10 cm. Results: Frequency of CI with one diagnostic criterion was ranged from 6.2% to 77.8%, and was overestimated or underestimated according to criteria. It was reduced to the range of 6.2% to 43.2% with diagnostic criteria more than two, especially to the range of 24.7% to 28.4% with lower variability in diagnostic criteria including phoria and Sheard's criterion. There were high relationship between total score of signs and phoria score (r = 0.772, p<0.001), and measured phoria and Sheard's criterion (r = -0.654, p<0.001), but NPC had a high variability and a weak or no significant relationship with other diagnostic criteria. Results suggested $exo{\geq}4{\Delta}$, Sheard's criterion and $NPC{\geq}7.5cm$ for diagnostic criteria of signs and sequence for CI. Conclusions: Frequency of CI is likely to be over- and underestimated with diagnostic criteria. Cutoff values and procedures for phoria, Sheard's criterion and NPC as clinical signs should be suggested definitely in diagnosis associated with CI.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.113-120
• /
• 2021

The objective of this study is to identify the visual function impairment of children with each type of attention deficit hyperactivity disorder(ADHD). The subjects of this study were 49 children diagnosed with ADHD with visual function out of the normal range. The type of ADHD was investigated using the Korean-ADHD Rating Scale and visual function test. The attention deficit type(69.4%) of ADHD was the most common type among children with ADHD with vision problems. Although their overall naked-eye visual acuity was good, about 50% of the subjects showed problems with visual function. For those with the attention deficit type of ADHD, the myopia-related refractive error was high. For those with the hyperactivity type of ADHD, the astigmatism-related refractive error was higher. For those with vergence function disorder, convergence insufficiency was the most common. As there were differences in the visual impairment characteristics of children with different types of ADHD, it is necessary to approach a child's problem behavior through examination and screening for visual function disorders.

• Convergence Security Journal
• /
• v.14 no.3_1
• /
• pp.3-9
• /
• 2014

NCOs of the amy-navy-air force are the foundation in maintaining, developing and leading the army making manpower aquisition very important. Currently, the operation or the recruitment business is being overlapped by each training institutions leading to uneffectively decreasing the curiosities of the applicants regarding their future. Even though the NCO selection policy is strong in the aspect of retaining uniqueness, use of acquired specialist, and statute revision, it is showing insufficiency in publicizing, selection effectiveness, promotion of peoples' conveniency, and budget reduction. Therefore, if the unification regarding the recruitment of each military sectors are run by the MMA(Military Manpower Administration), which is the institute that is fully responsible for the recruitment duty, it can acquire excellent man power while decreasing effort and resources, provide accurate information to the NCO applicants on time, and provide improved services through the convenient facilities and systems.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.1
• /
• pp.45-52
• /
• 1999

It is difficult to keep the balance of supply and demand for natural aggregates in recent years, because natural resources have become to be almost exhausted. Crushed stone is already used for coarse aggregate instead of river gravel at present. Now, crushed sand or sea sand should be used for fine aggregate, because natural sand also has been exhausted with a few exceptions around Nakdong River. The sea sand has a lot of problems which are the corrosion of reinforcement bars, the investment of facility for cleansing salt and the cost increase due to the insufficiency of industrial water. Therefore, it is necessary to produce and to utilize the crushed sand very actively, but some material properties which are related to water absorption, strength and chemical durability, prevent from determining the generalized criteria because its rocks make much differences in its physical and chemical characteristics. In this paper, fundamental physical properties of crushed sand, which comes from Daegu Subway construction fields, have been investigated for the usability on basic material of concrete. The optimum replacement ratio and the strength estimation method of crushed sand replacing natural sand also have been presented here through the compressive strength test of ready-mixed concrete cylinders.

• Journal of Information Processing Systems
• /
• v.14 no.2
• /
• pp.448-454
• /
• 2018

Artificial bee colony (ABC) algorithm has attracted significant interests recently for solving the multivariate optimization problem. However, it still faces insufficiency of slow convergence speed and poor local search ability. Therefore, in this paper, a modified ABC algorithm with bees' number reallocation and new search equation is proposed to tackle this drawback. In particular, to enhance solution accuracy, more bees in the population are assigned to execute local searches around food sources. Moreover, elite vectors are adopted to guide the bees, with which the algorithm could converge to the potential global optimal position rapidly. A series of classical benchmark functions for frequency-modulated sound waves are adopted to validate the performance of the modified ABC algorithm. Experimental results are provided to show the significant performance improvement of our proposed algorithm over the traditional version.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.63-67
• /
• 2017

In bioscience and biotechnology, the research of fundamental life mechanisms and their diseases caused by insufficiency is important. The study of a whole organism is difficult and sometimes impossible because of DNA, RNA, proteins, cellular organelles, various cells, and organs. Cell cultures can provide a simple method for researching cellular mechanisms and conditions, both in terms of physiological performance, and in response to chemical stimulation. According to conventional cell culture methodology, the flat surface is used with surface treatments for cell adhesion on the surface. Micro- and nanoscale patterns have been developed with chemical and biochemical modifications for cell immobilization. In this study, HeLa cell culture on nanostructures patterns was studied, including the 300 nm line and 150 nm pillar structures, using nanoimprint lithography and pyrrole as a biocompatible conducting polymer.

