• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.114-121
• /
• 1997

Latex Coated Urea(LCU) was compared with ordinary urea under different methods of application in terms of N use efficiency and yield of rice, 1995 and 1996. The study was carried out on Jeonbug silty clay loam, in Honam Agricultural Experiment Station. The fertilizer treatments involved (1) conventional application of urea (44kg N/ha at transplanting, 33kg N/ha at five leaves stage, 33kg N/ha. (4) 55kg N/ha at transplanting and 33kg N/ha as urea at panicle initiation stage, and (5) without N. It was found that by combining LCU(as basal application) and urea(as topdressing at panicle initiation stage), at the rate of 80% of conventional rate with ordinary urea is most effective for the saving of N and increasing the use efficiency of N by rice. It was, however, observed that the efficacy of LCU was affected by the temperature during the growth of rice.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.185-194
• /
• 2017

This technical paper is a study on the unique displacements of Shotcrete Lining at the mined tunnel during excavation period through deep consideration with real time data from monitoring instrumentations correlation with the numerical analysis to identify the rock stresses and the rock spring points at the working face of the Conventional tunnelling by the Drill and Blast, based on the geological face mapping results of the project NS2, Transmission cable tunnel project in Singapore. The created geometry of numerical model was prepared to the real mined tunnel construction site including, vertical shaft, construction adit, tunnel junction area, and 2 enlargement caverns. The convergence measurements by the monitoring instrumentation were performed during the tunnel excavation and shaft sinking construction stages to guarantee the safety of complicated underground structures.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.290-297
• /
• 1997

Underwater robotic vehicles(URVs) are used for various work assignments such as pipe-lining, inspection, data collection, drill support, hydrography mapping, construction, maintenance and repairing of undersea equipment, etc. As the use of such vehicles increases the development of vehicles having greater autonomy becomes highly desirable. The vehicle control system is one of the most critic vehicle subsystems to increase autonomy of the vehicle. The vehicle dynamics is nonlinear and time-varying. Hydrodynamic coefficients are often difficult to accurately estimate. It was also observed by experiments that the effect of electrically powered thruster dynamics on the vehicle become significant at low speed or stationkeeping. The conventional linear controller with fixed gains based on the simplified vehicle dynamics, such as PID, may not be able to handle these properties and result in poor performance. Therefore, it is desirable to have a control system with the capability of learning and adapting to the changes in the vehicle dynamics and operating parameters and providing desired performance. This paper presents an adaptive and learning control system which estimates a new set of parameters defined as combinations of unknown bounded constants of system parameter matrices, rather than system parameters. The control system is described with the proof of stability and the effect of unmodeled thruster dynamics on a single thruster vehicle system is also investigated.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.261-267
• /
• 2005

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.152-162
• /
• 1975

Five barley varieties were compared under six 1evels of nitrogen fertilization and two methods of cultural management, conventional and drill seeding. The increase in grain yield and nitrogen content of the leaves showed a significant linear regression from added increaments of nitrogen in Haganemugi and Olbori, particulary under drill seeding. The other varieties resulted in various degrees of lodging and no significant increases in yield. The spike number per square meter was the major component of yield, but when the spike number per square meter was sufficient, 1000 grain weight was equally as important as a component of yield.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.82-85
• /
• 2009

Purpose: In anterior cruciate ligament (ACL) reconstruction, preservation of the remnant original tissue might promote graft healing and be helpful in proprioception. But this procedure is difficult and causes the notch impingement. So we introduce a surgical technique that makes a transtibial femoral tunnel at 10 or 2 o'clock position with preservation of remnant tissue. Surgical approach: We tried to preserve the remnant tissue and synovium as much as possible, especially those of tibial attachment and extending to the posterior cruciate ligament (PCL), so as to have some tension and to prevent notch impingement. We set the tibial drill guide at 40~45 degrees and the intra-articular guide tip was 1 mm anterior and medial to the conventional site. The starting point of tibial guide pin was proximal to the pes anserinus and anterior to the medial collateral ligament. When the reamer approached the cortical bone of the tibial articular surface, the reamer must be advanced very carefully to minimize injury to the remnant tissue. The tibial and femoral tunnel at 10 or 2 o'clock position were made with the reamer, the diameter of which was same with that of the graft. Conclusion: We report a remnant preserving technique in ACL reconstruction that makes a transtibial femoral tunnel at 10 or 2 o'clock position

