• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1084-1089
• /
• 2000

The basic equations are derived for the analysis of a stepped labyrinth gas seal which are generally used in high performance compressors, gas turbines, and steam turbines. The Bulk-flow is assumed for a single cavity control volume and the flow is assumed to be completely turbulent in circumferential direction. Moody's wall-friction-factor formula is used for the calculation of wall shear stresses in the single cavity control volume. For the reaction force developed by the seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about a centered position. Integration of the resultant first-order pressure distribution along and around the seal defines the rotordynamic coefficients of the stepped labyrinth gas seal. The leakage and rotordynamic characteristic results of the stepped labyrinth gas seal are presented and compared with Scharrer's theoretical analysis using Blasius' wall-friction-factor formula.

• 한국유체기계학회 논문집
• /
• 제4권2호
• /
• pp.15-21
• /
• 2001

Basic equations and their solution procedure we derived for the analysis of an annular pump seal in which the rotor has a large static displacement from the centered position. The Bulk-flow is assumed for a control volume set in the seal clearance and the flow is assumed to be completely turbulent in axial and circumferential direction. Moody's wall-friction-factor formula is used for the calculation of wall shear stresses in the control volume. For the reaction force developed by the seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about an eccentric position. Flow variables are expanded by using Fourier series for the solution procedure. Integration of the resultant first-order pressure distribution along and around the seal defines the 12 elements of rotordynamic coefficients of the eccentric annular pump seal. The results of leakage and rotordynamic coefficients aye presented and compared with the Marquette's experimental results and the San Andres' theoretical analysis.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.25-37
• /
• 2024

PURPOSE. To investigate the effect of sintering programs and surface treatments on surface properties, phase transformation and flexural strength of monolithic zirconia. MATERIALS AND METHODS. Zirconia specimens were sintered using three distinct sintering programs [classic (C), speed (S), and superspeed (SS)] (n = 56, each). One sample from each group underwent scanning electron microscopy (SEM) and grain size analysis following sintering. Remaining samples were divided into five subgroups (n = 11) based on the surface treatments: control (CL), polish (P), glaze (G), grind + polish (GP), and grind + glaze (GG). One sample from each subgroup underwent SEM analysis. Remaining samples were thermally aged. Monoclinic phase volume, surface roughness, and three-point flexural strength were measured. Monoclinic phase volume and surface roughness were analyzed by Kruskal-Wallis and Dunn tests. Flexural strength was analyzed by two-way ANOVA and Weibull analysis. The relationships among the groups were analyzed using Spearman's correlation analysis. RESULTS. Sintering program, surface treatment, and sintering × surface treatment (P ≤ .010) affected the monoclinic phase volume, whereas the type of surface treatment and sintering × surface treatment affected the surface roughness (P < .001). Type of sintering program or surface treatment did not affect the flexural strength. Weibull analysis revealed no significant differences between the m and σ_o values. Monoclinic phase volume was positively correlated with surface roughness in the SGG and SSP groups. CONCLUSION. After sintering monolithic zirconia in each of the three sintering programs, each of the surface treatments can be used. However, for surface quality and aging resistance, G or GG can be recommended as a surface finishing method.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1994년도 춘계학술발표회 초록집
• /
• pp.138-143
• /
• 1994

A simplified steam generator model has been developed for the simulation of the operational transients of CANDU nuclear power plant. For the analysis of the secondary side, a control volume approach is used and the flow conservation equations are applied for each control volume. The typical steam generator control logic such as the level control and the pressure control are incorporated into the steam generator model with appropriate interface conditions. The steam line including ASDV, CSDV, and governor valve also has been modeled. Test results for typical operational transient case show reasonable transient behavior of steam generator in a real time basis, which is promising for a CANDU engineering simulator.

• 농업과학연구
• /
• 제44권4호
• /
• pp.487-494
• /
• 2017

Spinosad and spinetoram are widely used insecticides for the control of lepidopteran larvae, leaf miners, and thrips; however, they might also have low toxicity toward beneficial insects like bees. Because these pesticides are easily photolyzed by ultraviolet radiation, the QuEChERS method, with its simple pretreatment procedure, is often used for analyzing residues of spinosad and spinetoram. The present study performed a residue analysis using a modified QuEChERS method by pretreating with ammonium salt. The limit of detection (LOD) of the modified method was 0.05 mg/kg and the limit of quantification (LOQ) was 0.25 mg/kg. The coefficient of determination ($R^2$) for the calibration curve was 0.999. Also, we examined any change in the adhesion of spinosad and spinetoram on the plants depending on a spray volume. The adhesion was approximately 70% when the spray volume was increased from 60 L to 120 L per 10 a whereas the adhesion was approximately 37% when the spray volume was increased from 125 L to 250 L. This showed that the amount of adhesion decreased with the higher spray volume. The efficacy result of spinetoram was that over 90% of Frankliniella occidentalis was controlled with the application volume of 125 L per 10 a. Therefore, the result of this study indicates that control of insects is effective and sufficient with a spray volume of 125 L per 10 a in paprika cultivation facilities.

