• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.168-170
• /
• 1994

Carbide-tipped twist drill of new type which is better than traditional H.S.S twist drill has been developed successfully to drill steel work-pieces with high speed. This new carbide drill consists of a characteristic flature of special shape of cutting edge, chip pocket, and flute. The special design of the chip pocket and the flute guarantees both periodic fracture and smooth transport of chips along the flute. The carbide-tipped twist drill also allows one to apply more drilling force than conventional one and produce holes with high accuracy.

• The Journal of the Korean dental association
• /
• v.53 no.5
• /
• pp.368-376
• /
• 2015

Purpose : The objective of this research was to develop a more simplified drilling procedure with an enhanced implant drill. Materials and Methods : The drill enhanced design factors enabled implantation of Dia. 5.0mm fixture with only 2 times drilling which is more simplified drilling procedure. The enhanced drill was designed with 2 flutes, 2-phase or 3-phase formed drill tip and 25 degrees of helix angle. The proposed drilling procedure (2 times) was compared with a general drilling process (4 times) in terms of temperature changes, cutting time and ISQ value. Results : The simplified drilling procedure indicated less heat than a conventional drilling procedure (p<0.05). The enhanced drill showed significantly shorter drilling time than a conventional drill (p<0.05). On the other hand, higher insertion torque and ISQ value were observed on the the suggested drilling procedure than the conventional drilling procedure (p<0.05). Conclusion : A simplified drilling procedure with the newly designed drill could provide higher effectiveness and safety of dental implant operations under properly controlled external conditions, such as irrigation and RPM of drilling.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.102-102
• /
• 2022

More than 74% of forage crops in Korea are cultivated in winter rice fields. Italian ryegrass (IRG) can be said to be a representative forage crop, but over 70% of its seeds are dependent on imports. In addition, there are concerns that the stable supply of research fees may be disrupted due to the effects of climate change, war, and other factors. Therefore, it is necessary to secure a large production area for stable supply. Korea's reclaimed land area is 135,000 ha and its agricultural area is 112,000 ha. Therefore, this study attempted to apply IRG to the domestic IRG seed industry through stable cultivation techniques on reclaimed land. In this study, IRG 'Kowiearly' varsity was cultivated in late October 2020 and early October 2021 in the Saemangeum reclaimed land. The seeding methods were conventional drill sowing seeding, new technology spot seedling (30 × 18 cm) and new technology drill sowing seeding. The amount of sowing was conventional drill sowing seeding 2.0(kg/10a), new technology spot seedling 1.5(kg/10a), and new technology drill sowing seeding 1.5(kg/10a). Fertilizer application amount is conventional drill sowing seeding(N-P₂O₅-K₂O) 9.0-12-12(kg/10a), and new technology spot seedling and drill sowing seeding were(N-P₂O₅-K₂O) 4.5-12-12(kg/10a) respectively. Fertilizer was applied accordingly. After that, in February, the conventional drill sowing seeding, new technology drill sowing seeding and spot seedling applied 4.0 and 2.2(kg/10a) of nitrogen supplement fertilizer, respectively. Before wintering, plant length was higher in 2022 than in 2021, but leaf number was higher in 2021. Heading time was April 30, 2021 and April 25, 2022. In heading time, plant length was 74 cm in 2021 and 67 cm in 2022, lower than in 2021. On the other hand, There was no difference in the number of panicle and the number of seeds in the 2021 harvester in all treatment plots, and, thus seed yield was no differ. However, the drill sowing seeding and spot seedling of the new technology were somewhat higher than the conventional drill sowing seeding. On the other hand, seed yield was decreased in all treatment plots compared to 2022 because of raifall deficiency in 2021.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.114-121
• /
• 2000

A new concept drill was developed recently (or increasing accuracy and productivity in drilling operation. The burr formation in drilling causes many problems in deburring operation because burrs are formed inside holes and it is difficult to remove them. Burr formations are observed in drilling operation with a new concept drill and are compared with conventional HSS drill. Several workpieces with different materials are drilled with several cutting conditions, velocity and feed rate. The burr in drilling can be classified into three types according to the location of crack. To observe the burr formation mechanism, the cap which is formed with the new concept drill is observed and measured.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.132-140
• /
• 2000