• Resources Recycling
• /
• v.26 no.6
• /
• pp.65-72
• /
• 2017

APT (Ammonium paratungstate) is widely used in various industries such as metal cutting tools, drill bits, mining tools, and military inorganic materials. In order to produce high purity APT(S), an impurity purification step in an aqueous $Na_2WO_4$ convert $H_2WO_4$ solution is required. It is difficult to remove impurity Na of 200 ppm or less when $H_2WO_4(S)$ is prepared by adding HCl(Aq) to an aqueous solution of $Na_2WO_4$, which is a well-known conventional wet method. However, in this study, a more economical and efficient method of removing Na through electrodialysis using a cationic membrane was studied. A large amount of Na in aqueous solution of $H_2WO_4$ due to $Na_2CO_3(S)$ which was added to dissolve waste tungsten carbide drill and scrap was removed to 20ppm or less through electrodialysis process, and it was confirmed that the effect of Na removal was great when using electrodialysis.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.277-291
• /
• 2020

Shield TBM is a tunnelling method that has a wider range of applications in the poor ground condition compared to conventional tunnels (Drill and Blast). Currently, a 13.3 m large-diameter slurry shield TBM is preparing for construction to pass under the Han River. Shield TBM is divided into slurry and EPB shield TBM, and management items during construction are different depending on each characteristic. In this paper, the equipment type, origin, application case and trouble case were analyzed for slurry shield TBM, which is mainly constructed in soft ground. In addition, 2D and 3D model tests were conducted on the condition of soil depth for the possibility of slurry leakage into front of the equipment, with appropriate chamber pressure. Based on this paper, it proposed to provide basic and reference data for proper excavation surface pressure and chamber pressure during construction of slurry shield TBM under soft ground conditions, and proposed measures to minimize stability and environmental decline due to slurry ejection.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.292-297
• /
• 2006

A research was carried out to investigate the release pattern of slow release nitrogen fertilizer compound(SRNC) that is latex coated urea(LCU) and to recommend the application rate of the fertilizer at dry seeding rice culture in Honam plain area. The experiment was conducted at experimental field(Jeonbug series, fine silty, mixed, nonacid, mesic family of Fluvaquentic Endoaquepts) of National Honam Agricultural Research Institute. A medium late maturing rice variety (Dongjinbyeo) was seeded at the rate of $60kg\;ha^{-1}$ by drill seeder on April 1, 1997 and March 30, 1998. Fertilizer application rate was $160-90-110kg\;ha^{-1}$ for $N-P_2O_5-K_2O$. Soil ammonium nitrate($NH_4-N$) contents remained higher in all SRNC plots than conventional ones and higher with the increase of SRNC application rate until panicle formation stage, but the contents was higher in the conventional than NRNC plots at the heading stage. The plant hight was taller in SRNC than conventional plots until maximum tiller stage, but became similar in both conventional and SRNC plots at heading stage. The culm and panicle number was greater in SRNC than conventional plots throughout all growth stage, but the effective tiller rate was higher in conventional ones. Nitrogen efficiency was higher in the SRNC than conventional plots, but the efficiency was decreasing with the higher SRNC level. The spikelet number per unit area was greater in SRNC than conventional plots, and increased with higher SRNC level. The more spikelet number with higher NRNC level resulted in lower 1,000-grain weight. The rice yield in conventional plot was similar with only 60% SRNC level, but lower than 80% and 100% SRNC levels. However, slight lodging was observed in 100% SRNC level. In conclusions, we recommend NRNC application level as 80% of standard nitrogen application for early dry seeding culture of rice Honam plain area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.207-214
• /
• 2015

Due to the limitations of conventional removable partial denture prostheses to treat a cleft lip & palate patient who shows scar tissue on upper lip, excessive absorption of the maxillary residual alveolar ridge, and class III malocclusion with narrow palate and undergrowth of the maxilla, 4 implants were placed on the maxillary edentulous region and a maxillary removable implant-supported partial denture was planned using a CAD/CAM milled titanium bar. Unlike metal or gold casting technique which has shrinkage after the molding, CAD/CAM milled titanium bar is highly-precise, economical and lightweight. In practice, however, it is very hard to obtain accurate friction-fit from the milled bar and reduction in retention can occur due to repetitive insertion and removal of the denture. Various auxiliary retention systems (e.g. $ERA^{(R)}$, $CEKA^{(R)}$, magnetics, $Locator^{(R)}$ attachment), in order to deal with these problems, can be used to obtain additional retention, cost-effectiveness and ease of replacement. Out of diverse auxiliary attachments, $Locator^{(R)}$ has characteristics that are dual retentive, minimal in vertical height and convenient of attachment replacement. Drill and tapping method is simple and the replacement of the metal female part of $Locator^{(R)}$ attachment is convenient. In this case, the $Locator^{(R)}$ attachment is connected to the milled titanium bar fabricated by CAD/CAM, using the drill and tapping technique. Afterward, screw holes were formed and 3 $Locator^{(R)}$ attachments were secured with 20 Ncm holding force for additional retention. Following this procedure, satisfactory results were obtained in terms of aesthetic facial form, masticatory function and denture retention, and I hereby report this case.