• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.165-171
• /
• 2018

In this study, to analyze the detection of limit for sensitivity of the influenza rapid antigen test kit, the positive detection of limits were analyzed by serial dilution of influenza virus A and B type for five influenza rapid antigen test kits in Korea. As a result of analysis, visual measurement of type A were up to 1:8192 for the Wellsbio product and up to 1:4096 for the II product, up to 1:512 for the I and III products, and only 1:128 for the IV product, and type B were positive for up to 1:8192 for the Wellsbio product, up to 1: 4096 for the II product and up to 1:1024 for the I, III and IV products. For instrument readings with the same specimen, both A and B types were found to be positive for up to 1:8192 for the Wellsbio product, up to 1: 4096 for the II product, and up to 1:2048 for the I product. The sensitivity of the rapid antigen test for influenza differs greatly depending on the sampling area of the patient, infection period, specimen volume, etc. Therefore, it is necessary to observe exactly the collection timing and method of the specimen. And it is necessary further study to improve the sensitivity for influenza rapid antigen test.

• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.19-24
• /
• 2020

In the present study, using biological information of bacteria and biochemical information of chlorine dioxide gas, Gram-positive bacteria, e.g., Alloiococcus otitis, Erysipelothrix rhusiopathiae, Staphylococcus caprae, Staphylococcus lentus, and gram-negative bacteria, e.g., Acinetobacter baumannii complex, Aeromonas salmonicida, Brucella melitensis, Oligella ureolytica were used whether a plastic kit to release ClO₂ gas could inhibit their growth. Overall, chlorine dioxide gas showed about 99% inhibition of bacterial growth, with less than 10 CFU. However, it was found that Gram positive Alloiococcus otitis and Gram negative Aeromonas salmonicida had more than about 50 CFU. When comparing the results of experiments with several bacteria, it suggested that the concentration of chlorine dioxide gas would be at least 10 ppm to 400 ppm for the bacterial inhibition. The results of this study could be used as basic data to evaluate the clinical usefulness of chlorine dioxide gas. If this study helps with prior knowledge to help clinicians to recognize and prevent the presence of micro-organisms that cause infections in hospitals, it would be helpful for activities such as patient care as a convergence field. In the future, it is considered that the research results will be the basis for rapidly inhibiting the microbes infected with patients by utilizing data of the information of the microbes that are inhibited for chlorine dioxide gas.

• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.33-38
• /
• 2020

It was reported that a mobile application was designed to easily provide natural dyeing information such as natural dye related resources, colors and dyed fabrics in 2007. Since studies on the linkage, application, etc. between natural dye dyeing and IoT are still lacking, diversity of information on the change of dyeing pattern by natural dye dyeing is required. In this study, it was to construct dyeing information by natural dyes, e.g., Lithospermum erythrorhizon, on silk, which has been traditionally used as many fibers in Korea. The extraction of the dye from L. erythrorhizon was carried out under pH4. The dried root of L. erythrorhizon showed dark brownish purple. Silk fabric by a without a mordant typically showed a purple dyed pattern. In the staining by sodium tartrate plus citric acid, silk fabric was stained clear brown. Interestingly, the mordant of iron (II) sulfate, the silk fabric was dyed in a light gray color rather than black. When the mordant of aluminum potassium sulfate was treated with L. erythrorhizon-extracted dye, the results were almost the same as when the mordant was not treated. When the degree of dyeing was evaluated numerically, the treatment of the mordant of potassium dichromate was about 50% darker, and the dyeing by iron (II) sulfate was about 75% darker. These results will be helpful in the study of applying various dye colors using L. erythrorhizon, and it will provide information on dyeing controller and database system construction by dyeing parameters such as dyeing degree, pH concentration, and chromaticity change.

