• ETRI Journal
• /
• v.30 no.2
• /
• pp.227-237
• /
• 2008

In this paper, an algorithm that provides absolute and proportional differentiation of packet delays is proposed with the objective of enhancing quality of service in future packet networks. It features an adaptive scheme that adjusts the target delay for every time slot to compensate the deviation from the target delay, which is caused by prediction error on the traffic to arrive at the next time slot. It predicts the traffic to arrive at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot. The difference between them is utilized by the delay control operation for the next time slot to offset it. Because the proposed algorithm compensates the prediction error continuously, it shows superior adaptability to bursty traffic and exponential traffic. Through simulations we demonstrate that the algorithm meets the quantitative delay bounds and is robust to traffic fluctuation in comparison with the conventional non-adaptive mechanism. The algorithm is implemented with VHDL on a Xilinx Spartan XC3S1500 FPGA, and the performance is verified under the test board based on the XPC860P CPU.

• Convergence Security Journal
• /
• v.6 no.1
• /
• pp.55-63
• /
• 2006

In this paper, an algorithm that provisions absolute differentiation of packet delays is proposed with an objective for enhancing quality of service (QoS) in future packet networks. It features an adaptive scheme that compensates the deviation for prediction on the traffic to be arrived continuously. It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot, and derives the deviation between the two quantity. The deviation is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the constant rate traffic. It is demonstrated through simulation that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional mechanism.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.69-77
• /
• 2015

MANET is composed of only the mobile nodes have a limited transmission range. The dynamic topology by the frequent movement of nodes makes routing difficult and is also cause exposed to security vulnerabilities. In this paper, we propose the security routing technique consisted of mechanism of two steps in order to respond effectively to attack by the modification of the routing information and transmit secure data. The hierarchical structure is used and the authentication node that issues the key of the nodes within each cluster is elected in this proposed method. The authentication node manages key issues and issued information for encrypting the routing information from the source node. The reliability value for each node is managed to routing trust table in order to secure data transmission. In the first step, the route discovery is performed using this after the routing information is encrypted using the key issued by the authentication node. In the second step, the average reliability value of the node in the found path is calculated. And the safety of the data transmission is improved after the average reliability value selects the highest path. The improved performance of the proposed method in this paper was confirmed through comparative experiments with CBSR and SEER. It was confirmed a better performance in the transmission delay, the amount of the control packet, and the packet transmission success ratio.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.846-856
• /
• 2016

Wireless sensor networks (WSNs) are widely applied in monitoring and control of environment parameters. It is sometimes necessary to disseminate data through wireless links after they are deployed in order to adjust configuration parameters of sensors or distribute management commands and queries to sensors. Several approaches have been proposed recently for data dissemination in WSNs. However, none of these approaches achieves both high efficiency and low complexity simultaneously. To address this problem, cluster-tree based network architecture, which divides a WSN into hierarchies and clusters is proposed. Upon this architecture, data is delivered from base station to all sensors in clusters hierarchy by hierarchy. In each cluster, father broadcasts data to all his children with instantly decodable network coding (IDNC), and a novel scheme targeting to maximize total transmission gain (MTTG) is proposed. This scheme employs a new packet scheduling algorithm to select IDNC packets, which uses weight status feedback matrix (WSFM) directly. Analysis and simulation results indicate that the transmission efficiency approximate to the best existing approach maximum weight clique, but with much lower computational overhead. Hence, the energy efficiency achieves both in data transmission and processing.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.451-458
• /
• 2010

To detect and recover packet losses over wireless links is very important in terms of reliability in packet transmission. Most wireless communication systems adopt an automatic repeat request (ARQ) protocol operating at link layer. However, it has been constantly addressed that the interaction not harmonized sufficiently between ARQ and TCP rather degrades TCP performance. In this paper, therefore, we propose an improved scheme from the aspect of the interaction with TCP loss recovery mechanism that can be applied to selective repeat ARQ (SR-ARQ) protocol and prove that the proposed scheme improves TCP performance significantly by OPNET simulations.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2406-2412
• /
• 2015