• Convergence Security Journal
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2006

The exponential increase of malicious and criminal activities in cyber space is posing serious threat which could destabilize the foundation of modem information society. In particular, unexpected network paralysis or break-down created by the spread of malicious traffic could cause confusion and disorder in a nationwide scale, and unless effective countermeasures against such unexpected attacks are formulated in time, this could develop into a catastrophic condition. As a result, there has been vigorous effort and search to develop a functional state-level cyber-threat early-warning system however, the efforts have not yielded satisfying results or created plausible alternatives to date, due to the insufficiency of the existing system and technical difficulties. The existing cyber-threat forecasting and early-warning depend on the individual experience and ability of security manager whose decision is based on the limited security data collected from ESM (Enterprise Security Management) and TMS (Threat Management System). Consequently, this could result in a disastrous warning failure against a variety of unknown and unpredictable attacks. It is, therefore, the aim of this research to offer a conceptual design for "Knowledge-based Real-Time Cyber-Threat Early-Warning System" in order to counter increasinf threat of malicious and criminal activities in cyber suace, and promote further academic researches into developing a comprehensive real-time cyber-threat early-warning system to counter a variety of potential present and future cyber-attacks.

• Journal of Institute of Convergence Technology
• /
• v.5 no.1
• /
• pp.13-17
• /
• 2015

In wafer level molding progress, the thermal releasing failure phenomenon is shown up as the important problem. This phenomenon can cause the problem including the warpage, crack of the molded wafer. The thermal releasing failure is due to the insufficiency of adhesion strength degradation of the molding tape. To solve this problem, we studied experimental method increasing the release property of the molding tape through the plasma surface treatment on the wafer substrate. In this research, the vacuum plasma treatment system is used for release property improvement of the molding tape and controls the operating condition of the hydrophilic($O_2$, 100kW, 10min) and hydrophobic($C_2F_6$, 200kW, 10min). In order to perform the peeling test for measuring the releasing force precisely, we remodel the micro scale material property evaluation system developed by Korea institute of industrial technology. In case of hydrophilic surface treatment on the wafer substrate, we can figure out the releasing property of molding tape increase. In order to grasp the effect that it reaches to the release property increase when repeating the hydrophilic treatment, we make an experiment with twice treatment and get the result to increase about 12%. We find out the hydrophilic surface treatment method using plasma can improve releasing property of molding tape in the wafer level molding process.

• Convergence Security Journal
• /
• v.15 no.4
• /
• pp.73-82
• /
• 2015

Thanks to popularization of smart phone, mobile payment market is growing rapidly. As the obligatory use of digital certificate is abolished, easy-to-use payment that can settle with only password is being launched one after another. But its spreading speed is not fast highly. Because of concern about personal information leakage and security, unchangeability of payment habit, insufficiency of consumer protection, inadequacy of payment infrastructure and all sorts of regulations, easy-to-use payment is not activated. Recently global IT companys are entering mobile payment market competitively. It is because the sense of crisis that their survival can be dangerous from now on if they get left behind Fintech innovation and the mentality that they try to take the leadership of mobile payment market process. In this situation, the thorough preparation and a lot of effort are required to promote our autonomous easy-to-use payment growth without dependance on foreign country's. In this paper, the problems of local mobile easy-to-use payment are addressed in depth and the activation measures such as flexible and discriminative security, construction of customer protection system, law system maintenance, service differentiation are proposed.

• Journal of the Korea Convergence Society
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2013

This paper is the product development of environment and safety. In growing society, the bicycle is need to have a common goals for consumers convenience and theft prevention. The bicycle is movable means. But as times passed, that bicycle is strongly recommended to replace other vehicles because that is not produced to air pollution and energy(gas, diesel etc) insufficiency. As workers using a bicycle are increased, road for only bicycle is made by additionary. The bicycles happens to several moving accidents such as car accidents because of signal mismatch between bicycle users. However, using the development products of this paper, many accident problems for bicycle can be solved. As increasing of bicycles numbers, the high cost bicycles are too increased. So, the more theft of bicycle is also happened. The developed products(turn signal system and theft prevention system) through this study kept your bicycles from more convenience and more safe.