In conventional drilling, burr geometry can be changed according to the variation of drill geometry like point angle, rake angle. Step drilling is proposed to minimize the burr formation in drilling operation. The burr formed in first cutting can be removed in second cutting by the edge in step. The burr formed in second cutting by the edge in step can be minimized according to the change of geometry like, step angle and depth. The mechanism in step drilling is analyzed. Some step drills are applied to drilling the input shaft which is used for vehicle steering. To measure the burr formed in drilling, laser and height gage are used.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.1
• /
• pp.8-13
• /
• 2016

The micro drill bit automatic regrinding in-line system is a system that refurbishes drill bits used in a PCB manufacturing process. This system is able to refurbish drill bits with a minimum size of ø0.15-0.075mm that have previously been discarded. Beyond the conventional manual cleaning process using ultrasound, this system adopts a water jet cleaning system, making it capable of cleaning drill bits with a minimum size of ø0.15-0.075mm. This paper analyses various contact pressures applied to the surface of drill bits depending on the shooting pressure of the cleaning device and fluid velocity in order to optimize the nozzle location and to detect structural instability caused by the contact pressures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.28-33
• /
• 1996

This experiment was carried out at National Crop Experiment Station in 1994 to obtain basic information of growth characters and yield of rice under various seeding methods in direct seeding on dry paddy. Hwaseongbyeo sown on April 27 by flat drill seeding, high ridged drill seeding and hill seeding under different seed conditions, soil convering after seeding and irrigation methods. Nitrogen applied 150kg /ha by 3 times split application at rate of 40:30:30％ (basal: 5th leaf stage:panicle initiation stage). Seedling stands were higher in flushed irrigation water after seeding than in irrigation at 3rd leaf stage, and it also was higher in high ridged drill seedings than in flat drill seedings. Days for seedling stand, heading date were shorten 6~10 days, 2~3 days by flushed irrigation water after seeding, respectively. Number of tiller was more in high ridged drill seedings than conventional seedling method(Flat drill seeding ＋ intact seed ＋ soil covering after seeding ＋ irrigation at 3rd leaf stage after seedling stand) at early growth stage, but the most tiller number was highest in developed seeding method(Flat drill seeding ＋ soaked seed ＋ non soil covering after seeding ＋ fulshed irrigation water after seeding) at heading stage among used seeding methods. Lodging index was slightly high in high ridged drill seeding and conventional seeding. Field lodging was degree 1 in high ridged drill seedings and developed seeding, Milled rice yield in developed seeding was increased 7％ compaired with conventional seeding(5.35t /ha).

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.09a
• /
• pp.199-208
• /
• 1994

This paper presents an evaluation of new drill and blast method with two different drilling directions for pilot tunnel enlargement using numerical experiment and field test. To evaluate the effieiency of new tunnel enlargement method, field tests were performed and compared with conventional drill and blast method. Also, three dimensional transient dynamic analysis was made to investigate the effect of the ground vibration when blasting was performed at same position using the equivalent single hole charge.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.3
• /
• pp.149-155
• /
• 2013

Electric discharging machining (EDM) is commonly adopted to machine the precise and tiny part when it is difficult to meet the productivity and the tolerance by the conventional cutting method. The die-sinking EDM method works well to machine the micro-parts and the perpendicular wall of die and mould, whereas EDM drilling, called super drill, is excellent to machine the deep and narrow hole regardless the material hardness and the hole location. However, the electrode wear is rapid compared to the conventional cutting tool and makes it difficult to control the electrode feeding and to machine precisely. This paper presents an efficient method to estimate the electrode wear using hole pass-through experiment while the stochastic method is used to compensate for the estimation model. To validate the proposed method, the commercial EDM drill machine is used. The experiment result shows that the electrode wear amount can be predicted very precisely.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.298-301
• /
• 1992

A digital image processing approach has been adopted to measure the flank wear area, which is very difficult to measure using conventional techniques. Automatic thresholding of the gray-level values of an image is very useful in automated analysis of image. 1-D entropy thresholding technique is used for image processing and analysis of the flank wear area. This strategy provides more information about drill wear conditions and should therefore have a higher reliability than previous methods. This study calulated quantitatively the flank were area of drill by computer program.