• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.61-65
• /
• 2013

Modified atmosphere (MA) of reduced $O_2$ and elevated $CO_2$ concentrations has been used for keeping the quality of fresh produce and extending the shelf life. As a way to attain the beneficial MA package around the produce, a gas diffusion tube or perforation can be attached onto the container and controlled on real time in its opening/closing responding to $O_2$ and $CO_2$ concentrations measured by gas sensors. The timely-controlled opening of the gas diffusion tube can work in harmony with the produce respiration and help to create the desired MA. By use of the mathematical modeling, the effect of tube dimension on the controlled container atmosphere was figured out in this study. Spinach and king oyster mushroom were used as typical commodities for designing the model container system (0.35 and 0.9 kg in 13 L, respectively) because of their respiration characteristics and the optimal MA condition ($O_2$ 7~10%/$CO_2$ 5~10% for spinach; $O_2$ 2~5%/$CO_2$ 10~15% for mushroom). With a control logic for the gas composition to stay as close as possible to optimum MA window without invading injurious low $O_2$ and/or high $CO_2$ concentrations, the atmosphere of the sensor-controlled container could stay at its lower $O_2$ boundary or upper $CO_2$ limit under certain tube dimensional conditions. There were found to be the ranges of the tube diameter and length allowing the beneficial MA. The desired range of the tube dimension for spinach consisted of combinations of larger diameter and shorter length in the window of 0.3~2 cm diameter and 0.2~10 cm length. Similarly, that for king oyster mushroom was combinations of larger diameter and shorter length in the window of 0.9~2 cm diameter and 0.2~3 cm in length. Clear picture on generally affordable tube dimension range may be formulated by further study on a wide variety of commodity and pack conditions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.240-249
• /
• 2007

Statement of problem: A phenomenon of screw-loosening in implant abutment is frequently occurred in a single and multiple implant restoration. Purpose: This study was performed to evaluate an effect of abutment material on screw-loosening before and after a cyclic loading. In a single-tooth implant, different materials of abutment, Type III Gold alloy and Zirconium composite$(ZrO_2/Al_2O_3)$ were used. Material and method: The Gold alloy(Type III) and Zirconium composite$(ZrO_2/Al_2O_3)$ were used to make a superstructure of implant, the one of types of UCLA, Each group was constituted of 5 sample with a 30-degree offset angulated loading platform. The external hexagonal fixture was rigidly hel d in a special holding zig to ensure solid fixation without rotation during the tightening and a cyclic loading. A Titanium-alloy screw was used to connect and controlled to be tighten in 20Ncm torque by a digital torque gauge. A 20 times of consecutive closing/opening cycle were performed to evaluate the immediate torque loss. In 5 sample of each material group, an initial opening torque was recorded during 3 closing/opening cycle, then 2Hz, 200N, 1,000,000 cyclic loadings were performed, then a opening torque was evaluated. Result & Conclusion: 1. In this limited study, titanium alloy screw tightened in 20Ncm, a cold-welding phenomen on was not observed during the 20 times of closing/opening cycle(p=0.11, p=0.18). 2. In titanium alloy abutment screw, repeated opening and closing of the screw caused to progressive decrease of opening torque(p=0.014). 3. The difference in preload of screw between gold alloy abutment and ceramic$(ZrO_2/Al_2O_3)$ abutment was not significant(p=0.78). 4. The difference in torque loss of screw between gold alloy abutment and ceramic$(ZrO_2/Al_2O_3)$ abutment was not significant after 2Hz,200N, 1,000,000 cyclic loading(p=0.92). 5. In titanium alloy abutment screw tightened by 20Ncm, the screw loosening was not significant on each group after 2Hz, 200Ncm, 1,000,000 cyclic loading(p=0.59).

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.30-33
• /
• 2013

The studies of superconducting fault current limiter (SFCL) for reduction of the fault current are actively underway in the worldwide. In this paper, we analyzed the characteristics of a new type SFCL using the conventional transformer and superconducting elements combined mutually. The secondary and third windings of this SFCL were connected the load and the superconducting element, respectively. The electric power was provided to load connected to secondary windings of the transformer in normal state of power system. On the other hand, when the fault occurred in power system, the fault current was limited by closing the line of third winding of the transformer. At this time, the ripple phenomenon of the fault was minimized by opening the fault line in secondary winding of a transformer in power system. The sensing of the fault state was performed by the CT(current transformer) and then turn-on and turn-off switching behavior of the SFCL was performed by the SCR(silicon-controlled rectifier). As a result, the proposed SFCL limited the fault current within a half-cycle efficiently. We confirmed that the fault current limitation rate was changed according to the winding ratio of a transformer.

