• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5215-5220
• /
• 2013

Recent construction in the field of 3D aversion is increasing interest in automation. This study is results about survey of the coastal landfill using automatic VRS-GPS surveying system. GPS is made with GRXI and SHC250 controller. Automatic surveying system is composed of DPS module, geomagnetism sensor, bluetooth, gimbals, IMU, etc and enables an automatic driving via entered into a route of position. The developed auto surveying system has installed the front and camera for vertical axis and can grasp situation of surveying with smartphone in real time. The comparative result between surveyed result with repetition method auto VRS-GPS surveying system observed surveyed result with VRS-RTK has shown that average error of x-axis is 0.009m, average error of y-axis, 0.010m and average error of height, 0.002m. This possibility was confirmed that field application.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.4
• /
• pp.35-41
• /
• 2014

In this paper, we proposed the implementation of software-based 2D BitBLT engine on the pSOS operating system and the operation of the BitBLT engine on patient monitoring device was verified. To verify the proposed method on the patient monitoring device, we designed prototype PCB board, and verified the operation. We designed the motherboard by using ARM9-based CPU. Because hardware-based BitBLT module was replaced with software-based one, CPU load problem was weighted. To solve this problem, w changed 400Mhz processor instead of 200Mhz processor. We implemented 2D BitBLT kernel module as a device driver which is one of the key elements of a graphics controller GUI in patient monitoring device.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.109-120
• /
• 2017

It is important to estimate objectively in the driving test. Especially, the driving test is examined by totally driving ability, rule observation and situational judgement. For this, a grading automation system for driving test was presented by using GPS, sensor data and equipment operation informations. This system is composed of vehicle mounted module, automatic grading terminal, data controller, data storage and processing server. The vehicle mounted module gathters sensor data in the car. The terminal performs automatic grading using the received sensor data according the driving test criterion. To overcome the misposition of vehicle in the map due to GPS error, we proposed the automatic grading system by map matching method, path deviation and return algorithm. In the experimental results, it was possible to grade automatically, display the right position of the car, and return to the right path under 10 seconds when the vehicle was out of the shadow region of the GPS. This system can be also applied to the driving education.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.25-32
• /
• 2005

PLC is the most widely utilized among many sorts of existing controller for the design of process control system, and study about a PLC language is performed actively. In this paper, we proposed the method that we increase an output points when increased of the output machine which is going to control it in the FA design that used PLC. Output point is going to be extended with 2-3 points in the state that cannot equip output unit in basic base any more. Then an extension base, a power supply, an extension cable and an output unit must be equipped particularly. Then a cost must be added very much. This paper propose the method which extended an output in a small quantity. We designed the expansion unit that received the points of output unit and decoded the signal and the program module that finally extended output points by encoding and decoding, and we confirmed his feasibility through a experiment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.51-56
• /
• 2012

Nowadays, For that reason, the tactical training system that were applied to recruit training center and police training, a real-life survivor game place is a drill using conventional training methods that there is no special training system at open terrain and field, there is no training accomplishment in conformity with battlefield situation portrayal. Therefore, this paper developed the tactical training evaluation system and real-time monitoring system that is compensated the defect and controlled sensing, interlock with PC as wireless a way of GUI using PCB mounted MICOM. This system evaluate drill that regulate sensor control module, tactical training system remotely according to what they should do, is installed to fit the occasion as to be reflected or transmission choosingly and is a 24V H/W drive module.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.40-45
• /
• 2009

In this paper, we introduce a mobile-type tiny sensor device that can classify the activities of daily living based on the state-dependent motion analysis using a 3-axial accelerometer in real-time. The device consists of an accelerometer, GPS module, 32bit micro-controller for sensor data processing and activity classification, and a bluetooth module for wireless data communication. The size of device is 50*47*14(mm) and lasts about 10 hours in operation-mode and 160 hours in stand-by mode. Up to now, the device can recognize three user activities ("Upright", "Running", "Walking") based on the decision tree. This tree is constructed by the pre-learning process to activities of subjects. The accuracy rate of recognizing activities is over 90% for various subjects.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.95-102
• /
• 2017

Modular toys for creative education require functional blocks to create various types of movements. An active drive module and a lot of passive connection blocks are needed to express motion with combination. In this paper, we propose the design of modular toys to produce various creative movements and controller structure working with them. In order to facilitate the connection between the designed modules, a connection method and a suitable mechanism are suggested. We also dealt with the design of various types of sensor modules that can work in conjunction with modular toys. Using these toys, typical standard application form that can be imitated educationally is suggested and showed the usefulness of the modular toy by actually applying it with designed modules and components. The proposed method is applied to actual educational toys, and the operation is effectively performed by recording operation and playing repetitive operation.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.503-508
• /
• 2019

In recent years, among the IoT products that are used in various ways in everyday life, motorized products are increasing. This study aims to develop a microcontroller unit that can easily control multiple motors and develop an application that makes use of this microcontroller unit. The basis of the hardware developed by the research was the Arduino board, and to it, the Bluetooth module, Zigbee module, and a motor driver were connected. To control the device, an application was designed. The final microcontroller unit and its application may be applied to electric curtains, electric blinds, robots, and other various IoT products. Further research will lead to hardware development that can control various types of motors other than stepping motors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.109-119
• /
• 2013

This paper presents the design of the Safety Programmable Logic Controller (SPLC) used in the Nuclear Power Plants, an analysis of a reliability for the SPLC using a markov model. The architecture of the SPLC is designed to have the multiple modular redundancy composed of the Dual Modular Redundancy(DMR) and the Triple Modular Redundancy(TMR). The operating system of the SPLC is designed to have the non-preemptive state based scheduler and the supervisory task managing the sequential scheduling, timing of tasks, diagnostic and security. The data communication of the SPLC is designed to have the deterministic state based protocol, and is designed to satisfy the effective transmission capacity of 20Mbps. Using Markov model, the reliability of SPLC is analyzed, and assessed. To have the reasonable reliability such as the mean time to failure (MTTF) more than 10,000 hours, the failure rate of each SPLC module should be less than $2{\times}10^{-5}$/hour. When the fault coverage factor (FCF) is increased by 0.1, the MTTF is improved by about 4 months, thus to enhance the MTTF effectively, it is needed that the diagnostic ability of each SPLC module should be strengthened. Also as the result of comparison the SPLC and the existing safety grade PLCs, the reliability and MTTF of SPLC is up to 1.6-times and up to 22,000 hours better than the existing PLCs.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1257-1259
• /
• 1996

In this paper, we introduce an integrated communication and control system(ICCS) for control of a crane. The system is integrated with a compasite technique as a network interfacing, a user interfacing and a system control for continuous process like as a container crane. The field-bus(Profibus) network module is used to interconnect each input/output module with main control unit. The MMI system for user interfacing is integrated with an ODBC-based data management tool and IECl131-based control logic design tool(Soft-Logic Designer:SLD). The each programmed control task in the main Controller is executed using a petri-net based scheduler.