• Journal of Internet of Things and Convergence
• /
• v.7 no.4
• /
• pp.35-41
• /
• 2021

Natural dyeing has traditionally been used in many countries around the world, and as natural dyes are diversified, the diversity of dyeing patterns is also expanding. This study tried to establish standardization by providing numerical values that could provide quantified information to the Internet of Things by more accurately analyzing the color changes of dyes and mordants for the four natural dyes. The addition of copper acetate, iron II sulfate and potassium dichromate to the dye extracted from Juglans regia Linn changed the original color of brown to other colors of purple, khaki and dark brown, respectively. Except for potassium dichromate added to Sophora japonica L. or Phellodendron amurense Ruprecht, the concentration of other mordants was reduced, but the color difference of the dyed silk was very large. However, although there is a difference in degree, copper acetate and iron sulfate induced color changes of 35% and 15%, respectively. In summary, it was confirmed that the highest color change was induced when 15 grams of copper acetate was added to J. regia Linn, S. japonica L. and P. amurense Ruprecht and 150 grams of iron to Phytolacca americana. The results of this study suggested that the accurate color change by various mordants can be utilized as important information that enables more accurate color induction by dyes and mordants.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.27-33
• /
• 2023

In this study, it was analyzed with the dyeing pattern of Diospyros kaki Thunb (persimmon) and was tried to numerically evaluate how the dyeing pattern in silk fabrics and cells was changed by different mordants. When the dyed silk fabrics were sufficiently dried, the silk fabrics were found to have a pale yellow color. Interestingly, iron II sulfate mordant changed the color change the most, silk fabrics were dyed with a color close to brown or dark purple. For numerical analysis, 19% and 62.5% color changes could be induced by sodium tartrate plus citric acid and copper acetate, respectively. Iron II sulfate induced the greatest difference than that of untreated mordants at 88%. About 5% and 10% of Chinese hamster ovary (CHO) cells were stained by sodium tartrate plus citric acid and copper acetate, respectively. The staining effect induced by iron II sulfate was about 2.4 times higher than the staining effect by sodium tartrate plus citric acid. In previous studies, staining results have been visually confirmed. However, this results not only visually confirmed the dyeing, but also quantified the color change. In particular, if numerical results are continuously integrated into big data, any researcher will be able to easily obtain similar results even if the method, time, volume, etc. are changed. In addition, the numerical data of this study is considered to be an important basis for building a database for IoT construction and computer analysis.

• The Journal of Korean Medicine
• /
• v.45 no.1
• /
• pp.182-201
• /
• 2024

Objectives: This study was conducted to develop a standard acupotomy consent form that takes into account the unique characteristics of Korean Medicine. The study was motivated by the increasing importance of patient autonomy and the growing number of legal disputes related to medical malpractice in the clinical field of Korean Medicine. Methods: The analysis phase of the study involved a survey of the current status of acupotomy consent forms in Korean Medicine hospitals nationwide. The items of each form were analyzed based on the contents of the Medical law and the standard contract for medical procedures of the Fair Trade Commission (FTC). In the development and evaluation phase, the items and contents of the acupotomy consent form were evaluated using a 5-point Likert scale and content validity was assessed through two rounds of Delphi surveys. In the improvement phase, the contents of the consent form were revised based on the results of a survey of inpatient and outpatient patients in the Department of Acupuncture and Moxibustion at Pusan National University Korean Medicine Hospital, and real-time online meeting. The final version of the standard acupotomy consent form was completed after undergoing proofreading and corrections by a linguistics expert. Results: Only 30% of Korean Medicine hospitals have implemented acupotomy consent forms. The items of the consent forms did not fully include the items presented in the Medical act and the standard contract for medical procedures of the FTC. To address this issue, two rounds of Delphi surveys and a real-time discussion were conducted with a panel of 12 experts on 27 preliminary items of consent forms. The items and contents that met the criteria for content validity ratio, convergence, and consensus were derived. Based on the derived items and content, a standard acupotomy consent form was developed. Conclusions: The standard consent form for acupotomy is anticipated to ensure patient autonomy and enhance transparency and liability in acupotomy. Furthermore, it is expected to serve as evidence in case of medical disputes related to acupotomy and contribute as a reference document for the development of standard consents forms for various procedures of Korean Medicine. However, the limitations of the study include that the survey of consent forms was limited to only training hospitals of Korean Medicine, and the standard consent form is only applicable to adults in Korea. Future studies are needed to address these limitations.