• Journal of Pharmaceutical Investigation
• /
• v.41 no.4
• /
• pp.217-225
• /
• 2011

The aim of this work was to prepare porous osmotic pump tablets for controlled delivery of Aceclofenac. Aceclofenac solid dispersion was prepared to improve the solubility by using the drug - carrier (Mannitol) ratio of 1:1. The osmotic pump tablets were prepared using the solid dispersed product of Aceclofenac. The formulation contains potassium chloride as osmotic agent, cellulose acetate as semipermeable membrane, poly ethylene glycol (PEG 4000) as pore former and sodium lauryl sulphate (SLS) as solubility enhancer. The formulations were designed by the general factors such as osmotic agent and pore former. All formulations were evaluated for various physical parameters and, the in vitro release studies were conducted as per USP. The drug release kinetic studies such as zero order, first order, and Higuchi and Korsmeyer peppas were determined and compared. All the formulations gave more controlled release compared to the marketed tablet studied. Numerical optimization techniques were applied to found out the best formulation by considering the parameter of in vitro drug release kinetics and dissolution profile standards. It was concluded that the porous osmotic pump tablets (F7) composed of Aceclofenac solid dispersion/Potassium chloride/Lactose/Sodium lauryl sulphate/Magnesium Stearate (400/40/95/10/5, mg/tab) and coating composition with Cellulose acetate/ PEG 4000 (60/40 %w/w) is the most satisfactory formulation. The porous osmotic pump tablets provide prolonged, controlled, and gastrointestinal environment-independent drug release.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.119-124
• /
• 1996

To develop oral controlled release dosage forms, ionic interactions between polymers and drugs were evaluated. Hydroxypropylmethyl cellulose and carboxymethylene were used as model nonionic and ionic polymers, respectively. 5-fluorouracil, propranolol-HCl and sodium salicylate were selected as model nonionic, cationic and anionic, respectively. Polymer-drug mixtures were compressed into tablets and drug release kinetics from these tablets were determined. Drug release from the tablets made of the nonionic polymer was not affected by the charge of drugs, rather, was regulated by the solubility of drugs in different pH releasing media. However, drug release kinetics were significantly affected when drug-polymer ionic interactions exist. Enhanced drug release was observed from anionic drug-anionic polymer tablets due to ionic repulsion, whereas drug release was retarded in cationic drug-anionic polymer tablets owing to ionic attractive force. Therefore, the results suggested that the polymer-drug interactions are important factors in designing controlled release dosage forms.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.2
• /
• pp.87-92
• /
• 1998

Kojic acid (KA) is an antimelanogenic agent which has been widely used in cosmetics to whiten the skin color. However, it has the drawbacks of the skin irritancy and the instability against the pH, temperature, and light. In order to overcome these problems, various topical gels and multiple emulsion creams which can control the release of active ingredient, KA, were formulated employing cream bases of mineral oil with caprylic capric triglyceride and hydrophilic polymers such as chitosan, carbopol. and pluronics. Using Franz diffusion cells mounted with a synthetic cellulose membrane (MWCO 12,000), drug release characteristics of the formulations were evaluated by the HPLC assay of KA concentration in the receptor compartment of pH 7.4 phosphate buffered saline solution. Drug release from chitosan-based gels (ChitoGel) obeyed to the first order kinetics with a rapid release especially in the initial period. However, pluronic-based gels (PluGel) and carbopol-based gels (CarboGel) revealed controlled release of drug to some extent, followed by the square root-time kinetics. Moreover, the release of KA was further controlled with the W/O/W multiple emulsion creams (MultiCream), showing the apparent zero order release kinetics by virtue of dynamic ratecontrolling membrane of the oil layer. The flux $(J,\;{\mu}g/cm^2/hr)$ of ChitoGel. CarboGel. PluGel. and MultiCream in the initial period of 6hr were 73.30, 28.67. 24.04 and 7.72, respectively. On the other hand, the skin irritancy score of ChitoGel and MultiCream were observed as 2.5 and 2.3 respectively, in the rabbit skin irritation test. Although there were insignificant differences at p<0.05 between those formulations, it was possible to conclude that the W/O/W multiple emulsion creams containing KA might be a good candidate for an antimelanogenic drug delivery system due to the controlled release of acidic drug molecules.

• Journal of Food Hygiene and Safety
• /
• v.37 no.2
• /
• pp.114-120
• /
• 2022

In this study, a comparative dissolution experiment was conducted between an immediate-release and a controlled-release vitamin C tablet applied with a technology to control the dissolution of vitamin C to maintain the vitamin C level in the human body. In order to confirm the dissolution rate (%) of vitamin C tablets, HPLC determination was conducted based on the dissolution test methods in the 'Korean Pharmacopoeia (No. 2020-88),' 'Guidelines on Specifications of Dissolution Tests for Oral dosage Forms,' and 'Standard and Specifications for Health Functional Foods (No. 2020-63)' from Ministry of Food and Drug Safety (MFDS). In addition, the dissolution pattern between the immediate-release tablet and the controlled-release tablet was comparatively analyzed. The analysis result confirmed that the immediate-release vitamin C tablet was 100% dissolved after 45 minutes, while the controlled-release vitamin C tablet was 100% dissolved after 480 minutes (8 hours). Furthermore, the dissolution rate (%) at 60 minutes was slower than that of the immediate-release vitamin C tablet. Based on these results, this study confirmed that the dissolution rate (%) test and development of controlled-release tablets containing vitamin C as the main component a re possible.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.3
• /
• pp.177-183
• /
• 1998