• Management & Information Systems Review
• /
• v.8
• /
• pp.167-186
• /
• 2002

Since first introduced on July 1974, consolidated financial statements had been concluded or not depending on decision-makings by companies. But the Securities and Exchange Law as revised on April 1992 specified that any listed corporation must add consolidated financial statements and their auditor's opinion to its business report. foreign-based corporations became subject to the conclusion of the sheets and equity method from the time of business closing on Dec. 1995. Now all of domestic and foreign-based corporations, whether they are controlling or controlled businesses, are subject to consolidated financial statements. Business bankruptcies and restructuring under the economic crisis since the late 1997 raised the necessity of the increased reliability and transparency of consolidated accounting information and significantly changed contents of consolidated audit report. An analysis over the past three years shows that auditor's opinions about consolidated financial sheets are mostly qualified opinions whose proportion is being gradually decreased, while rejected opinions are annually increasing in proportion. When compared to the year of 1998, the numbers of those controlled businesses, and companies under the equity method were all decreased, but rather increased when determined on the basis of such numbers per a corporation. This suggests that corporations are promoting business diversification through business separation and share acquisition and advancing into foreign markets as well as domestic ones. Especially, special contents included in consolidated auditing report show a tendency to increase annually. Based on all these findings, the strengthening of accounting regulation will lead to providing more reliable information related to auditor's opinion about consolidated financial statements and raising the information effectiveness and validity of the statements as publicly notified.

• The Journal of Korea Robotics Society
• /
• v.3 no.3
• /
• pp.165-175
• /
• 2008

For an advanced intelligent service, the need of HRI technology has recently been increasing and the technology has been also improved. However, HRI components have been evaluated under stable and controlled laboratory environments and there are no evaluation results of performance in real environments. Therefore, robot service providers and users have not been getting sufficient information on the level of current HRI technology. In this paper, we provide the evaluation results of the performance of the HRI components on the robot platforms providing actual services in pilot service sites. For the evaluation, we select face detection component, speaker gender classification component and sound localization component as representative HRI components closing to the commercialization. The goal of this paper is to provide valuable information and reference performance on appling the HRI components to real robot environments.

• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.2
• /
• pp.139-143
• /
• 1994

This study was carried out to control the stalk curing period in Burley Tobacco, for its period was longer than 40 days. The 5 methods were treated to shorten the stalk curing period. The curing period was shortened for 1~3 days by the harvesting methods and the amount of predehydration, but it was shortened for 8 days by the hanging methods(sloping and horizontal curing)and the hanging density(90 plants/3.3m2) without the decrease of quality. In the ventilating condition of the curing house, the curing period could be controlled for 5 dyes with the quality like the conventional cured leaves by closing the curing house from the late curing stage. But when the curing house was not ventilated earlier, however the curing period was shortened but its quality was decreased.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.132-137
• /
• 2008

A failure analysis of ammonia converter which suffered hydrogen attack in two years since its initial operating time was presented. It is constructed from 2.25 Cr.1 Mo steel. Analysis showed that the failure on closing seam weld joint was due to local improper post weld heat treatment (PWHT). Improper PWHT can introduce high residual stresses in thick-walled pressure vessel. High residual stress level in weld joint is very prone to hydrogen attack for any components which are operating in hydrogen gas environment. The repair procedures based on the principle to decrease the residual stress then proposed. The repair was controlled very carefully by applying several nondestructive tests in the each stage of repair. To assure the successful of the proposed repair, after one year since repair time, high temperature ultrasonic and TOFD methods were applied on-stream to this equipment in order to evaluate its post repair condition. The two methods showed good results on the repaired area.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1697-1702
• /
• 2004

The waterhammer has recently become more important because the pumping stations were big and the systems conveying the fluid through the large and long transmission pipelines were complex. When the pumps are started or stopped for the operation or tripped due to the power failure. the hydraulic transients occur as a result of the sudden change in velocity. In this paper, the field tests on the waterhammer by the startup, stoppage, and power failure of a centrifugal pump were carried out for Yongma transmission pumping station in Seoul. The experimental results were compared with that of the numerical calculations. in which results the procedure of controlled pump normal shut-down and the two-step closing mode of controlling the ball valve for pump emergency stop are proposed to reduce the pressure surge.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1520-1524
• /
• 2005

This paper describes the racemic and stereoselective synthetic route for a novel 4'$\alpha$-phenyl and 6'$\alpha$-methyl doubly branched carbocyclic nucleosides from an acyclic 2-hydroxy acetophenone. The installation of phenyl group at the 4'-position of carbocyclic nucleoside was successfully accomplished via a sequential [3,3]-sigmatropic rearrangement. The stereoselective introduction of a methyl group in the 6'$\alpha$-position was accomplished by Felkin-Anh controlled alkylation. Bis-vinyl 11 compound was successfully cyclized using a Grubbs’ catalyst II to desired carbocycles. The natural bases (adenine and cytosine) were efficiently coupled using a Pd(0) catalyst. Although all the synthesized compounds were examined for their activity against several viruses such as HIV-1, HSV-1, HSV-2 and HCMV, only cytosine analogues 17 exhibited weak antiviral activity against HCMV.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.4
• /
• pp.231-236
• /
• 2004

A normally open thermopneumaticc-actuated microvalve has been fabricated and their properties are investigated. The advantages of the proposed microvalve are of the low cost fabrication process and the transparent optical property using polydimethylsiloxane (PDMS) and indium tin oxide (ITO) glass. The fabricated microvalves with in-channel configuration are easily integrated with other microfluidic devices on the same substrate. The fabrication process of thermopneumatic-actuated microvalvesusing PDMS is very simple and its performance is very suitable for a disposable lab-on-a-chip. The PDMS membrane deflection increases and the flow rates of the microchannel with microvalvels decrease as the applied power to the ITO heater increases. The powers at flow-off are dependent on the membrane thickness and the applied inlet pressure but are independent of the channel width of microvalves. The flow rate is well controlled by the switching function of ITO heater and the closing/opening times are around 20 sec and 25 sec, respectively.