• Bulletin of the Korean Chemical Society
• /
• 제23권9호
• /
• pp.1337-1339
• /
• 2002

• 동아시아식생활학회지
• /
• 제22권1호
• /
• pp.88-94
• /
• 2012

Histamine은 발효식품, 등푸른 생선 등 단백질이 많이 함유된 식품에서 잘 생성되는 물질로 이들 식품의 부패 시에는 다량의 histamine이 발생되어 이를 섭취하였을 때 독성을 일으킬 수 있기 때문에 histamine은 어육식품의 선도 저하 또는 부패의 지표로서 사용된다. 따라서 본 연구에서는 신속하며 정확한 histamine 검출을 위한 바이오센서 시스템을 구축하기 위하여 기능화된 MWCNT와 Prussian blue를 사용한 전극을 제작하였으며, 여러 불용성 담체에 효소를 고정화시켜 바이오센서 시스템에 적합한 불용성 담체를 확인하기 위한 연구를 수행하였다. MWCNT-$NH_2$와 Prussian blue가 도입된 전극의 과산화수소에 대한 감응도를 확인한 결과, 검출한계는 $0.1{\mu}M$으로 나타났으며, 각 담체의 효소 고정화도를 측정한 결과, CNBr-activated sepharose 4B는 48.5%, calcium alginate는 40.3%, controlled pore size glass beads는 51.0%를 보였다. 또한 CNBr-activated sepharose 4B, calcium alginate, controlled pore size glass beads로 제작된 효소반응기의 $100{\mu}M$ histamine에 대한 전극 감응도는 각각 120 nA, 110 nA, 140 nA로 나타났다. 따라서 담체의 coupling efficiency, 제작된 효소반응기의 전극 감응도, 선형 관계 등을 고려해 보았을 때 controlled pore size glass beads가 본 연구에서 구축된 바이오센서 시스템에서 가장 적합한 담체인 것으로 확인되었다. 이로써 이들 작업전극과 효소반응기로 구축된 바이오센서는 histamine을 감도 높고 신속하게 측정할 수 있는 것으로 나타났다.

• Journal of Pharmaceutical Investigation
• /
• 제27권1호
• /
• pp.39-49
• /
• 1997

Nicotinic acid was mixed with glass powders such as controlled pore glass (CPG), glyceryl controlled pore glass (GPG) and glass beads (GB) at room temperature. The physicochemical properties of nicotinic acid in the various mixtures were examined by differential thermal analysis, X-ray diffraction study. Infrared spectroscopy and BET gas adsorption measurements. The peak area at the melting point from the various mixtures of nicotinic acid and CPG was increased with an increase of nicotinic acid concentration while the broad peak area was remained unchanged in the DTA curve. As shown in the powder X-ray diffraction patterns, the crystalline peaks of nicotinic acid disappeared in mixture with CPG, suggesting the interaction of nicotinic acid and porous powders. It was found that the larger the content of CPG, the higher the ratio of an amorphous state to a crystalline state. BET isotherm showed that as the amount of nicotinic acid was increased, the specific surface area was reduced proportionally to nicotinic acid content of up to 40% and remained constant thereafter. Sublimation of nicotinic acid from the mixture of nicotinic acid and CPG was examined. A large quantity of nicotinic acid was retained in the mixture when stored on various temperatures in vacuo for 10 hours. The nicotinic acid mixtures with CPG or GPG showed a high dissolution rates of nicotinic acid in aqueous solution, especially in the initial dissolution stage. CPG is expected to be a good pharmaceutical excipient to reduce the crystallinity of drugs and to prevent sublimation of drugs.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1366-1370
• /
• 2004

Controlled pore glass bead was modified with bovine serum albumin (BSA), and glutathione (GSH) was immobilized through three kinds of linkers on top of BSA. Bis(3-sulfo-N-hydroxysuccinimide suberate) sodium salt $(BS^3)$, N-hydroxysuccinimide 3-(2-pyridyldithio)propionate (SPDP), or N-hydroxysuccinimide 4-maleimidobutyrate (GMBS) was introduced into the BSA-bound matrix. Subsequently, GSH was immobilized by addition of thiol side chain into the maleimido moiety, replacing a disulfide group, or formation of an amide group upon releasing 3-sulfo-N-hydroxysuccimide group. It was observed that conjugation methodology played a critical role for activity of the immobilized GSH. SDS-PAGE chromatogram showed that the matrix of glutathione immobilized on BSA through GMBS manifested high selectivity towards glutathione-S-transferase (GST) in cell lysate.

• 한국세라믹학회지
• /
• 제43권5호
• /
• pp.277-283
• /
• 2006

A porous material with a surface layer was fabricated from glass abrasive sludge and expanding agents. The glass abrasive sludges were mixed with expanding agents and compacted into precursors. These precursors were sintered in the range of $700-900^{\circ}C$ for 20 min. The sintered porous materials had a surface layer with smaller pores and inner parts with larger pores. The surface layer and closed pores controlled water absorption. As the expanding agent fraction and the sintering temperature increased, the porosity and pore size increased. The porous materials with $Fe_2O_3$ and graphite as the expanding agents had a low absorption ratio of about 3% or lower while the porous material with $CaCO_3$ as the expanding agent had a higher absorption ratio and more open pores.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.533-536
• /
• 2006