• 환경영향평가
• /
• 제16권5호
• /
• pp.341-350
• /
• 2007

Lake Youngrang is a lagoon whose effluent flows into the East Sea. Because two resort towns and two golf courses are situated at the lake basin, many tourists visit this area. Stormwater runoff surveys were carried out for the eight storm events from 2004 to 2005 in the eutrophic lake watershed to give a basic data for the diffuse pollution control of the lake. Dimensionless mass-volume curves indicating the distribution of pollutant mass vs. volume were used to analyze the first flush phenomenon. The mass-volume curves were fitted with a power function and polynomial equation curves. The regression analysis showed that the polynomial equation curves were better than the power function in representing the tendency of the first flush, and second degree polynomial equation curves indicated the strength of the first flush effectively.

• 대한교통학회지
• /
• 제29권2호
• /
• pp.7-14
• /
• 2011

본선 교통류 제어 방안 중 가변속도제어 모형을 제시하고 서울 내부순환로를 중심으로 효과를 검증하였다. 차량 검지기로부터 수집된 데이터 보정 및 평활화 수행후 패턴분석을 통해 도시고속도로의 평일 상태를 4가지로 분류하고 중심 값을 산출하였다. 그리고 분석단위의 상태를 판단하기 위한 상태변수로 전이교통량, 평균밀도, 평균속도를 설정하였으며 제시된 모형과 시나리오에 근거하여 검증한 결과 안전성 및 효율성을 향상시킬 수 있었다. 또한 유입교통량에 따라 가변속도제어의 감속 정도와 유효 적용시간을 산출하였다.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.9-13
• /
• 2019

본 논문에서는 원가 절감을 위한 개선된 $165^{\circ}$ 12 스텝 제어를 고려한 브러시리스 DC 전동기의 최적화 설계에 대하여 논한다. 개선된 12 스텝 제어는 기존 제어의 도통각 $150^{\circ}$을 확장시켜 전동기의 출력을 향상 시킬 수 있다. 향상된 전동기 출력을 고려한 반응 표면법을 이용한 최적화 설계를 통해서 회전자, 고정자 및 영구자석의 부피를 감소시켜 원가절감이 가능한 설계를 제시한다. 제안된 설계는 기존 전동기의 요구 사양 및 효율 향상을 만족하고 기존 전동기 중량의 약 3.5%를 저감하였다. 유한요소법을 이용한 전자계 해석을 통해 최적화 설계의 타당성을 입증하였다.

• 한국생활과학회지
• /
• 제22권6호
• /
• pp.723-736
• /
• 2013

To examine the quality characteristics of bread made of different amounts of chia seed powder, a functional food ingredient, this study made bread by adding chia seed powder by 1%, 3%, and 5% of the flour weight. When bread dough properties were determined using mixograph, all doughs were appropriate for bread-making. In the evaluation of fermentation rate, the dough with 3% of chia seed powder CS 3 showed the most favorable fermentation rate during the first 60-min fermentation of the bread. According to CrumbScan, the fineness of bread pores were higher in control group than bread loaves containing chia seed powder. The volume of bread in control group was significantly lower than those of other experimental groups. The volume and specific volume were highest when chia seed powder was added by 3%. According to preference analysis, appearance and taste was best in CS 3, showing the highest overall score in preference. Therefore, the optimum amount of chia seed powder is identified to be 3% in bread-making.

• 한국정밀공학회지
• /
• 제12권11호
• /
• pp.125-131
• /
• 1995

Pneumatic System has been mainly used as main equipment for actuation and control of fluid force in manufacturing industry. For velocity control of piston, meter-out restriction method is used in many cases. In this systems, meter-out restriction method is adopted for analysing the Dynamic Charging and Discharging Process which is Variable Volume Chamber. Experiments has been conducted for different supply pressure condition. As a experimental result, charge side chamber pressure rises to supply pressure rapidily and discharge side chamber pressure decreases. Also, when the air in the cylinder is discharged, tempdrature of air decreases steeply. Restriction of the Cylinder sometimes freeze and it dose not function. The result will be useful for the analysis of pneumatic system.