Low toxicity, reverse thermal gelation and high drug loading capabilities suggest that poloxamer 407 gels have great potential as a topical drug delivery system. Kojic acid (KA) is an antimelanogenic agent which has been widely used in cosmetics to whiten the skin color. However, it has the drawbacks of skin irritancy due to its acidic pH. Poloxamer gels of different polymer contents were formulated to overcome the problem and compared to the cream type formulations of either w/o/w multiple emulsion cream or o/w type emulsion cream. Using Franz diffusion cells mounted with a synthetic cellulose membrane (MWCO 12,000), drug release characteristics of the formulations were evaluated by the HPLC assay of KA concentration in the receptor compartment of pH 7.4 phosphate buffered saline solutions. Drug release from w/o/w multiple emulsion cream was controlled by oil membrane, showing the apparent zero order release kinetics. The KA release from the poloxamer gels was also controlled by the gel matrix, showing that drug release increased linearly as KA contents increase, but decreased exponentially as the polymer contents increase. In the skin irritancy test, the primary irritancy index(PII) of poloxamer gel base was lower than those of multiple emulsion cream base and o/w cream. Depending on KA contents or polymer contents in the gel. PH values in poloxamer gels were ranged from 1.3 to 2.0, which are interpreted as low or negligible irritation on skin. There was a good correlation between the log value of flux in drug release and PII value in skin irritation. It was possible to conclude that the poloxamer gels containing KA might be a good candidate for an antimelanogenic topical delivery system by virtue of the controlled release of the drug and the reduced skin irritancy.

• Archives of Pharmacal Research
• /
• v.9 no.4
• /
• pp.193-199
• /
• 1986

The release of heparin from monolithic devices composed of different ratios of polythylene oxide (PEO MW 20,000) and hydrophobic polydimethylsiloxane or polyurethane was investigated. Water soluble PEO blended into the polymers provided a controlled release of heparin. The release rate of heparin could be controlled by varying the content of PEO. The heparin release rate from the devices increased as the content of PEO in the devices increased. The release mechanism may be associated with the creation of pore of domain through the devices following the swelling and the change in the physical structure of the polymer network. Hydrophobic polydimethylsiloxanes and polyurethanes containing PEO can provide an antith rombogenic material for prologed release of heparin from blended system.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.2
• /
• pp.95-99
• /
• 2007

To develop topical nitroglycerin (NTG) preparation far chronic anal fissure treatment, the release rate of NTG should be controlled carefully. For this, microemulsion was prepared from the phase diagram construction with Cremophor ELP, ethanol and Labrafil $M1944CS^{(R)}$ and the topical gel was prepared by dispersing NTG containing microemulsion into hydrophilic polymers. in viかo release characteristics were evaluated with Franz diffusion cell using cellulose membrane and compared with control hydrogels. The release rate of NTG was followed $1^{st}$ order kinetics and, when comparing the NTG release from control hydrogel with that from the microemulsion-based hydrogel, the NTG release rate was controlled by the content of polymers within continuous phase and the concentration of dispersed phase.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.429-433
• /
• 2008

Alginate/carboxymethyl scleroglucan (CMSG) hydrogels were suggested as a novel carrier for the controlled release of protein drugs. The drug release characteristics of alginate hydrogels were improved by CMSG addition. Scleroglucan (Sclg) was carboxymethylated using monochloroacetic acid in aqueous alkaline medium. Alginate/CMSG hydrogels were prepared by dropping the mixture solution of alginate/CMSG into calcium chloride solution. The swelling behaviors and drug release characteristics of the hydrogels were investigated in the buffers of pH 1.2 or 7.4. As the CMSG content increased in the hydrogels, the swelling ratio of the alginate/CMSG hydrogel increased rapidly in the buffer of pH 7.4. At pH 1.2, however, the swelling ratio significantly decreased compared to that at pH 7.4. According to in vitro release tests, only 15% of ovalbumin, investigated as a model protein drug, was released from the alginate/CMSG hydrogels at pH 1.2 within 6 h. At pH 7.4, however, the drug release significantly increased due to the rapid swelling of the hydrogels. The release and swelling behaviors of the hydrogels could be controlled by changing the CMSG content in the hydrogels. These results supported the use of alginate/CMSG hydrogels as a suitable carrier for the controlled release of protein drugs in a pH responsive manner.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.4
• /
• pp.185-190
• /
• 1989

The release of angiotensin and ${\alpha}-amylase$ from monolithic devices of different molecular weight of polyethylene glycol (PEC) grafted polyurethane copolymer was investigated. Water-soluble PEG grafted polymer provided a controlled release of angiotensin and ${\alpha}-amylase$. The release rate of angiotensin and ${\alpha}-amylase$ could be controlled by varying the molecular weight of PEC grafted. The release mechanism may be associated with the creation of pore or domain through the devices following the gel swelling and self-aggregation by PEC grafted polymer. Hydrophobic polyurethane grafted with PEG can provide a biomaterial for prolonged release of angiotensin and ${\alpha}-amylase$ from angiotensin and ${\alpha}-amylase$ blended system.

• YAKHAK HOEJI
• /
• v.29 no.2
• /
• pp.70-75
• /
• 1985

The influence of polyethylene glycol derivatives on heparin release from cylindrical monolithic type silicone segment devices was examined in physical saline solution. This water-soluble carrier caused the devices to absorb the water in aqueous media. The release rate of heparin from the devices was increased as molecular weight of polyethylene glycol was increased. Water soluble carrier incorporated into silitone segment devices permits controlled release of heparin that otherwise would be released extremly slowly from the polymer. Heparin released from the silicone segment containing polyethylene glycol showed the first-order kinetics. Without changing the release-pattern, the release rate of heparin could be controlled by varing molecular weight of polyethylene glycol, the water-soluble carrier and depleting polyethylene glycol on the outlayer of devices. The mechanism of release probably showed the creation of pore or microdomine through the devices secondary to the swelling.