• Journal of KIISE:Information Networking
• /
• v.27 no.1
• /
• pp.68-75
• /
• 2000

In this paper, a media access control protocol is proposed for voice/data integrated services in the packet CDMA network, and the performance of the proposed protocol is analyzed. The proposed protocol uses the spreading code sensing and the reservation schemes. This protocol gives higher priority to the delay-sensitive voice traffic than to the data traffic. A voice terminal can reserve an available spreading code during a talkspurt to transmit multiple voice packets. On the other hand, whenever a data packet is generated, the data terminal transmits the packet through one of the available spreading codes that are not used by the voice terminals. In this protocol, the voice packets do not come into collision with the data packets. The numerical results show that this protocol can increase the maximum number of voice terminals. The performance for the data traffic degrades by increasing the voice traffic load because of the low priority. But it shows that the data traffic performance can be increased in proportion to the number of spreading codes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.652-662
• /
• 2001

A WDM/SCM multiple access protocol suitable for optical double star networks is proposed. A node-grouping scheme is employed in the protocol, which is accomplished by connecting some nodes through passive star sub-hubs forming a group. The resulting multiple groups in a network are then connected through a central passive star hub resulting in a passive double star network. Each group is pre-assigned a WDM channel as its home channel, and SCM channels are used to identify the packet reception at each node. [n the proposed protocol, the average packet delay is remarkably reduced since the frame consists of the number of groups rather than the number of network nodes. Furthermore, additional reduction of the average packet delay is achieved by limiting the propagation paths of control packets to the roundtrip between source nodes and sub-hub using a double star network. It is shown in the performance evaluations using analytic and simulation model that the proposed protocol has the advantages of the higher channel utilization and excellent network throughput and average packet delay characteristic.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.85-98
• /
• 2010

An advanced and proactive response mechanism against diverse attacks on All-IP network should be proposed for enhancing its security and reliability on open network. There are two main research works related to this study. First one is the SPIE system with hash function on Bloom filter and second one is the Sinkhole routing mechanism using BGP protocol for verifying its transmission path. Therefore, advanced traceback and network management mechanism also should be necessary on All-IP network environments against DDoS attacks. In this study, we studied and proposed a new IP traceback mechanism on All-IP network environments based on existing SPIE and Sinkhole routing model when diverse DDoS attacks would be happen. Proposed mechanism has a Manager module for controlling the regional router with using packet monitoring and filtering mechanism to trace and find the attack packet's real transmission path. Proposed mechanism uses simplified and optimized memory for storing and memorizing the packet's hash value on bloom filter, with which we can find and determine the attacker's real location on open network. Additionally, proposed mechanism provides advanced packet aggregation and monitoring/control module based on existing Sinkhole routing method. Therefore, we can provide an optimized one in All-IP network by combining the strength on existing two mechanisms. And the traceback performance also can be enhanced compared with previously suggested mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1164-1170
• /
• 2002

In the ACE2000 MPLS system, MPLS Interface Module(MIM) is composed of an ATM Interface Module and a HFMA performing a packet forwarding. In the MIM, the HFMA RSAR receive cells from the Physical layer and reassemble the cells. And the IP Lookup controller perform a packet forwarding after packet classification. Forwarded packet is segmented into cells in the HFMA TSAR and transfer to the ALMA for the transmission to an ATM cell switch. When the MIM make use of an ATM Interface Module, it directly connect the ALMA with a PHY layer using the UTOPIA Level2 interface. Then, an ALMA performs Master Mode. Also, the HFMA TSAR performs the Master Mode in the MIM. Therefore, the UTOPIA-L2 Controller of the Slave Mode require for interfacing between an ALMA and a HFHA TSAR. In this paper, we implement the architecture and cell control mechanism for the UTOPIA-L2 Controller supporting Multi-ports.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.396-405
• /
• 2009

An interlocking equipment of railway signalling systems should have very high functional safety and reliability properties because of its vital railway protection functionality. In order to achieve the required safety and reliability level, an engineer, in general, designs and implements the interlocking equipment to operate under RTOS(Realtime Operating System) environment, and the control hardware architecture redundant to cope with the random failures of system or subsystem. In such an architecture, it's very difficult to implement the interlocking equipment to communicate with various interface systems including the signal operator's terminal. In this paper, we propose a dual ethernet network topology and dual packet seamless transfer protocol algorithm for railway signaling system such as the interlocking equipment. We verify in this paper that the proposed DPST protocol algorithm has the evidence of its robust properties against the random hardware faults and communication errors. The proposed communication structure and algorithm is implemented in the electronic interlocking equipment for the private railway system of Hyundai Steel Company and its performance and properties are validated on the guideline of European Railway Standard EN50159.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.141-149
• /
• 2013

