• 한국환경과학회지
• /
• 제7권2호
• /
• pp.233-241
• /
• 1998

This study Is concerned with properties of a thermal convection in a stably stratified Boussinesq fluid caused by partial heating at the lower boundary. For thins purpose, two-dimensional, nonrotating system was employed. U the heating is very strong, convection takes the form of a turbulent plume. Othenuse, remains laminar. If the partial heating at the bottom boundary Is symmetric. the convection takes the form of a trubuient plume. Otherwise remains but beating form Is not so signiacant as to alter the vergence in the lower layer at the center of the partial heating area. The temperature perturbation is characterized by the temperature 'Cross-Over' over the partial heating area. These features are cleared ac- cording to the Increase of temperature difference between the center and side part of the bottom boundary.

• 한국주거학회논문집
• /
• 제12권1호
• /
• pp.85-92
• /
• 2001

The purpose of this study is to investigate the characteristic of the thermal environment at a living room by the heating system(floor radiation heating, forced convection heating, combined heating, radiation convection heating), and to compares the change of the thermal environment after operating the heating with after the operation stopped based on the floor radiation heating. This study proposes the basic data for the design and the development of the thermal storage structure heating system which not only utilizes fully the characteristic of the comfortable thermal environment but also reduces the preheating period and be able to use the off-peak electricity.

• 한국주거학회논문집
• /
• 제10권4호
• /
• pp.111-120
• /
• 1999

The purpose of this study is to evaluate the efficiency of the thermal environment created by the cooling system at the apartment that combines the forced convection cooling(the system reducing humidity from room) with the floor cooling radiation which uses the floor panel from floor heating system, a general residential heating system in Korea. In this study, the combined cooling system in which air supply, spurt temperature difference and interior draft are reduced, is compared with the existing forced convection cooling system. To identify the effect of the comparison concretely, a comparative experiment is carried out on tour conditions, ie, convection cooling, floor radiation convection cooling and floor radiation cooling. Through it the characteristical thermal environment formed within the model room is analyzed, and the conveying system of compressed floor chill and condensation problem are reviewed.

• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.430-435
• /
• 2006

Greenhouse horticulture in South Korea covered about 52,000 ha in 2005. Greenhouse area of about 12,000 ha has been heated during winter season with heating cost of $20{\sim}40%$ of total Production cost. Farmers engaged in greenhouse horticulture were changed into aged people. Therefore the laborsaving of working process and the saving of greenhouse heating cost should be accomplished simultaneously to increase income of greenhouse horticulture. The best method for saving of greenhouse heating cost is to install thermal tunnels into greenhouse. Then hot air heaters using fossil fuel should be changed into hot water heaters. In other words air heating using forced convection should be changed into natural convection system. In this research coil tube made of flexible PE pipe was designed as hot water heat exchanger and its heat exchanging characteristics were analyzed. This new heat exchanger has been adopted as a natural convection system for hot water heating of greenhouse horticulture.

• 대한설비공학회지:설비저널
• /
• 제12권4호
• /
• pp.240-251
• /
• 1983

The municipal government of Daejeon, Korea set up a plan to retrofit solar energy to the existing swimming pool. The pool was constructed in 1980, and meets the requirements of International standard. It will be used for the 1986 Asian Games and the 1988 Seoul Olymipics. The roof structure of the existing pool is to be modified to accomodate trickle solar collectors. In addition, various energy conserving ideas will be applied to the existing building structure. For the prevention of over heating of collectors on the roof, natural air convection scheme will be adopted within the collector system. Natural convection of passive type heating would be also adopted for the space heating of the pool when the system is idle. At present, the pool can be utilized only for two months a year without auxilairy heating. With oil heating, the energy cost would be too high for the normal operation. When this project completed in March 1984, it would be expected to be openable for seven months a year without a significan amount of auxiliary heating. In this project, two dimensional numerical analysis technic have been used to analyse the characterisitics of thermal performance of the swimming pool system. An experimental tat verification of the theoretical analysis have been also attempted.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.37-42
• /
• 2010

본 연구의 목적은 난방공간에서 자연대류 방열기를 통한 방출열량이 방열기의 형상에 따라 어떤 특성을 가지고 있는가 알기 위함이다. 이와 같은 전열특성을 알기 위하여 컴퓨터를 이용한 수치해석방법을 이용하였다. 방열기의 폭이 길고 높이가 낮은 경우 바닥 위 0.5 m에서 2.7 m까지의 온도차는 적음을 알 수 있다. 이는 다른 경우 보다 난방공간에 좋은 열환경 조건을 만들어 주는 것을 보여준다. 장래에 실험적인 방법을 통하여 본 컴퓨터 수치해석 결과의 타당성을 검증하고자 한다.