A light-weight aggregate with a surface layer was fabricated using glass abrasive sludge and expanding agents. The glass abrasive sludges were mixed with expanding agents ($Fe_2O_3,\;graphite,\;CaCO_3$) and formed into precursors. These precursors were sintered in the range of $700-900^{\circ}C$ for 20min. The sintered light-weight aggregate had a surface layer with smaller pores and an inner region with larger pores. The surface layer and pores controlled the water absorption ratio and physical properties. As the expanding agent fraction and the sintering temperature increased, the porosity and pore size increased. The light-weight aggregate with $Fe_2O_3$ and graphite as the expanding agents had a low water absorption ratio while the porous material with $CaCO_3$ as the expanding agent had a higher water absorption ratio and more open pores.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.336-339
• /
• 2018

A unique porous material with controlled pore characteristics can be fabricated by the freeze-drying process, which uses the slurry of organic material as the sublimable vehicle mixed with powders. The essential feature in this process is that during the solidification of the slurry, the dendrites of the organic material should repel the dispersed particles into the interdendritic region. In the present work, a model experiment is attempted using some transparent organic materials mixed with glass powders, which enable in-situ observation. The organic materials used are camphor-naphthalene mixture (hypo- and hypereutectic composition), salol, camphene, and pivalic acid. Among these materials, the constituent phases in camphor-naphthalene system, i.e. naphthalene plate, camphor dendrite, and camphor-naphthalene eutectic exclusively repel the glass powders. This result suggests that the control of organic material composition in the binary system is useful for producing a porous body with the required pore structure.

• 지구물리와물리탐사
• /
• 제7권2호
• /
• pp.130-135
• /
• 2004

본 논문은 지반의 물성과 전기비저항의 관계를 밝히기 위하여 실내에서 여러 종류의 흙과 암석 시료를 대상으로 농도가 다른 9종류의 NaCl 용액으로 공극을 포화시킨 후 전기비저항을 측정하고, 그 결과로부터 흙과 암석의 전기비저항을 좌우하는 물성요인과 이들 요인이 전기비저항에 미치는 영향에 대해서 기존의 경험식을 토대로 비교 검토하였다. 그 결과에 의하면 흙과 암석 시료의 종류에 관계없이 공극수의 전기비저항이 높아짐에 따라 시료의 전기비저항은 높아지고 있으나, 그 증가 폭은 작아지는 경향을 보였다. 이러한 이유는 공극수의 전기비저항이 10 ohm-m 이하의 영역에서는 시료의 전기비저항이 공극수의 전기비저항에 의해서 좌우되지만, 그 이상의 영역에서는 공극수의 전기비저항과 구성물질의 전도성에 영향을 받고 있기 때문으로 생각된다. 또한 glass beads와 세립분의 함량이 $5\%$ 이하인 흙 시료의 전기비저항 실측치는 Archie의 경험식으로부터 구한 계산치와 잘 일치하고 있으나, 그 외 세립분을 $20\%$ 이상 함유하고 있는 흙과 암석 시료의 전기비저항 실측치는 Patnode and Wyllie의 경험식으로 구한 계산치와 거의 일치하고 있었다. 이러한 결과로부터 일반적인 지하수의 전기비저항 영역($20\~200ohm-m$)에서 지반의 전기비저항은 간극수의 전기비저항과 구성물질의 전기전도성을 고려한 병렬 저항 회로 모델을 적용하는 것이 타당한 것으로 밝혀졌다.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.145-148
• /
• 2012

Spherical silica aerogel powders were fabricated via an emulsion polymerization method from a water glass. A water-in-oil emulsion, in which droplets of a silicic acid solution are emulsified with span 80 (surfactant) in n-hexane, was produced by a high power homogenizer. After gelation, the surface of the spherical silica hydrogels was modified using a TMCS (trimethylchlorosilane)/n-hexane solution followed by solvent exchange from water to n-hexane. Hydrophobic silica wet gel droplets were dried at 80 ℃ under ambient pressure. A perfect spherical silica aerogel powder between1 to 12 ㎛ in diameter was obtained and its size can be controlled by mixing speed. The tapping density, pore volume, and BET surface area of the silica aerogel powder were approximately 0.08 g·cm-3, 3.5 ㎤·g-1 and 742 ㎡·g-1, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.7.1-7.1
• /
• 2011

Nanoporous templates have been widely used for the development of new functional nanostructured materials suitable for electronics, optics, magnetism, and energy storage materials. We have prepared nanoporous templates by using thin films of mixtures of polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) and PMMA homopolymers. These templates have cylindrical nanoholes spanning the entire thickness of the film. Some applications of nanoporous templates are introduced: a) anti-reflective coating, b) the preparation of conducting polymer nanowires of poly (pyrrole), poly (3,4-ethylenedioxy-thiopene) onto a glass coated with indium-tin-oxide, and c) the separation membranes for biomaterials. We found that when the pore fraction of nanoholes in the film was ~0.68, almost zero reflectance at a specific wavelength, which can be changed with film thickness, was achieved at visible wavelengths Furthermore, ultra high density array of conducting nanowires was successfully prepared onto various substrates including flexible polymer. Due to highly alignment of polymer chain along the nanowire direction, the conductivity was much increased. Furthermore, these nanoporous films were found to be very effective for the separation of human Rhinovirus type 14 (HRV 14), major pathogen of a common cold in humans, from the buffer solution. We also found that when the pore size was effectively controlled down to 6 nm, a single file diffusion was observed.