• 대한음성학회지:말소리
• /
• 제15_18호
• /
• pp.19-34
• /
• 1989

There is general agreement that voice onset time (VOT) is functionally related with the glottal opening at the moment of the oral release of a stop. However, systematic investigations of tempo 8n4 the place of articulation as affecting the glottal opening and VOT have relatively neglected. Various instrumental techniques were used to verify the claim with BrEng and korean speakers, under controlled experimental conditions, tempo being one of them. It was found that voiceless aspiration (i.e. VOT) is not simply a function of the glottal area at the moment of the oral release of a stop as it is normally defined in the existing literature. Within a given place of articulation and across temper VOT was generally insignificantly related to the glottal area. It is inferred that the glottal adduction onset time for the following vowel is actively control led by the speaker to meet aerodynamic requirements in relation to class (i.e. aspirated and unaspirated) and tempo. Some possible underlying physiological mechanisms for various phonetic aspects of intervocalic stops, associated with the glottal area and VOT, were discussed.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1357-1360
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.505-508
• /
• 1995

This paper suggests new hydraulic circuit to control the pressure of clutches and brakes which has several advantages than conventional hydraulic circuit in automatic transmissions. In conventional hydraulic circuit, the pressures of all friction elements are controlled by only one pressure control valve and accumlators. So, controllable range is limited and it is unable to control the friction elements independently. Therefore, we can not do the fine control of timing between apply clutch and release clutch which is needed in clutch-to clutch shifting automatic transmissions. To overcome these faults, we designed the direct-acting hydraulic circuit where one pressure control valve and pressure control solenoid valve are allocated to each friction element and control that independently. Through this structural improvement of hydraulic circuit, we can achieve elaborate aontrol to clutch pressure. Specially, We can control the timing between apply clutch and release clutch delicately which is needed in clutch-to-clutch shifting.

• 약학회지
• /
• 제44권3호
• /
• pp.251-256
• /
• 2000

Sterically stabilized liposomes (SSL) composed of distearoylphosphatidylcholine, cholesterol, dicetylphosphate and distearoylphosphatiodylethanolamine-N-poly(ethyleneglycol) 2000 (DSPE-PEG 2000) were made by reverse phase evaporation method to prolong biological half-life and decrease toxic side effect of drug. Streptozocin (572), a water-soluble antitumor agent with short half-life, was selected as a model drug. The size of SSL was controlled by polycarbonate extrusion to 100 nm which is adequate size for long circulation in plasma. The release rate of drugs from SSL in PBS was evaluated. And the stability of STZ-containing liposomes against drug leakage into rat plasma was evaluated in order to investigate the interaction of liposome and plasma protein. Incorporation of DSPE-PEG 2000 into conventional liposomes significantly decreased the drug leakage into rat plasma.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1544-1544
• /
• 2015

재료의 종류 및 특성에 따른 전기 반응 약물방출 특성을 확인하기 위하여 전압을 이용한 약물방출 시스템을 설계 하였으며 각각의 재료의 특성에 따른 약물방출 특성을 확인하였다. 약물방출은 활성탄소섬유에 친수성 관능기를 도입할 경우 방출되는 약물의 양이 37% 감소하였다. 한편 PVA에 카본블랙을 첨가하여 전도성을 향상 시킨 경우 11%의 약물만을 방출하던 PVA가 대부분의 약물(98%)을 방출하였다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권2호
• /
• pp.73-79
• /
• 2014

Covalent attachment of 1, 4-dimethylnaphthalene (DMN) based endoperoxide forming subunits to a polyvinyl butyral (PVB) backbone has been achieved. The functionalized polymer materials prepared and characterized here can serve as biocompatible carrier systems for studying cellular uptake, intermediate storage and delayed release of singlet oxygen, which opens up new doors for optimizing a variety of medical applications of photogenerated DMN-endoperoxides such as antiviral, antibacterial, antiplasmodial and antitumor activity.

• 한국연소학회지
• /
• 제15권2호
• /
• pp.19-26
• /
• 2010

Combustion behavior of pulverized coal particles in a post-combustion gas reactor was investigated. Radiation emission from coal particles were analyzed by direct photograph and $CH^*$ radical chemiluminescence intensity. Coal particles were sampled during the combustion and were observed by scanning electron microscopy (SEM) and cross section micrograpy technique. Two coal types(one bituminous and one subbituminous coals typically used in the Korean power plants) were tested at typical combustion environment. Gas flow conditions were controlled to represent temperature and oxygen concentration. Experimental data were discussed along with conceptual descriptions of pulverized coal combustion, where particle heat-up, release and combustion of volatiles, and char combustion were sequentially progressed.

• Journal of Pharmaceutical Investigation
• /
• 제24권3호
• /
• pp.167-176
• /
• 1994

The microcapsules of amoxicillin using stearyl alcohol and polyethyleneglycol 8000 (PEG 8000) were prepared by a emulsion melted-cooled process in water phase. The size distribution, dissolution test, observation with SEM and in vivo test were investigated. The microcapsules obtained were spherical, uniform and free flowing particles. The release of drug from microcapsule was increased in proportional to the content of PEG 8000. As the PEG 8000 content increased, the particle size of microcapsule was decreased. Sanning electron micrograph study revealed that microcapsules had comparatively rough surfaces as drug content was increased. The $AUC_{0-12}$ after administration of amoxicillin microcapsules was more increased 40% as compared with the AUC after administration of amoxicillin powder in rabbits.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.52-62
• /
• 1997

Abstract Polyurethanes have been designed and fabricated into membranes with unique separation properties. Moreover, polyurethane microcapsules also have been reported actively as controlled release materials for their excellent blood compatibility, tensile strength and permeability. In this study, polyurethane microcapsules were synthesized by interfacial polymerization in an aqueous poly(ethylene glycol) dispersion of toluene diisocyanate in perfume oil using poly(vinyl alcohol) as the stabilizing agent. The effect of a few important process conditions on the average particle size and distributions, morphologies, and thermal properties to design microcapsules for the sustained release system was investigated.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.418-423
• /
• 2008

Poly[(R)-3-hydroxy butyrate] (PHB) and methoxy poly(ethylene glycol) (mPEG) were conjugated by the transesterification reaction with tin(II)-ethylhexanoate (Sn(Oct)-II) as a catalyst. Hydrophobic PHB and hydrophilic mPEG formed an amphiphilic block copolymer which was formed with the self-assembled polymeric micelle in aqueous solution. In this study, we tried to determine the optimum ratio of hydrophobic/hydrophilic segments for controlled drug delivery. The particle size and shape of the polymeric micelle were measured by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Their size were 61-102 nm with various block ratios. Griseofulvin was loaded in the polymeric micelle as a hydrophobic model drug. The loading efficiency and release profile were measured by high performance liquid chromatography (HPLC). The model drug in our system was constantly released for 48 h.