IETF 6LoWPAN standard technique has been studied in IoT environment to support the IPv6 packet communication. 6LoWPAN protocol for transmission of packets mainly in the AODV routing protocol and a variety of extended techniques have been investigated. In particular, consisting of nodes with limited resources in a network error occurs when the 6LoWPAN reliable data transfer and fast routing method is needed. To this end, in this paper, we propose resilient routing protocol and extension of IETF LOAD algorithm, for optimal recovery path, More specifically, the optimal recovery path setup algorithm, signal flow, and detailed protocols for the verification of the reliability of packet transmission mathematical model is presented. The proposed protocol techniques to analyze the performance of the NS-3 performance through the simulation results that is end-to-end delay, throughput, packet delivery fraction and control packet overhead demonstrated excellence in comparison with existing LOAD.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.65-72
• /
• 2003

In this paper, the new scheme using a Combined Cache(CC) that combing the Paging and Routing Cache(PRC) and an alternative handoff method according to the type of data transmission for achieving the efficient realtime communication. The PRC and quasi-soft handoff method reduce the path duplication. But they increase the network traffic load because of the handoff state packet of Mobile Host(MH). Moreover the use the same handoff method without differentiating the type of transmission data. Those problems are solved by operating U with a semi-soft handoff method for realtime data transmission and with a hard handoff method for non-realtime data transmission. As a result or simulation a better performance is obtained because of the reduction of the number of control packet in case that the number of cells are below 20. And the packet arrival time and loss of packet decreased significantly for realtime data transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.304-310
• /
• 2009

In this paper, we evaluate the performance of VoIP in OFDMA-based relay systems with various capabilities of relays. We classify relays according to capability as "mid-capability (MC)" and "high-capability (HC)" relay. In system with HC relays, not only base station (BS) but also relay station (RS) performs scheduling at its ova whereas only BS performs scheduling in system with MC relays using the information reported by MS (i.e. the received signal-to-interference-plus-noise ratio (SINR) of mobile station (HS), the amount of MS traffic, etc). In system with MC relays, the controling overhead of BS is larger than that of system with HC relays. However, since BS has all MS information, efficient resource allocation and scheduling is possible. We derived the "average packet delay," "good packet ratio," and "cell goodput" in a VoIP environment. The simulation results demonstrate that the system with MC relays has better VoIP performance over that with HC relays.

• Korean Journal of Remote Sensing
• /
• v.18 no.6
• /
• pp.359-367
• /
• 2002

In this paper, a new embedded wavelet packet image coder algorithm is proposed for an effective image coder using correlation between partitioned coefficients. This new algorithm presents parent-child relationship for reducing image reconstruction error using relations between individual frequency sub-bands. By parent-child relationship, every coefficient is partitioned and encoded for the zerotree data structure. It is shown that the proposed wavelet packet image coder algorithm achieves low bit rates and rate-distortion. It also demonstrates higher PSNR under the same bit rate and an improvement in image compression time. The perfect rate control is compared with the conventional method. These results show that the encoding and decoding processes of the proposed coder are simpler and more accurate than the conventional ones for texture images that include many mid and high-frequency elements such as aerial and satellite photograph images. The experimental results imply the possibility that the proposed method can be applied to real-time vision system, on-line image processing and image fusion which require smaller file size and better resolution.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.5
• /
• pp.515-525
• /
• 2007

In this paper, we develop a co-design methodology of stochastic optimal controllers and network parameters that optimizes the overall quality of control (QoC) in networked control systems (NCSs). A new dynamic model for NCSs is provided. The relationship between the system stability and performance and the sampling frequency is investigated, and the analysis of co-design of control and network parameters is presented to determine the working range of the sampling frequency in an NCS. This optimal sampling frequency range is derived based on the system dynamics and the network characteristics such as data rate, time-delay upper bound, data-packet size, and device processing time. With the optimal sampling frequency, stochastic optimal controllers are designed to improve the overall QoC in an NCS. This co-design methodology is a useful rule of thumb to choose the network and control parameters for NCS implementation. The feasibility and effectiveness of this co-design methodology is verified experimentally by our NCS test bed, a ball magnetic-levitation (maglev) system.