• Corrosion Science and Technology
• /
• 제18권2호
• /
• pp.55-60
• /
• 2019

Corrosion failure in the convection part of peak load boiler (PLB) of the district heating system led to water leakage. Herein, Internal Rotary Inspection System (IRIS) inspection was employed to examine wall thinning and the cause of leakage in the flue tube. The corrosive products of the turbulator and tube were investigated using scanning electron microscope combined with energy dispersive spectroscopy, X-ray diffraction, and inductively coupled plasma (ICP). Majority of the serious corrosion damage was observed near the turbulator located in the upper flue tube. ICP analysis of the boiler water revealed oxide formation of sodium chloride in the lower end part of the flue tube. A cross-sectional view of the turbulator revealed the presence of double-layers of the oxide film, indicating environmental change during operation associated with water leakage. The outer surface of the turbulator consisted of the acid oxides such as $NO_x$ and $SO_x$ along with sodium and chloride ions. Dew-point corrosion is hypothesized as the main cause for the formation of acid oxides in the region of contact of the flue tube and the turbulator.

• 디지털융복합연구
• /
• 제19권6호
• /
• pp.285-292
• /
• 2021

최근 코로나19 사태로 캠핑 문화가 급속하게 많은 사람들에게 관심을 받고 있다. 많은 캠퍼들이 겨울철 사용하는 대류난방기구는 온도 성층화 문제를 가지고 있다. 이를 해결하기 위해 다양한 동력 서큘레이터가 활용되고 있다. 몇 가지 무동력 서큘레이터도 판매가 되고 있으나, 서큘레이터의 방향이 대류난방기구와 직각으로 디자인되어 있어 실제 공기 순환의 역할을 제대로 하지 못하고 있다. 이러한 문제점을 해결하고자 3D 프린터를 이용하여 대류난방기구의 방향과 같은 무동력 서큘레이터를 디자인하였다. 펠티어소자와, 세라믹페이퍼 등을 이용하여 무동력으로 전기를 만들어 냈으며, HTPLA-CF 필라멘트를 이용하여 열에 강하게 제작하였다. 3D 프린터를 이용하여 원가를 절감할 수 있었으며, 다양한 대류난방기구의 크기에 맞게 제작 할 수 있는 장점이 있다. 본 연구는 효율적인 대류순환을 통해 온도 성층화 문제를 해결할 수 있는 하나의 방법을 제시한다. 또한 3D 프린터를 이용하여 보다 저렴하게 제품을 제작하는 것이 본 연구의 목적이다.

• KIEAE Journal
• /
• 제4권3호
• /
• pp.179-186
• /
• 2004

The evaluation of the indoor environment of the Assembly Hall in the University, which is designed to be a large space, requires efficient design of its heating system that takes into consideration natural convection and the characteristics of the occupant's spaces. Indoor thermal environment was measured in the field and simulated with CFD code. The estimations of temperature distribution and indoor airflow distribution must be carried out simultaneously, as the thermal stratification is induced by natural convection flows. In order to simulate the even distribution of factors affecting the indoor environment, including temperature and airflow, Phoenics is used. The turbulent flow model adopted is the RNG k- model. The inlets and outlets of the air-conditioning systems, material and thermal properties, and the size of the test room ($35m{\times}18m{\times}10m$) are used for the simulation. Since the Assembly Hall is symmetric, half of the space is simulated. A Cartesian grid is used for calculation and the number of grids are respectively $60{\times}45{\times}35$. The results of the computer simulation during winter conditions are compared with the measurements at the typical points in the assembly hall with the heating system. After evaluating the results of the computer simulations, the methods of the heating system and layout are suggested.

• 한국전산유체공학회지
• /
• 제7권1호
• /
• pp.36-43
• /
• 2002

A numerical investigation is made of unsteady double-diffusive convection of a Boussinesq fluid in a rectangular cavity subject to time-periodic thermal excitations. The fluid is initially stratified between the top endwall of low solute concentration and the bottom endwall of high solute concentration. A time-dependent heat flux varying in a square wave fashion, is applied on one sidewall to induce buoyant convection. The influences of the imposed periodicity on double-diffusive convection are examined. A special concern is on the occurrence of resonance that the fluctuations of flow and attendant heat and mass transfers are mostly amplified at certain eigenmodes of the fluid system. Numerical solutions illustrate that resonant convection results in a conspicuous enhancement of time-mean mass transfer rate.