Multi-user multi-input multi-output (MU-MIMO) system has attracted the 4^th generation wireless network as one of core technique for performance enrichment. In this system rate control is a challenging problem and another problem is optimization. Proper scheduling can resolve these problems by deciding which set of user and at which rate the users send their data. This paper proposes a new multi-parameter based scheduling (MPS) for downlink multi-user multiple-input multiple-output (MU-MIMO) system under space-time block coding (STBC) transmissions. Goal of this MPS scheme is to offer improved link level performance in terms of a low average bit error rate (BER), high packet delivery ratio (PDR) with improved resource utilization and service fairness among the user. This scheme allows the set of users to send data based on their channel quality and their demand rates. Simulation compares the MPS performance with other scheduling scheme such as fair scheduling (FS), normalized priority scheduling (NPS) and threshold based fair scheduling (TFS). The results obtained prove that MPS has significant improvement in average BER performance with improved resource utilization and fairness as compared to the other scheduling scheme.

• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.2
• /
• pp.138-145
• /
• 2010

In this paper, we consider the information processing system, which organizes the collected data to meaningful information when the number of data collected from multiple sources reaches to a predetermined number, and performs any action by processing the collected data, or transmits to other devices or systems. We derive an analytical model to calculate the time until it takes to process information after starting to collect data. Therefore, in order to complete the processing data within certain time constraints, we develop some design criteria to control various parameters of the information processing system. Also, we analyze the discrete time model for packet switching networks considering data with no particular arrival nor drop pattern. We analyze the relationship between the number of required packets and average information processing time through numerical examples. By this, we show that the proposed model is able to design the system to be suitable for user's requirements being complementary the quality of information and the information processing time in the system with time constraints.

• Journal of Internet Computing and Services
• /
• v.5 no.5
• /
• pp.39-48
• /
• 2004

For transporting real-time multimedia traffic, RTP is considered as one of the most promising protocols operating at application layer. In order to manage and control the real-time multimedia traffic within networks, network managers need to monitor and analyze the traffic delivering through their networks. However, conventional traffic analyzing tools can not exactly classify and analyze the real-time multimedia traffic using RTP on the basis of real-time as well as non-real-time operations. In this paper, we propose an efficient online classification method of RTP packets, which can be used on high-speed network links. The accuracy and efficiency of the proposed methodhave been tested using captured data from a KIX node with 100 Mbps links, which interconnects between domestic and overseas Internet networks and is operated by NCA.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.2
• /
• pp.101-114
• /
• 2016

A model-based systems engineering (MBSE) approach to implementing hardware-based network cybersecurity controls for APR1400 non-safety data network is presented in this work. The proposed design was developed by implementing packet filtering and deep packet inspection functions to control the unauthorized traffic and malicious contents. Denial-of-Service (DoS) attack was considered as a potential cybersecurity issue that may threaten the data availability and integrity of DCS gateway servers. Logical design architecture was developed to simulate the behavior of functions flow. HDL-based physical architecture was modelled and simulated using Xilinx ISE software to verify the design functionality. For effective modelling process, enhanced function flow block diagrams (EFFBDs) and schematic design based on FPGA technology were together developed and simulated to verify the performance and functional requirements of network security controls. Both logical and physical design architectures verified that hardware-based cybersecurity controls are capable to maintain the data availability and integrity. Further works focus on implementing the schematic design to an FPGA platform to accomplish the design verification and validation processes.

• Journal of KIISE:Information Networking
• /
• v.28 no.2
• /
• pp.242-250
• /
• 2001

This paper deals with the TCP bandwidth guarantee problem in a differentiated serviccs(Diffserv) network. The Diffserv assured s<:rvice differentiates packet drop probabilities to guarantee the promised bandwidth even under network congestion. However a token buffer marker fails to show adequate performance because TCI' generates packets according to the unique Tel' congestion control mechanism. We propose a marker that uses a data buffer as well as a token buffer. The marker with a data buffer works well with the assured service mechanism because it smooths Tel' traffic. We showed that the marker with a data buffer achieves the target throughput better than a marker with a token buffer only. We also showed that the optimal buffer size is proportional to reserved throughput and HTT.